LANCOM-GS-2328P-MIB DEFINITIONS ::= BEGIN IMPORTS DisplayString,MacAddress FROM SNMPv2-TC MODULE-COMPLIANCE,OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF ifIndex FROM RFC1213-MIB enterprises,MODULE-IDENTITY,OBJECT-TYPE,NOTIFICATION-TYPE,Counter32,Counter64,IpAddress FROM SNMPv2-SMI InetAddress FROM INET-ADDRESS-MIB MacAddress FROM BRIDGE-MIB; lancomSystems MODULE-IDENTITY LAST-UPDATED "201705160000Z" ORGANIZATION "LANCOM Systems GmbH." CONTACT-INFO "Adenauerstrasse 20 / B2, 52146 Wuerselen, Germany Email: info@lancom.de TEL: +49 (0)2405 49936 0 FAX: +49 (0)2405 49936 99" DESCRIPTION "The MIB module is for LANCOM Systems" ::= { enterprises 2356 } switchingSystems OBJECT IDENTIFIER ::= { lancomSystems 800 } gigabitEthernetSwitches OBJECT IDENTIFIER ::= { switchingSystems 3 } lancomGS2328P OBJECT IDENTIFIER ::= { gigabitEthernetSwitches 2331 } gs2328pSystem OBJECT IDENTIFIER ::= { lancomGS2328P 1 } gs2328pSystemInformation OBJECT IDENTIFIER ::= { gs2328pSystem 1 } gs2328pModelName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pSystemInformation 1 } gs2328pBIOSVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pSystemInformation 2 } gs2328pFirmwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pSystemInformation 3 } gs2328pHardwareMechanicalVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pSystemInformation 4 } gs2328pSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pSystemInformation 5 } gs2328pHostMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pSystemInformation 6 } gs2328pConsoleBaudrate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pSystemInformation 7 } gs2328pRAMSize OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pSystemInformation 8 } gs2328pFlashSize OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pSystemInformation 9 } gs2328pBridgeFDBSize OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pSystemInformation 10 } gs2328pTransmitQueue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pSystemInformation 11 } gs2328pMaximumFrameSize OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pSystemInformation 12 } gs2328pCPULoad OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pSystemInformation 13 } gs2328pFanSpeed OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pSystemInformation 17 } gs2328pTemperature OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pSystemInformation 19 } gs2328pSystemTime OBJECT IDENTIFIER ::= { gs2328pSystem 2 } gs2328pSystemTimeManual OBJECT IDENTIFIER ::= { gs2328pSystemTime 1 } gs2328pSystemTimeManualClockSource OBJECT-TYPE SYNTAX INTEGER {useLocal(0),useNTP(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0 : Use Local Settings, 1 : Use NTP Server." ::= { gs2328pSystemTimeManual 1 } gs2328pSystemTimeManualLocaltime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the system time of the device. The input format is 'Year-Month-Day Hour:Minute:Second'. ex: 2011-01-01 05:43:05 means 2011/1/1 - 05:43:05 . The value range: Year : 2010 - 2090, Mouth : 1 - 12, Day : 1 - 31, Hour : 0 - 23, Minute : 0 - 59, Sec : 0 - 59." ::= { gs2328pSystemTimeManual 2 } gs2328pSystemTimeManualTimeZoneOffset OBJECT-TYPE SYNTAX INTEGER(-720..780) MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the NTP Time Zone. The value range is between -720 and 780 (minutes)." ::= { gs2328pSystemTimeManual 3 } gs2328pSystemTimeManualDaylightSavings OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0 : Disable, 1 : Enable." ::= { gs2328pSystemTimeManual 4 } gs2328pSystemTimeManualTimeSetOffset OBJECT-TYPE SYNTAX Integer32(1..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Daylight Saving Time. The value range is between 1 and 1440 (minutes), Default : 60 (minutes)." ::= { gs2328pSystemTimeManual 5 } gs2328pSystemTimeManualDaylightSavingsType OBJECT-TYPE SYNTAX INTEGER { byDates(0), recurring(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0 : By dates, 1 : Recurring." ::= { gs2328pSystemTimeManual 6 } gs2328pSystemTimeManualDaylightSavingsBydatesFrom OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Start time of By dates Daylight Savings. The input format is 'Year-Month-Day Hour:Minute'. ex: 2011-01-01 05:43 means 2011/1/1 - 05:43 . The value range: Year : 2010 - 2090, Mouth : 1 - 12, Day : 1 - 31, Hour : 0 - 23, Minute : 0 - 59." ::= { gs2328pSystemTimeManual 7 } gs2328pSystemTimeManualDaylightSavingsBydatesTo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the End time of By dates Daylight Savings. The input format is 'Year-Month-Day Hour:Minute'. ex: 2011-01-01 05:43 means 2011/1/1 - 05:43 . The value range: Year : 2010 - 2090, Mouth : 1 - 12, Day : 1 - 31, Hour : 0 - 23, Minute : 0 - 59." ::= { gs2328pSystemTimeManual 8 } gs2328pSystemTimeManualDaylightSavingsRecurringDayFrom OBJECT-TYPE SYNTAX INTEGER { sunday(0), monday(1), tuseday(2), wednesday(3), thursday(4), friday(5), saturday(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Daylight Saving Time Day From. 0 : Sun, 1 : Mon, 2 : Tue, 3 : Wed, 4 : Thu, 5 : Fri, 6 : Sat." ::= { gs2328pSystemTimeManual 9 } gs2328pSystemTimeManualDaylightSavingsRecurringWeekFrom OBJECT-TYPE SYNTAX INTEGER{ firstWeek(1), secondWeek(2), thirdWeek(3), fourthWeek(4), listWeek(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Daylight Saving Time Week From. 1 : first week, 2, 3, 4, 5 : last week" ::= { gs2328pSystemTimeManual 10 } gs2328pSystemTimeManualDaylightSavingsRecurringMonthFrom OBJECT-TYPE SYNTAX INTEGER { jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12) } MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Daylight Saving Time Month From. 1 : Jan, 2 : Feb, 3 : Mar, 4 : Apr, 5 : May, 6 : Jun, 7 : Jul, 8 : Aug, 9 : Sep, 10 : Oct, 11 : Nov, 12 : Dec." ::= { gs2328pSystemTimeManual 11 } gs2328pSystemTimeManualDaylightSavingsRecurringTimeFrom OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Start time of By dates Daylight Savings. The input format is 'Hour:Minute'. ex: 05:43. The value range: Hour : 0 - 23, Minute : 0 - 59." ::= { gs2328pSystemTimeManual 12 } gs2328pSystemTimeManualDaylightSavingsRecurringDayTo OBJECT-TYPE SYNTAX INTEGER { sunday(0), monday(1), tuseday(2), wednesday(3), thursday(4), friday(5), saturday(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Daylight Saving Time Day To. 0 : Sun, 1 : Mon, 2 : Tue, 3 : Wed, 4 : Thu, 5 : Fri, 6 : Sat." ::= { gs2328pSystemTimeManual 13 } gs2328pSystemTimeManualDaylightSavingsRecurringWeekTo OBJECT-TYPE SYNTAX INTEGER{ firstWeek(1), secondWeek(2), thirdWeek(3), fourthWeek(4), listWeek(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Daylight Saving Time Week To. 1 : first week, 2, 3, 4, 5 : last week" ::= { gs2328pSystemTimeManual 14 } gs2328pSystemTimeManualDaylightSavingsRecurringMonthTo OBJECT-TYPE SYNTAX INTEGER { jan(1), feb(2), mar(3), apr(4), may(5), jun(6), jul(7), aug(8), sep(9), oct(10), nov(11), dec(12) } MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Daylight Saving Time Month To. 1 : Jan, 2 : Feb, 3 : Mar, 4 : Apr, 5 : May, 6 : Jun, 7 : Jul, 8 : Aug, 9 : Sep, 10 : Oct, 11 : Nov, 12 : Dec." ::= { gs2328pSystemTimeManual 15 } gs2328pSystemTimeManualDaylightSavingsRecurringTimeTo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Start time of By dates Daylight Savings. The input format is 'Hour:Minute'. ex: 05:43. The value range: Hour : 0 - 23, Minute : 0 - 59." ::= { gs2328pSystemTimeManual 16 } gs2328pSystemTimeNTP OBJECT IDENTIFIER ::= { gs2328pSystemTime 2 } gs2328pSystemTimeNTPTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PSystemTimeNTPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pSystemTimeNTP 1 } gs2328pSystemTimeNTPEntry OBJECT-TYPE SYNTAX GS2328PSystemTimeNTPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pSystemTimeNTPIndex } ::= { gs2328pSystemTimeNTPTable 1 } GS2328PSystemTimeNTPEntry ::= SEQUENCE { gs2328pSystemTimeNTPIndex Integer32, gs2328pSystemTimeNTPServerIPType INTEGER, gs2328pSystemTimeNTPServer DisplayString, gs2328pSystemTimeNTPCurrentMode INTEGER } gs2328pSystemTimeNTPIndex OBJECT-TYPE SYNTAX Integer32(1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION " The index of the ntp entry. " ::= { gs2328pSystemTimeNTPEntry 1 } gs2328pSystemTimeNTPServerIPType OBJECT-TYPE SYNTAX INTEGER { ipv4(0), ipv6(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Default: 0, 0 : IPv4, 1 : IPv6." ::= { gs2328pSystemTimeNTPEntry 2 } gs2328pSystemTimeNTPServer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the NTP Time Server1. You can use the IP address or domain name." ::= { gs2328pSystemTimeNTPEntry 3 } gs2328pSystemTimeNTPCurrentMode OBJECT-TYPE SYNTAX INTEGER { empty(0), active(1), edit(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " 0: Empty 1: Active 2: Edit 3: Delete" ::= { gs2328pSystemTimeNTPEntry 4 } gs2328pSystemTimeNTPRequestInterval OBJECT-TYPE SYNTAX INTEGER(60..999999999) MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the NTP Request Interval. Default : 86400. The value range is between 60 and 999999999 (seconds)." ::= { gs2328pSystemTimeNTP 2 } gs2328pSystemTimeNTPTriesNumber OBJECT-TYPE SYNTAX INTEGER(0..999999999) MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the NTP Number of tries. Default : 4. The value range is between 0 and 999999999." ::= { gs2328pSystemTimeNTP 3 } gs2328pSystemAccount OBJECT IDENTIFIER ::= { gs2328pSystem 3 } gs2328pSystemAccountUsers OBJECT IDENTIFIER ::= { gs2328pSystemAccount 1 } gs2328pSystemAccountUserCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create a user account" ::= { gs2328pSystemAccountUsers 1 } gs2328pSystemAccountUsersTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PSystemAccountUsersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pSystemAccountUsers 2 } gs2328pSystemAccountUsersEntry OBJECT-TYPE SYNTAX GS2328PSystemAccountUsersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pUserIndex } ::= { gs2328pSystemAccountUsersTable 1 } GS2328PSystemAccountUsersEntry ::= SEQUENCE { gs2328pUserIndex Integer32 , gs2328pUserName DisplayString, gs2328pPassword DisplayString, gs2328pUserPrivilegeLevel Integer32 , gs2328pAccountUserRowStatus INTEGER } gs2328pUserIndex OBJECT-TYPE SYNTAX Integer32 (1..20) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pSystemAccountUsersEntry 1 } gs2328pUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Please use a combination of letters, numbers and underscores" ::= { gs2328pSystemAccountUsersEntry 2 } gs2328pPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Please use ASCII printable code except Quotation mark, Colon (punctuation), Less-than sign, Greater-than sign, At sign, Question mark and Space (punctuation)" ::= { gs2328pSystemAccountUsersEntry 3 } gs2328pUserPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "default:1 User privilege level range : 1 - 15" ::= { gs2328pSystemAccountUsersEntry 4 } gs2328pAccountUserRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), edit(3), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION " 1: active 2: notInservice 3: edit 4: destroy 5: undo" ::= { gs2328pSystemAccountUsersEntry 5 } gs2328pSystemAccountPrivilegeLevel OBJECT IDENTIFIER ::= { gs2328pSystemAccount 2 } gs2328pAccountPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 1 } gs2328pAggregationPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 2 } gs2328pDiagnosticsPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 3 } gs2328pEEEPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 4 } gs2328pEasyportPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 9 } gs2328pGARPPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 10 } gs2328pGVRPPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 11 } gs2328pIPPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 12 } gs2328pIPMCSnoopingPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 13 } gs2328pLACPPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 14 } gs2328pLLDPPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 15 } gs2328pLLDPMEDPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 16 } gs2328pLoopProtectPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 17 } gs2328pMACTablePrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 18 } gs2328pMVRPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 22 } gs2328pMaintenancePrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 24 } gs2328pMirroringPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 25 } gs2328pPortsPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 27 } gs2328pPrivateVLANsPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 28 } gs2328pQoSPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 29 } gs2328pSFlowPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 30 } gs2328pSMTPPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 31 } gs2328pSNMPPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 32 } gs2328pSecurityPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 33 } gs2328pSingleIPPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 34 } gs2328pSpanningTreePrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 35 } gs2328pSystemPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 36 } gs2328pTrapEventPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 37 } gs2328pUPnPPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 38 } gs2328pVCLPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 39 } gs2328pVLANsPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 41 } gs2328pVoiceVLANPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 42 } gs2328pPOEPrivilegeLevel OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Default:15, Range : 1-15. " ::= { gs2328pSystemAccountPrivilegeLevel 43 } gs2328pIP OBJECT IDENTIFIER ::= { gs2328pSystem 4 } gs2328pIPv4 OBJECT IDENTIFIER ::= { gs2328pIP 1 } gs2328pIPv4Configured OBJECT IDENTIFIER ::= { gs2328pIPv4 1 } gs2328pIpv4DHCPClient OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default:0 0: disable 1: enable" ::= { gs2328pIPv4Configured 1 } gs2328pIPv4Address OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { gs2328pIPv4Configured 2 } gs2328pIPv4Mask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { gs2328pIPv4Configured 3 } gs2328pIPv4Gateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { gs2328pIPv4Configured 4 } gs2328pIPv4VLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "default:1" ::= { gs2328pIPv4Configured 5 } gs2328pIPv4DNSServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { gs2328pIPv4Configured 6 } gs2328pIPv4DNSProxy OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0:disable, 1:enable " ::= { gs2328pIPv4Configured 7 } gs2328pIPv4Current OBJECT IDENTIFIER ::= { gs2328pIPv4 2 } gs2328pIpv4CurrentDHCPClient OBJECT-TYPE SYNTAX INTEGER { none(0), renew(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default:0 0: none (for read) 1: renew" ::= { gs2328pIPv4Current 1 } gs2328pIPv4CurrentAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pIPv4Current 2 } gs2328pIPv4CurrentMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pIPv4Current 3 } gs2328pIPv4CurrentGateway OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pIPv4Current 4 } gs2328pIPv4CurrentVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "default:1" ::= { gs2328pIPv4Current 5 } gs2328pIPv4CurrentDNSServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pIPv4Current 6 } gs2328pIPv6 OBJECT IDENTIFIER ::= { gs2328pIP 2 } gs2328pIPv6Configured OBJECT IDENTIFIER ::= { gs2328pIPv6 1 } gs2328pIpv6AutoConfiguration OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default:0 0: disable 1: enable" ::= { gs2328pIPv6Configured 1 } gs2328pIpv6Address OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { gs2328pIPv6Configured 2 } gs2328pIpv6Prefix OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 96" ::= { gs2328pIPv6Configured 3 } gs2328pIpv6Gateway OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { gs2328pIPv6Configured 4 } gs2328pIPv6Current OBJECT IDENTIFIER ::= { gs2328pIPv6 2 } gs2328pIpv6CurrentAutoConfiguration OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "default:0 0: disable 1: enable" ::= { gs2328pIPv6Current 1 } gs2328pIpv6CurrentAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pIPv6Current 2 } gs2328pIpv6CurrentLinkLocalAddress OBJECT-TYPE SYNTAX DisplayString(SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pIPv6Current 3 } gs2328pIpv6CurrentPrefix OBJECT-TYPE SYNTAX DisplayString(SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pIPv6Current 4 } gs2328pIpv6CurrentGateway OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pIPv6Current 5 } gs2328pSyslog OBJECT IDENTIFIER ::= { gs2328pSystem 5 } gs2328pSyslogConf OBJECT IDENTIFIER ::= { gs2328pSyslog 1 } gs2328pServerMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2328pSyslogConf 1 } gs2328pServerAddress1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { gs2328pSyslogConf 2 } gs2328pServerAddress2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { gs2328pSyslogConf 3 } gs2328pSyslogLevel OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 6 (Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pSyslogConf 4 } gs2328pSyslogDetailedInfo OBJECT IDENTIFIER ::= { gs2328pSyslog 2 } gs2328pSyslogDetailedInfoClear OBJECT-TYPE SYNTAX INTEGER { none(0), clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Clear Syslog" ::= { gs2328pSyslogDetailedInfo 1 } gs2328pSyslogDetailedInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PSyslogDetailedInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pSyslogDetailedInfo 2 } gs2328pSyslogDetailedInfoEntry OBJECT-TYPE SYNTAX GS2328PSyslogDetailedInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pSyslogDetailedInfoIndex } ::= { gs2328pSyslogDetailedInfoTable 1 } GS2328PSyslogDetailedInfoEntry ::= SEQUENCE { gs2328pSyslogDetailedInfoIndex Integer32, gs2328pSyslogDetailedInfoLevel DisplayString, gs2328pSyslogDetailedInfoTime DisplayString, gs2328pSyslogDetailedInfoMessage DisplayString } gs2328pSyslogDetailedInfoIndex OBJECT-TYPE SYNTAX Integer32(1..1024) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pSyslogDetailedInfoEntry 1 } gs2328pSyslogDetailedInfoLevel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pSyslogDetailedInfoEntry 2 } gs2328pSyslogDetailedInfoTime OBJECT-TYPE SYNTAX DisplayString(SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pSyslogDetailedInfoEntry 3 } gs2328pSyslogDetailedInfoMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pSyslogDetailedInfoEntry 4 } gs2328pSnmp OBJECT IDENTIFIER ::= { gs2328pSystem 6 } gs2328pSnmpConf OBJECT IDENTIFIER ::= { gs2328pSnmp 1 } gs2328pGetCommunityMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the get-community mode of the SNMP. default : 1, 0: disable, 1: enable. " ::= { gs2328pSnmpConf 1 } gs2328pGetCommunity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the get-community of the SNMP." ::= { gs2328pSnmpConf 2 } gs2328pSetCommunityMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the set-community mode of the SNMP. default : 1, 0: disable, 1: enable. " ::= { gs2328pSnmpConf 3 } gs2328pSetCommunity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the set-community of the SNMP." ::= { gs2328pSnmpConf 4 } gs2328pGetCommunityConfTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PGetCommunityConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show get-community of the SNMP. " ::= { gs2328pSnmpConf 5 } gs2328pGetCommunityConfEntry OBJECT-TYPE SYNTAX GS2328PGetCommunityConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pCommunityConfIndex } ::= { gs2328pGetCommunityConfTable 1 } GS2328PGetCommunityConfEntry ::= SEQUENCE { gs2328pCommunityConfIndex Integer32, gs2328pCommunityConfGetCommunity DisplayString } gs2328pCommunityConfIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " index, range : 1 - 5. " ::= { gs2328pGetCommunityConfEntry 1 } gs2328pCommunityConfGetCommunity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Get/Set the get-community of the SNMP." ::= { gs2328pGetCommunityConfEntry 2 } gs2328pTrapHostConfTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PTrapHostConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of trap host entry. The numbers of entries are given by the value of gs2328pTrapHostConfNumber." ::= { gs2328pSnmpConf 6 } gs2328pTrapHostConfEntry OBJECT-TYPE SYNTAX GS2328PTrapHostConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the entry information for trap host." INDEX { gs2328pTrapHostConfIndex } ::= { gs2328pTrapHostConfTable 1 } GS2328PTrapHostConfEntry ::= SEQUENCE { gs2328pTrapHostConfIndex Integer32, gs2328pTrapHostConfVersion INTEGER, gs2328pTrapHostConfIPType INTEGER, gs2328pTrapHostConfIP DisplayString, gs2328pTrapHostConfPort Integer32, gs2328pTrapHostConfCommunity DisplayString, gs2328pTrapHostConfSeverityLevel INTEGER, gs2328pTrapHostConfSecurityLevel INTEGER, gs2328pTrapHostConfAuthPtc INTEGER, gs2328pTrapHostConfAuthPassword DisplayString, gs2328pTrapHostConfPrivPtc INTEGER, gs2328pTrapHostConfPrivPassword DisplayString, gs2328pTrapHostConfCurrentMode INTEGER } gs2328pTrapHostConfIndex OBJECT-TYPE SYNTAX Integer32(1..6) MAX-ACCESS not-accessible STATUS current DESCRIPTION " The index of the trap host entry. " ::= { gs2328pTrapHostConfEntry 1 } gs2328pTrapHostConfVersion OBJECT-TYPE SYNTAX INTEGER { snmpv2c(2), snmpv3(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The version of the Trap PDU. Version : 2(SNMPv2c), 3(SNMPv3)" ::= { gs2328pTrapHostConfEntry 2 } gs2328pTrapHostConfIPType OBJECT-TYPE SYNTAX INTEGER { ipv4(4), ipv6(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Server IP Type. Default: 4, 4 : IPv4, 6 : IPv6." ::= { gs2328pTrapHostConfEntry 3 } gs2328pTrapHostConfIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This is the IP of the trap host." ::= { gs2328pTrapHostConfEntry 4 } gs2328pTrapHostConfPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the receiving-port number of the trap host. range : 1 - 65535." ::= { gs2328pTrapHostConfEntry 5 } gs2328pTrapHostConfCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The community/security name for the trap PDU." ::= { gs2328pTrapHostConfEntry 6 } gs2328pTrapHostConfSeverityLevel OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Severity Level. 0 : Emerg, 1 : Alert, 2 : Critical, 3 : Error, 4 : Warning, 5 : Notice, 6 : Info, 7 : Debug." ::= { gs2328pTrapHostConfEntry 7 } gs2328pTrapHostConfSecurityLevel OBJECT-TYPE SYNTAX INTEGER { noAuthNoPriv(1), authNoPriv(2), authPriv(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Security Level, NoAuthNoPriv, AuthNoPriv, and AuthPriv. 1 : NoAuthNoPriv, 2 : AuthNoPriv, 3 : AuthPriv. Privacy protocol will be configured as 'DES' automatically if security level is 3(AuthPriv)." ::= { gs2328pTrapHostConfEntry 8 } gs2328pTrapHostConfAuthPtc OBJECT-TYPE SYNTAX INTEGER { md5(1), sha(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication Protocol, there are SHA and MD5 supported presently. 1 : MD5, 2 : SHA." ::= { gs2328pTrapHostConfEntry 9 } gs2328pTrapHostConfAuthPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Authentication Password, is used for authenticating. The return value is always '********'. If the authentication protocol is MD5, the length of password should be 8 ~ 32 characters. If the authentication protocol is SHA, the length of password should be 8 ~ 40 characters." ::= { gs2328pTrapHostConfEntry 10 } gs2328pTrapHostConfPrivPtc OBJECT-TYPE SYNTAX INTEGER { des(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is the Privacy Protocol, which is used in AuthPriv. Only supports DES. An empty string will be returned if the security level is not 3(AuthPriv). 1 : DES." ::= { gs2328pTrapHostConfEntry 11 } gs2328pTrapHostConfPrivPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The password is Privacy Key. The return value is always '********'. This Key must be more than 8 characters, and less than 32 characters." ::= { gs2328pTrapHostConfEntry 12 } gs2328pTrapHostConfCurrentMode OBJECT-TYPE SYNTAX INTEGER { empty(0), active(1), edit(2), delete(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "0:Empty, 1:Active mode, 2:Edit mode, 3:Delete." ::= { gs2328pTrapHostConfEntry 13 } gs2328pSnmpSystem OBJECT IDENTIFIER ::= { gs2328pSnmp 2 } gs2328pSnmpState OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the state of the SNMP. default : 1, 0: disable, 1: enable. " ::= { gs2328pSnmpSystem 1 } gs2328pSnmpEngineID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(5..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the Engine ID of the SNMP. An SNMP engine's administratively-unique identifier." ::= { gs2328pSnmpSystem 2 } gs2328pSnmpCommunities OBJECT IDENTIFIER ::= { gs2328pSnmp 3 } gs2328pSnmpCommunitiesCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create entry" ::= { gs2328pSnmpCommunities 1 } gs2328pSnmpCommunitiesTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PSnmpCommunitiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Create SNMPv1/v2 Communities entry." ::= { gs2328pSnmpCommunities 2 } gs2328pSnmpCommunitiesEntry OBJECT-TYPE SYNTAX GS2328PSnmpCommunitiesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pSnmpCommunitiesIndex } ::= { gs2328pSnmpCommunitiesTable 1 } GS2328PSnmpCommunitiesEntry ::= SEQUENCE { gs2328pSnmpCommunitiesIndex Integer32, gs2328pSnmpCommunitiesCommunity DisplayString, gs2328pSnmpCommunitiesUserName DisplayString, gs2328pSnmpCommunitiesSourceIP IpAddress, gs2328pSnmpCommunitiesSourceMask IpAddress, gs2328pSnmpCommunitiesRowStatus INTEGER } gs2328pSnmpCommunitiesIndex OBJECT-TYPE SYNTAX Integer32(1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pSnmpCommunitiesEntry 1 } gs2328pSnmpCommunitiesCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Up to 32 characters describing Community." ::= { gs2328pSnmpCommunitiesEntry 2 } gs2328pSnmpCommunitiesUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 32 characters describing User Name. " ::= { gs2328pSnmpCommunitiesEntry 3 } gs2328pSnmpCommunitiesSourceIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " SNMP access source ip. " ::= { gs2328pSnmpCommunitiesEntry 4 } gs2328pSnmpCommunitiesSourceMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " SNMP access source address mask. " ::= { gs2328pSnmpCommunitiesEntry 5 } gs2328pSnmpCommunitiesRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy 5: undo" ::= { gs2328pSnmpCommunitiesEntry 6 } gs2328pSnmpUsers OBJECT IDENTIFIER ::= { gs2328pSnmp 4 } gs2328pSnmpUsersCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create entry" ::= { gs2328pSnmpUsers 1 } gs2328pSnmpUsersTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PSnmpUsersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Create SNMPv3 users entry." ::= { gs2328pSnmpUsers 2 } gs2328pSnmpUsersEntry OBJECT-TYPE SYNTAX GS2328PSnmpUsersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pSnmpUsersIndex } ::= { gs2328pSnmpUsersTable 1 } GS2328PSnmpUsersEntry ::= SEQUENCE { gs2328pSnmpUsersIndex Integer32, gs2328pSnmpUsersUserName DisplayString, gs2328pSnmpUsersSecurityLevel INTEGER, gs2328pSnmpUsersAuthenticationProtocol INTEGER, gs2328pSnmpUsersAuthenticationPassword DisplayString, gs2328pSnmpUsersPrivacyProtocol INTEGER, gs2328pSnmpUsersPrivacyPassword DisplayString, gs2328pSnmpUsersRowStatus INTEGER } gs2328pSnmpUsersIndex OBJECT-TYPE SYNTAX Integer32(1..10) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pSnmpUsersEntry 1 } gs2328pSnmpUsersUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Up to 32 characters describing User Name." ::= { gs2328pSnmpUsersEntry 2 } gs2328pSnmpUsersSecurityLevel OBJECT-TYPE SYNTAX INTEGER { noauthnopriv(1), authnopriv(2), authpriv(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " 1: No authentication and no privacy. 2: Authentication and no privacy. 3: Authentication and privacy. " ::= { gs2328pSnmpUsersEntry 3 } gs2328pSnmpUsersAuthenticationProtocol OBJECT-TYPE SYNTAX INTEGER { none(0), md5(1), sha(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 0: None. 1: MD5. 2: SHA " ::= { gs2328pSnmpUsersEntry 4 } gs2328pSnmpUsersAuthenticationPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Authentication Password, is used for authenticating. The return value is always '********'. If the authentication protocol is MD5, the length of password should be 8 ~ 32 characters. If the authentication protocol is SHA, the length of password should be 8 ~ 40 characters. " ::= { gs2328pSnmpUsersEntry 5 } gs2328pSnmpUsersPrivacyProtocol OBJECT-TYPE SYNTAX INTEGER { none(0), des(1), aes(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " 0: None. 1: DES. 2: AES This is the Privacy Protocol, which is used in AuthPriv. An empty string will be returned if the security level is not 3(AuthPriv) " ::= { gs2328pSnmpUsersEntry 6 } gs2328pSnmpUsersPrivacyPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " The password is Privacy Key. The return value is always '********'. This Key must be more than 8 characters, and less than 32 characters. " ::= { gs2328pSnmpUsersEntry 7 } gs2328pSnmpUsersRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy 5: undo" ::= { gs2328pSnmpUsersEntry 8 } gs2328pSnmpGroups OBJECT IDENTIFIER ::= { gs2328pSnmp 5 } gs2328pSnmpGroupsCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create entry" ::= { gs2328pSnmpGroups 1 } gs2328pSnmpGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PSnmpGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Create SNMPv3 groups entry." ::= { gs2328pSnmpGroups 2 } gs2328pSnmpGroupsEntry OBJECT-TYPE SYNTAX GS2328PSnmpGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pSnmpGroupsIndex } ::= { gs2328pSnmpGroupsTable 1 } GS2328PSnmpGroupsEntry ::= SEQUENCE { gs2328pSnmpGroupsIndex Integer32, gs2328pSnmpGroupsSecurityModel INTEGER, gs2328pSnmpGroupsSecurityName DisplayString, gs2328pSnmpGroupsGroupName DisplayString, gs2328pSnmpGroupsRowStatus INTEGER } gs2328pSnmpGroupsIndex OBJECT-TYPE SYNTAX Integer32(1..14) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pSnmpGroupsEntry 1 } gs2328pSnmpGroupsSecurityModel OBJECT-TYPE SYNTAX INTEGER { v1(1), v2c(2), usm(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " 1: v1. 2: v2c. 3: usm." ::= { gs2328pSnmpGroupsEntry 2 } gs2328pSnmpGroupsSecurityName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Up to 32 characters describing User Name." ::= { gs2328pSnmpGroupsEntry 3 } gs2328pSnmpGroupsGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Up to 32 characters describing Group Name." ::= { gs2328pSnmpGroupsEntry 4 } gs2328pSnmpGroupsRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy 5: undo" ::= { gs2328pSnmpGroupsEntry 5 } gs2328pSnmpViews OBJECT IDENTIFIER ::= { gs2328pSnmp 6 } gs2328pSnmpViewsCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create entry" ::= { gs2328pSnmpViews 1 } gs2328pSnmpViewsTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PSnmpViewsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Create SNMPv1/v2 Views entry." ::= { gs2328pSnmpViews 2 } gs2328pSnmpViewsEntry OBJECT-TYPE SYNTAX GS2328PSnmpViewsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pSnmpViewsIndex } ::= { gs2328pSnmpViewsTable 1 } GS2328PSnmpViewsEntry ::= SEQUENCE { gs2328pSnmpViewsIndex Integer32, gs2328pSnmpViewsName DisplayString, gs2328pSnmpViewsType INTEGER, gs2328pSnmpViewsOIDSubtree DisplayString, gs2328pSnmpViewsRowStatus INTEGER } gs2328pSnmpViewsIndex OBJECT-TYPE SYNTAX Integer32(1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pSnmpViewsEntry 1 } gs2328pSnmpViewsName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Up to 32 characters describing view Name." ::= { gs2328pSnmpViewsEntry 2 } gs2328pSnmpViewsType OBJECT-TYPE SYNTAX INTEGER { included(1), excluded(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: included, An optional flag to indicate that this view subtree should be included. 2: excluded, An optional flag to indicate that this view subtree should be excluded." ::= { gs2328pSnmpViewsEntry 3 } gs2328pSnmpViewsOIDSubtree OBJECT-TYPE SYNTAX DisplayString (SIZE (1..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "The OID defining the root of the subtree to add to the named view." ::= { gs2328pSnmpViewsEntry 4 } gs2328pSnmpViewsRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy 5: undo" ::= { gs2328pSnmpViewsEntry 5 } gs2328pSnmpAccess OBJECT IDENTIFIER ::= { gs2328pSnmp 7 } gs2328pSnmpAccessCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create entry" ::= { gs2328pSnmpAccess 1 } gs2328pSnmpAccessTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PSnmpAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Create SNMPv3 Access entry." ::= { gs2328pSnmpAccess 2 } gs2328pSnmpAccessEntry OBJECT-TYPE SYNTAX GS2328PSnmpAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pSnmpAccessIndex } ::= { gs2328pSnmpAccessTable 1 } GS2328PSnmpAccessEntry ::= SEQUENCE { gs2328pSnmpAccessIndex Integer32, gs2328pSnmpAccessGroupName DisplayString, gs2328pSnmpAccessSecurityModel INTEGER, gs2328pSnmpAccessSecurityLevel INTEGER, gs2328pSnmpAccessReadViewName DisplayString, gs2328pSnmpAccessWriteViewName DisplayString, gs2328pSnmpAccessRowStatus INTEGER } gs2328pSnmpAccessIndex OBJECT-TYPE SYNTAX Integer32(1..14) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pSnmpAccessEntry 1 } gs2328pSnmpAccessGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Up to 32 characters describing Group Name." ::= { gs2328pSnmpAccessEntry 2 } gs2328pSnmpAccessSecurityModel OBJECT-TYPE SYNTAX INTEGER { any(0), v1(1), v2c(2), usm(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " 0: any. 1: v1. 2: v2c. 3: usm." ::= { gs2328pSnmpAccessEntry 3 } gs2328pSnmpAccessSecurityLevel OBJECT-TYPE SYNTAX INTEGER { noauthnopriv(1), authnopriv(2), authpriv(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " 1: No authentication and no privacy. 2: Authentication and no privacy. 3: Authentication and privacy. " ::= { gs2328pSnmpAccessEntry 4 } gs2328pSnmpAccessReadViewName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Up to 32 characters describing Read View Name. None is reserved for Empty." ::= { gs2328pSnmpAccessEntry 5 } gs2328pSnmpAccessWriteViewName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Up to 32 characters describing Write View Name. None is reserved for Empty." ::= { gs2328pSnmpAccessEntry 6 } gs2328pSnmpAccessRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy 5: undo" ::= { gs2328pSnmpAccessEntry 7 } ---------------------------------------------------------------------------------------------------- gs2328pConfiguration OBJECT IDENTIFIER ::= { lancomGS2328P 2 } gs2328pPort OBJECT IDENTIFIER ::= { gs2328pConfiguration 1 } gs2328pPortConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PPortConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show port configurations. " ::= { gs2328pPort 1 } gs2328pPortConfigurationEntry OBJECT-TYPE SYNTAX GS2328PPortConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pPortConfPort } ::= { gs2328pPortConfigurationTable 1 } GS2328PPortConfigurationEntry ::= SEQUENCE { gs2328pPortConfPort Integer32, gs2328pPortConfPortMedia DisplayString, gs2328pPortConfLink DisplayString, gs2328pPortConfCurrentSpeed DisplayString, gs2328pPortConfSpeed INTEGER, gs2328pPortConfCurrentFlowControlRx INTEGER, gs2328pPortConfCurrentFlowControlTx INTEGER, gs2328pPortConfFlowControl INTEGER, gs2328pPortConfMaxFrameSize Integer32, gs2328pPortConfExcessiveCollisionMode INTEGER, gs2328pPortConfPowerControl INTEGER, gs2328pPortConfDescription DisplayString } gs2328pPortConfPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pPortConfigurationEntry 1 } gs2328pPortConfPortMedia OBJECT-TYPE SYNTAX DisplayString(SIZE (1..4)) MAX-ACCESS read-only STATUS current DESCRIPTION " Show port media. " ::= { gs2328pPortConfigurationEntry 2 } gs2328pPortConfLink OBJECT-TYPE SYNTAX DisplayString(SIZE (2..4)) MAX-ACCESS read-only STATUS current DESCRIPTION " The current link state. " ::= { gs2328pPortConfigurationEntry 3 } gs2328pPortConfCurrentSpeed OBJECT-TYPE SYNTAX DisplayString(SIZE (6..12)) MAX-ACCESS read-only STATUS current DESCRIPTION " The current link speed of the port. " ::= { gs2328pPortConfigurationEntry 4 } gs2328pPortConfSpeed OBJECT-TYPE SYNTAX INTEGER { disable(0), auto(1), speed10Half(2), speed10Full(3), speed100Half(4), speed100Full(5), speed1Gfull(6), sfpAutoAMS(7), speed100FXAMS(8), speed1000XAMS(9), speed100FX(10), speed1000X(11) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1, 0: disable state, 1: auto, 2: 10 Half, 3: 10 Full, 4: 100 Half, 5: 100 Full, 6: 1G full, only 'Dual Media' port have 7-11 option. Dual Media port default: 7, 7: SFP_Auto_AMS, 8: 100FX_AMS, 9: 1000X_AMS, 10: 100FX, 11: 1000X " ::= { gs2328pPortConfigurationEntry 5 } gs2328pPortConfCurrentFlowControlRx OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), noSupport(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "0: disable 1: enable 2: no support. " ::= { gs2328pPortConfigurationEntry 6 } gs2328pPortConfCurrentFlowControlTx OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), noSupport(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "0: disable 1: enable 2: no support. " ::= { gs2328pPortConfigurationEntry 7 } gs2328pPortConfFlowControl OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), noSupport(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0: disable 1: enable 2: no support. " ::= { gs2328pPortConfigurationEntry 8 } gs2328pPortConfMaxFrameSize OBJECT-TYPE SYNTAX Integer32 (1518..9600) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 9600 , range : 1518 - 9600 " ::= { gs2328pPortConfigurationEntry 9 } gs2328pPortConfExcessiveCollisionMode OBJECT-TYPE SYNTAX INTEGER { discard(0), restart(1), noSupport(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, Excessive Collision Mode : 0: Discard, 1: Restart, 2: no support. " ::= { gs2328pPortConfigurationEntry 10 } gs2328pPortConfPowerControl OBJECT-TYPE SYNTAX INTEGER { disable(0), actiphy(1), dynamic(2), enable(3), noSupport(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, PowerControl : 0: disable, 1: Actiphy, 2: Dynamic (perfectReach), 3: Enable, 4: no support. " ::= { gs2328pPortConfigurationEntry 11 } gs2328pPortConfDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Interface specific description. Up to 47 characters describing this interface. " ::= { gs2328pPortConfigurationEntry 12 } gs2328pPortTrafficStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PPortTrafficStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pPort 2 } gs2328pPortTrafficStatisticsEntry OBJECT-TYPE SYNTAX GS2328PPortTrafficStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pPortTrafficStatisticsPort } ::= { gs2328pPortTrafficStatisticsTable 1 } GS2328PPortTrafficStatisticsEntry ::= SEQUENCE { gs2328pPortTrafficStatisticsPort Integer32, gs2328pPortTrafficStatisticsClear INTEGER, gs2328pPortTrafficRxPackets Counter64, gs2328pPortTrafficRxOctets Counter64, gs2328pPortTrafficRxUnicast Counter64, gs2328pPortTrafficRxMulticast Counter64, gs2328pPortTrafficRxBroadcast Counter64, gs2328pPortTrafficRxPause Counter64, gs2328pPortTrafficRx64Bytes Counter64, gs2328pPortTrafficRx65to127Bytes Counter64, gs2328pPortTrafficRx128to255Bytes Counter64, gs2328pPortTrafficRx256to511Bytes Counter64, gs2328pPortTrafficRx512to1023Bytes Counter64, gs2328pPortTrafficRx1024to1526Bytes Counter64, gs2328pPortTrafficRxExceecd1527Bytes Counter64, gs2328pPortTrafficRxQ0 Counter64, gs2328pPortTrafficRxQ1 Counter64, gs2328pPortTrafficRxQ2 Counter64, gs2328pPortTrafficRxQ3 Counter64, gs2328pPortTrafficRxQ4 Counter64, gs2328pPortTrafficRxQ5 Counter64, gs2328pPortTrafficRxQ6 Counter64, gs2328pPortTrafficRxQ7 Counter64, gs2328pPortTrafficRxDrops Counter64, gs2328pPortTrafficRxCRCorAlignment Counter64, gs2328pPortTrafficRxUndersize Counter64, gs2328pPortTrafficRxOversize Counter64, gs2328pPortTrafficRxFragments Counter64, gs2328pPortTrafficRxJabber Counter64, gs2328pPortTrafficRxFiltered Counter64, gs2328pPortTrafficTxPackets Counter64, gs2328pPortTrafficTxOctets Counter64, gs2328pPortTrafficTxUnicast Counter64, gs2328pPortTrafficTxMulticast Counter64, gs2328pPortTrafficTxBroadcast Counter64, gs2328pPortTrafficTxPause Counter64, gs2328pPortTrafficTx64Bytes Counter64, gs2328pPortTrafficTx65to127Bytes Counter64, gs2328pPortTrafficTx128to255Bytes Counter64, gs2328pPortTrafficTx256to511Bytes Counter64, gs2328pPortTrafficTx512to1023Bytes Counter64, gs2328pPortTrafficTx1024to1526Bytes Counter64, gs2328pPortTrafficTxExceecd1527Bytes Counter64, gs2328pPortTrafficTxQ0 Counter64, gs2328pPortTrafficTxQ1 Counter64, gs2328pPortTrafficTxQ2 Counter64, gs2328pPortTrafficTxQ3 Counter64, gs2328pPortTrafficTxQ4 Counter64, gs2328pPortTrafficTxQ5 Counter64, gs2328pPortTrafficTxQ6 Counter64, gs2328pPortTrafficTxQ7 Counter64, gs2328pPortTrafficTxDrops Counter64, gs2328pPortTrafficTxLateOrExcColl Counter64 } gs2328pPortTrafficStatisticsPort OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 1 } gs2328pPortTrafficStatisticsClear OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 2 } gs2328pPortTrafficRxPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 3 } gs2328pPortTrafficRxOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 4 } gs2328pPortTrafficRxUnicast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 5 } gs2328pPortTrafficRxMulticast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 6 } gs2328pPortTrafficRxBroadcast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 7 } gs2328pPortTrafficRxPause OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 8 } gs2328pPortTrafficRx64Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 9 } gs2328pPortTrafficRx65to127Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 10 } gs2328pPortTrafficRx128to255Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 11 } gs2328pPortTrafficRx256to511Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 12 } gs2328pPortTrafficRx512to1023Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 13 } gs2328pPortTrafficRx1024to1526Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 14 } gs2328pPortTrafficRxExceecd1527Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 15 } gs2328pPortTrafficRxQ0 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 16 } gs2328pPortTrafficRxQ1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 17 } gs2328pPortTrafficRxQ2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 18 } gs2328pPortTrafficRxQ3 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 19 } gs2328pPortTrafficRxQ4 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 20 } gs2328pPortTrafficRxQ5 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 21 } gs2328pPortTrafficRxQ6 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 22 } gs2328pPortTrafficRxQ7 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 23 } gs2328pPortTrafficRxDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 24 } gs2328pPortTrafficRxCRCorAlignment OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 25 } gs2328pPortTrafficRxUndersize OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 26 } gs2328pPortTrafficRxOversize OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 27 } gs2328pPortTrafficRxFragments OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 28 } gs2328pPortTrafficRxJabber OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 29 } gs2328pPortTrafficRxFiltered OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 30 } gs2328pPortTrafficTxPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 31 } gs2328pPortTrafficTxOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 32 } gs2328pPortTrafficTxUnicast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 33 } gs2328pPortTrafficTxMulticast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 34 } gs2328pPortTrafficTxBroadcast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 35 } gs2328pPortTrafficTxPause OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 36 } gs2328pPortTrafficTx64Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 37 } gs2328pPortTrafficTx65to127Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 38 } gs2328pPortTrafficTx128to255Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 39 } gs2328pPortTrafficTx256to511Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 40 } gs2328pPortTrafficTx512to1023Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 41 } gs2328pPortTrafficTx1024to1526Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 42 } gs2328pPortTrafficTxExceecd1527Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 43 } gs2328pPortTrafficTxQ0 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 44 } gs2328pPortTrafficTxQ1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 45 } gs2328pPortTrafficTxQ2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 46 } gs2328pPortTrafficTxQ3 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 47 } gs2328pPortTrafficTxQ4 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 48 } gs2328pPortTrafficTxQ5 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 49 } gs2328pPortTrafficTxQ6 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 50 } gs2328pPortTrafficTxQ7 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 51 } gs2328pPortTrafficTxDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 52 } gs2328pPortTrafficTxLateOrExcColl OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortTrafficStatisticsEntry 53 } gs2328pPortQoSStatistics OBJECT IDENTIFIER ::= { gs2328pPort 3 } gs2328pPortQoSStatisticsClear OBJECT-TYPE SYNTAX INTEGER { none(0), clear(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "default: 0 0: none 1: clear " ::= { gs2328pPortQoSStatistics 1 } gs2328pPortQoSStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PPortQoSStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pPortQoSStatistics 2 } gs2328pPortQoSStatisticsEntry OBJECT-TYPE SYNTAX GS2328PPortQoSStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pPortQoSStatisticsPort } ::= { gs2328pPortQoSStatisticsTable 1 } GS2328PPortQoSStatisticsEntry ::= SEQUENCE { gs2328pPortQoSStatisticsPort Integer32, gs2328pPortQoSQ0Rx Counter64, gs2328pPortQoSQ0Tx Counter64, gs2328pPortQoSQ1Rx Counter64, gs2328pPortQoSQ1Tx Counter64, gs2328pPortQoSQ2Rx Counter64, gs2328pPortQoSQ2Tx Counter64, gs2328pPortQoSQ3Rx Counter64, gs2328pPortQoSQ3Tx Counter64, gs2328pPortQoSQ4Rx Counter64, gs2328pPortQoSQ4Tx Counter64, gs2328pPortQoSQ5Rx Counter64, gs2328pPortQoSQ5Tx Counter64, gs2328pPortQoSQ6Rx Counter64, gs2328pPortQoSQ6Tx Counter64, gs2328pPortQoSQ7Rx Counter64, gs2328pPortQoSQ7Tx Counter64 } gs2328pPortQoSStatisticsPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pPortQoSStatisticsEntry 1 } gs2328pPortQoSQ0Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortQoSStatisticsEntry 2 } gs2328pPortQoSQ0Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortQoSStatisticsEntry 3 } gs2328pPortQoSQ1Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortQoSStatisticsEntry 4 } gs2328pPortQoSQ1Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortQoSStatisticsEntry 5 } gs2328pPortQoSQ2Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortQoSStatisticsEntry 6 } gs2328pPortQoSQ2Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortQoSStatisticsEntry 7 } gs2328pPortQoSQ3Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortQoSStatisticsEntry 8 } gs2328pPortQoSQ3Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortQoSStatisticsEntry 9 } gs2328pPortQoSQ4Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortQoSStatisticsEntry 10 } gs2328pPortQoSQ4Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortQoSStatisticsEntry 11 } gs2328pPortQoSQ5Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortQoSStatisticsEntry 12 } gs2328pPortQoSQ5Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortQoSStatisticsEntry 13 } gs2328pPortQoSQ6Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortQoSStatisticsEntry 14 } gs2328pPortQoSQ6Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortQoSStatisticsEntry 15 } gs2328pPortQoSQ7Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortQoSStatisticsEntry 16 } gs2328pPortQoSQ7Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortQoSStatisticsEntry 17 } gs2328pSFPInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PSFPInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pPort 4 } gs2328pSFPInfoEntry OBJECT-TYPE SYNTAX GS2328PSFPInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pSFPInfoIndex } ::= { gs2328pSFPInfoTable 1 } GS2328PSFPInfoEntry ::= SEQUENCE { gs2328pSFPInfoIndex Integer32, gs2328pSFPInfoPort DisplayString, gs2328pSFPConnectorType DisplayString, gs2328pSFPFiberType DisplayString, gs2328pSFPTxCentralWavelength DisplayString, gs2328pSFPBaudRate DisplayString, gs2328pSFPVendorOUI DisplayString, gs2328pSFPVendorName DisplayString, gs2328pSFPVendorPN DisplayString, gs2328pSFPVendorRev DisplayString, gs2328pSFPVendorSN DisplayString, gs2328pSFPDateCode DisplayString, gs2328pSFPTemperature DisplayString, gs2328pSFPVcc DisplayString, gs2328pSFPMon1Bias DisplayString, gs2328pSFPMon2TxPWR DisplayString, gs2328pSFPMon3RxPWR DisplayString } gs2328pSFPInfoIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pSFPInfoEntry 1 } gs2328pSFPInfoPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pSFPInfoEntry 2 } gs2328pSFPConnectorType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pSFPInfoEntry 3 } gs2328pSFPFiberType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pSFPInfoEntry 4 } gs2328pSFPTxCentralWavelength OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pSFPInfoEntry 5 } gs2328pSFPBaudRate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pSFPInfoEntry 6 } gs2328pSFPVendorOUI OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pSFPInfoEntry 7 } gs2328pSFPVendorName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pSFPInfoEntry 8 } gs2328pSFPVendorPN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pSFPInfoEntry 9 } gs2328pSFPVendorRev OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pSFPInfoEntry 10 } gs2328pSFPVendorSN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pSFPInfoEntry 11 } gs2328pSFPDateCode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pSFPInfoEntry 12 } gs2328pSFPTemperature OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pSFPInfoEntry 13 } gs2328pSFPVcc OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pSFPInfoEntry 14 } gs2328pSFPMon1Bias OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pSFPInfoEntry 15 } gs2328pSFPMon2TxPWR OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pSFPInfoEntry 16 } gs2328pSFPMon3RxPWR OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pSFPInfoEntry 17 } gs2328pVoiceVLAN OBJECT IDENTIFIER ::= { gs2328pConfiguration 2 } gs2328pVoiceVLANConf OBJECT IDENTIFIER ::= { gs2328pVoiceVLAN 1 } gs2328pVoiceVLANMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Voice VLAN mode operation. default: 0, 0: disable 1: enable" ::= { gs2328pVoiceVLANConf 1 } gs2328pVoiceVLANVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Voice VLAN ID. default: 1000, range : 1-4094. " ::= { gs2328pVoiceVLANConf 2 } gs2328pVoiceVLANAgingTime OBJECT-TYPE SYNTAX Integer32(10..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Voice VLAN secure learning aging time. default: 86400, range : 10 - 10000000. " ::= { gs2328pVoiceVLANConf 3 } gs2328pVoiceVLANTrafficClass OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION " Voice VLAN traffic class, all traffic on the Voice VLAN will apply this class, available value is from 0(Low) to 7(High). default: 7. " ::= { gs2328pVoiceVLANConf 4 } gs2328pVoiceVLANPortTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PVoiceVLANPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show Voice Vlan configuration. " ::= { gs2328pVoiceVLANConf 5 } gs2328pVoiceVLANPortEntry OBJECT-TYPE SYNTAX GS2328PVoiceVLANPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pVoiceVLANPort } ::= { gs2328pVoiceVLANPortTable 1 } GS2328PVoiceVLANPortEntry ::= SEQUENCE { gs2328pVoiceVLANPort Integer32, gs2328pVoiceVLANPortMode INTEGER, gs2328pVoiceVLANPortSecurity INTEGER, gs2328pVoiceVLANPortDiscoveryProtocol INTEGER } gs2328pVoiceVLANPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pVoiceVLANPortEntry 1 } gs2328pVoiceVLANPortMode OBJECT-TYPE SYNTAX INTEGER { disable(0), auto(1), forced(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Voice VLAN port mode. default: 0, 0: Disable (Disjoin from Voice VLAN.) 1: Auto (Enable auto detect mode. It detects whether there is VoIP phone attached to the specific port and configures the Voice VLAN members automatically.) 2: Forced (Force join to Voice VLAN.)" ::= { gs2328pVoiceVLANPortEntry 2 } gs2328pVoiceVLANPortSecurity OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Voice VLAN port security mode. default: 0, 0: Disable (Disjoin from Voice VLAN.) 1: enable ( Enable Voice VLAN security mode. When the function is enabled, all non-telephone MAC address in Voice VLAN will be blocked 10 seconds.)" ::= { gs2328pVoiceVLANPortEntry 3 } gs2328pVoiceVLANPortDiscoveryProtocol OBJECT-TYPE SYNTAX INTEGER { oui(0), lldp(1), both(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Voice VLAN port discovery protocol. default: 0 0: OUI (Detect telephony device by OUI address.) 1: LLDP (Detect telephony device by LLDP.) 2: Both (Both OUI and LLDP.) " ::= { gs2328pVoiceVLANPortEntry 4 } gs2328pVoiceVLANOUI OBJECT IDENTIFIER ::= { gs2328pVoiceVLAN 2 } gs2328pVoiceVLANOUICreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create an OUI entry" ::= { gs2328pVoiceVLANOUI 1 } gs2328pVoiceVLANOUITable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PVoiceVLANOUIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Create Voice VLAN OUI entry. Modify OUI table will restart auto detect OUI process. " ::= { gs2328pVoiceVLANOUI 2 } gs2328pVoiceVLANOUIEntry OBJECT-TYPE SYNTAX GS2328PVoiceVLANOUIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pVoiceVLANOUIIndex } ::= { gs2328pVoiceVLANOUITable 1 } GS2328PVoiceVLANOUIEntry ::= SEQUENCE { gs2328pVoiceVLANOUIIndex Integer32, gs2328pVoiceVLANTelephonyOUI OCTET STRING, gs2328pVoiceVLANDescription DisplayString, gs2328pVoiceVLANOUIRowStatus INTEGER } gs2328pVoiceVLANOUIIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pVoiceVLANOUIEntry 1 } gs2328pVoiceVLANTelephonyOUI OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "OUI address, format : 0a 1b 2c " ::= { gs2328pVoiceVLANOUIEntry 2 } gs2328pVoiceVLANDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 32 characters describing OUI address. " ::= { gs2328pVoiceVLANOUIEntry 3 } gs2328pVoiceVLANOUIRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy 5: undo" ::= { gs2328pVoiceVLANOUIEntry 4 } gs2328pGARP OBJECT IDENTIFIER ::= { gs2328pConfiguration 3 } gs2328pGARPConfTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PGARPConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pGARP 1 } gs2328pGARPConfEntry OBJECT-TYPE SYNTAX GS2328PGARPConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pGARPConfPort } ::= { gs2328pGARPConfTable 1 } GS2328PGARPConfEntry ::= SEQUENCE { gs2328pGARPConfPort Integer32, gs2328pGARPJoinTimer Integer32, gs2328pGARPLeaveTimer Integer32, gs2328pGARPLeaveAllTimer Integer32, gs2328pGARPApplicantion INTEGER, gs2328pGARPAttributeType INTEGER, gs2328pGARPApplicant INTEGER } gs2328pGARPConfPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pGARPConfEntry 1 } gs2328pGARPJoinTimer OBJECT-TYPE SYNTAX Integer32(200..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 200, range : 200 - 1000 " ::= { gs2328pGARPConfEntry 2 } gs2328pGARPLeaveTimer OBJECT-TYPE SYNTAX Integer32(600..3000) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 600 , range : 600 - 3000" ::= { gs2328pGARPConfEntry 3 } gs2328pGARPLeaveAllTimer OBJECT-TYPE SYNTAX Integer32(10000..50000) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 10000, range : 10000 - 50000 " ::= { gs2328pGARPConfEntry 4 } gs2328pGARPApplicantion OBJECT-TYPE SYNTAX INTEGER { gvrp(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 1: GVRP" ::= { gs2328pGARPConfEntry 5 } gs2328pGARPAttributeType OBJECT-TYPE SYNTAX INTEGER { vlan(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 1: VLAN" ::= { gs2328pGARPConfEntry 6 } gs2328pGARPApplicant OBJECT-TYPE SYNTAX INTEGER { participant(0), nonParticipant(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: normal-participant 1: non-participant" ::= { gs2328pGARPConfEntry 7 } gs2328pGARPStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PGARPStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show the basic GARP port statistics. " ::= { gs2328pGARP 2 } gs2328pGARPStatisticsEntry OBJECT-TYPE SYNTAX GS2328PGARPStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pGARPStatisticsPort } ::= { gs2328pGARPStatisticsTable 1 } GS2328PGARPStatisticsEntry ::= SEQUENCE { gs2328pGARPStatisticsPort Integer32, gs2328pGARPStatisticsPeerMAC DisplayString, gs2328pGARPStatisticsFailedCount Counter32 } gs2328pGARPStatisticsPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pGARPStatisticsEntry 1 } gs2328pGARPStatisticsPeerMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Peer MAC is MAC address of the neighbour Switch from with GARP frame is received. " ::= { gs2328pGARPStatisticsEntry 2 } gs2328pGARPStatisticsFailedCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " explain Failed count here. " ::= { gs2328pGARPStatisticsEntry 3 } gs2328pGVRP OBJECT IDENTIFIER ::= { gs2328pConfiguration 4 } gs2328pGVRPConf OBJECT IDENTIFIER ::= { gs2328pGVRP 1 } gs2328pGVRPMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0: disable, 1: enable. " ::= { gs2328pGVRPConf 1 } gs2328pGVRPConfTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PGVRPConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pGVRPConf 2 } gs2328pGVRPConfEntry OBJECT-TYPE SYNTAX GS2328PGVRPConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pGVRPConfPort } ::= { gs2328pGVRPConfTable 1 } GS2328PGVRPConfEntry ::= SEQUENCE { gs2328pGVRPConfPort Integer32, gs2328pGVRPConfPortMode INTEGER, gs2328pGVRPConfPortRRole INTEGER } gs2328pGVRPConfPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pGVRPConfEntry 1 } gs2328pGVRPConfPortMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 1: enable 0: disable" ::= { gs2328pGVRPConfEntry 2 } gs2328pGVRPConfPortRRole OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 1: enable 0: disable" ::= { gs2328pGVRPConfEntry 3 } gs2328pGVRPStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PGVRPStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pGVRP 2 } gs2328pGVRPStatisticsEntry OBJECT-TYPE SYNTAX GS2328PGVRPStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pGVRPStatisticsPort } ::= { gs2328pGVRPStatisticsTable 1 } GS2328PGVRPStatisticsEntry ::= SEQUENCE { gs2328pGVRPStatisticsPort Integer32, gs2328pGVRPStatisticsJoinTxCnt Counter32, gs2328pGVRPStatisticsLeaveTxCnt Counter32 } gs2328pGVRPStatisticsPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pGVRPStatisticsEntry 1 } gs2328pGVRPStatisticsJoinTxCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pGVRPStatisticsEntry 2 } gs2328pGVRPStatisticsLeaveTxCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pGVRPStatisticsEntry 3 } gs2328pMirroring OBJECT IDENTIFIER ::= { gs2328pConfiguration 6 } gs2328pPortToMirrorOn OBJECT-TYPE SYNTAX Integer32(0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable, range : 1 - port number. " ::= { gs2328pMirroring 1 } gs2328pMirrorTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PMirrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pMirroring 2 } gs2328pMirrorEntry OBJECT-TYPE SYNTAX GS2328PMirrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pMirrorPort } ::= { gs2328pMirrorTable 1 } GS2328PMirrorEntry ::= SEQUENCE { gs2328pMirrorPort Integer32, gs2328pMirrorMode INTEGER } gs2328pMirrorPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pMirrorEntry 1 } gs2328pMirrorMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), rxOnly(2), txOnly(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable 2: rx only 3: tx only Setting Tx mirroring for analyzer port has no effect. Tx mirroring ignored" ::= { gs2328pMirrorEntry 2 } gs2328pTrapEventSeverity OBJECT IDENTIFIER ::= { gs2328pConfiguration 7 } gs2328pTrapEventSeverityACL OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 1 } gs2328pTrapEventSeverityACLLog OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 7(Debug) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 2 } gs2328pTrapEventSeverityAccessMgmt OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 3 } gs2328pTrapEventSeverityAuthFailed OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 4 } gs2328pTrapEventSeverityColdStart OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 5 } gs2328pTrapEventSeverityConfigInfo OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 6 } gs2328pTrapEventSeverityFirmwareUpgrade OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 7 } gs2328pTrapEventSeverityImportExport OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 8 } gs2328pTrapEventSeverityLACP OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 9 } gs2328pTrapEventSeverityLinkStatus OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 10 } gs2328pTrapEventSeverityLogin OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 11 } gs2328pTrapEventSeverityLogout OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 12 } gs2328pTrapEventSeverityLoopProtect OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 13 } gs2328pTrapEventSeverityMgmtIPChange OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 14 } gs2328pTrapEventSeverityModuleChange OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 5(Notice) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 15 } gs2328pTrapEventSeverityNAS OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 16 } gs2328pTrapEventSeverityPasswordChange OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 17 } gs2328pTrapEventSeverityPortSecurity OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 18 } gs2328pTrapEventSeverityVLAN OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 6(Info) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 20 } gs2328pTrapEventSeverityWarmStart OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 21 } gs2328pTrapEventSeverityPoEAutoCheck OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 22 } gs2328pTrapEventSeverityARPConflict OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 25 } gs2328pTrapEventSeveritySpoofingLimit OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 27 } gs2328pTrapEventSeverityStaticARPConflict OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 4(Warning) 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pTrapEventSeverity 28 } gs2328pSMTP OBJECT IDENTIFIER ::= { gs2328pConfiguration 8 } gs2328pSMTPMailServer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing email server. " ::= { gs2328pSMTP 1 } gs2328pSMTPUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing user name. " ::= { gs2328pSMTP 2 } gs2328pSMTPPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing password. " ::= { gs2328pSMTP 3 } gs2328pSMTPServeriryLevel OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), info(6), debug(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 6 0: Emergency 1: Alert 2: Critical 3: Error 4: Warning 5: Notice 6: Info 7: Debug" ::= { gs2328pSMTP 4 } gs2328pSMTPSender OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing sender. " ::= { gs2328pSMTP 5 } gs2328pSMTPReturnPath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing return path. " ::= { gs2328pSMTP 6 } gs2328pSMTPEmailAddress1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing mail address. " ::= { gs2328pSMTP 7 } gs2328pSMTPEmailAddress2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing mail address. " ::= { gs2328pSMTP 8 } gs2328pSMTPEmailAddress3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing mail address. " ::= { gs2328pSMTP 9 } gs2328pSMTPEmailAddress4 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing mail address. " ::= { gs2328pSMTP 10 } gs2328pSMTPEmailAddress5 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing mail address. " ::= { gs2328pSMTP 11 } gs2328pSMTPEmailAddress6 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing mail address. " ::= { gs2328pSMTP 12 } gs2328pACL OBJECT IDENTIFIER ::= { gs2328pConfiguration 9 } gs2328pACLPortsConfTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PACLPortsConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pACL 1 } gs2328pACLPortsConfEntry OBJECT-TYPE SYNTAX GS2328PACLPortsConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pACLPortsConfPort } ::= { gs2328pACLPortsConfTable 1 } GS2328PACLPortsConfEntry ::= SEQUENCE { gs2328pACLPortsConfPort Integer32, gs2328pACLPortsConfPolicyID Integer32, gs2328pACLPortsConfAction INTEGER, gs2328pACLPortsConfRateLimiterID Integer32, gs2328pACLPortsConfPortRedirect Integer32, gs2328pACLPortsConfMirror INTEGER, gs2328pACLPortsConfLogging INTEGER, gs2328pACLPortsConfShutdown INTEGER, gs2328pACLPortsConfState INTEGER, gs2328pACLPortsConfCounter Counter32 } gs2328pACLPortsConfPort OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pACLPortsConfEntry 1 } gs2328pACLPortsConfPolicyID OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, range : 0 - 255 " ::= { gs2328pACLPortsConfEntry 2 } gs2328pACLPortsConfAction OBJECT-TYPE SYNTAX INTEGER { deny(0), permit(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1, 0: Deny 1: Permit" ::= { gs2328pACLPortsConfEntry 3 } gs2328pACLPortsConfRateLimiterID OBJECT-TYPE SYNTAX Integer32 (0..12) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0: Disable range : 0 - 12 " ::= { gs2328pACLPortsConfEntry 4 } gs2328pACLPortsConfPortRedirect OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: Disable range : 0 - end port number " ::= { gs2328pACLPortsConfEntry 5 } gs2328pACLPortsConfMirror OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: Disable 1: Enable " ::= { gs2328pACLPortsConfEntry 6 } gs2328pACLPortsConfLogging OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: Disable 1: Enable " ::= { gs2328pACLPortsConfEntry 7 } gs2328pACLPortsConfShutdown OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: Disable 1: Enable " ::= { gs2328pACLPortsConfEntry 8 } gs2328pACLPortsConfState OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: Disable 1: Enable " ::= { gs2328pACLPortsConfEntry 9 } gs2328pACLPortsConfCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of frames that match this ACE. " ::= { gs2328pACLPortsConfEntry 10 } gs2328pACLRateLimiterTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PACLRateLimiterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pACL 2 } gs2328pACLRateLimiterEntry OBJECT-TYPE SYNTAX GS2328PACLRateLimiterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pACLRateLimiterID } ::= { gs2328pACLRateLimiterTable 1 } GS2328PACLRateLimiterEntry ::= SEQUENCE { gs2328pACLRateLimiterID Integer32, gs2328pACLRateLimiterUnit INTEGER, gs2328pACLRateLimiterRate Integer32 } gs2328pACLRateLimiterID OBJECT-TYPE SYNTAX Integer32 (1..12) MAX-ACCESS not-accessible STATUS current DESCRIPTION " Rate Limiter ID. range : 1-12 " ::= { gs2328pACLRateLimiterEntry 1 } gs2328pACLRateLimiterUnit OBJECT-TYPE SYNTAX INTEGER { pps(0), kbps(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0: pps 1: kbps" ::= { gs2328pACLRateLimiterEntry 2 } gs2328pACLRateLimiterRate OBJECT-TYPE SYNTAX Integer32(0..3276700) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1, range : <0-3276700> pps <0-10000> kbps" ::= { gs2328pACLRateLimiterEntry 3 } gs2328pACLACE OBJECT IDENTIFIER ::= { gs2328pACL 3 } gs2328pACLACECreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create an ACE entry" ::= { gs2328pACLACE 1 } gs2328pACLACETable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PACLACEEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Create ACL ACE entry. " ::= { gs2328pACLACE 2 } gs2328pACLACEEntry OBJECT-TYPE SYNTAX GS2328PACLACEEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pACLACEIndex } ::= { gs2328pACLACETable 1 } GS2328PACLACEEntry ::= SEQUENCE { gs2328pACLACEIndex Integer32, gs2328pACLACEID Integer32, gs2328pACLACENextID Integer32, gs2328pACLACEIngressPort DisplayString, gs2328pACLACEPortPolicyNumber Integer32, gs2328pACLACEPortPolicyBitmask Integer32, gs2328pACLACEFrameType INTEGER, gs2328pACLACEAction INTEGER, gs2328pACLACEDenyPortRedirect DisplayString, gs2328pACLACELogging INTEGER, gs2328pACLACEMirror INTEGER, gs2328pACLACERateLimiter Integer32, gs2328pACLACEShutdown INTEGER, gs2328pACLACEVLAN8021QTagged INTEGER, gs2328pACLACEVLANTagPriority Integer32, gs2328pACLACEVLANVID Integer32, gs2328pACLACEEtherType Integer32, gs2328pACLACESMAC DisplayString, gs2328pACLACEDMACType INTEGER, gs2328pACLACEDMAC DisplayString, gs2328pACLACEArpOpcode INTEGER, gs2328pACLACEArpFlagsRequestReply INTEGER, gs2328pACLACEArpFlagsArpSmac INTEGER, gs2328pACLACEArpFlagsRarpDmac INTEGER, gs2328pACLACEArpFlagsLength INTEGER, gs2328pACLACEArpFlagsIp INTEGER, gs2328pACLACEArpFlagsEthernet INTEGER, gs2328pACLACESIPType INTEGER, gs2328pACLACESIPIPAddress IpAddress, gs2328pACLACESIPNetworkPrefix Integer32, gs2328pACLACEDIPType INTEGER, gs2328pACLACEDIPIPAddress IpAddress, gs2328pACLACEDIPNetworkPrefix Integer32, gs2328pACLACEIPProtocol Integer32, gs2328pACLACEIPFlagsTTL INTEGER, gs2328pACLACEIPFlagsOptions INTEGER, gs2328pACLACEIPFlagsFragment INTEGER, gs2328pACLACEICMPType Integer32, gs2328pACLACEICMPCode Integer32, gs2328pACLACESourcePortMin Integer32, gs2328pACLACESourcePortMax Integer32, gs2328pACLACEDestPortMin Integer32, gs2328pACLACEDestPortMax Integer32, gs2328pACLACETCPFlagsFin INTEGER, gs2328pACLACETCPFlagsSyn INTEGER, gs2328pACLACETCPFlagsRst INTEGER, gs2328pACLACETCPFlagsPsh INTEGER, gs2328pACLACETCPFlagsAck INTEGER, gs2328pACLACETCPFlagsUrg INTEGER, gs2328pACLACERowStatus INTEGER } gs2328pACLACEIndex OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pACLACEEntry 1 } gs2328pACLACEID OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS read-write STATUS current DESCRIPTION " If the ACE ID is specified and an entry with this ACE ID already exists, the ACE will be modified. Otherwise, a new ACE will be added. range : 1 - 256. " ::= { gs2328pACLACEEntry 2 } gs2328pACLACENextID OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-write STATUS current DESCRIPTION " If the next ACE ID is non zero, the ACE will be placed before this ACE in the list. If the next ACE ID is zero, the ACE will be placed last in the list. range : 0 - 256. " ::= { gs2328pACLACEEntry 3 } gs2328pACLACEIngressPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the ingress port of the ACE. Possible values are: All: The ACE will match all ingress port. Port: The ACE will match a specific ingress port.Format: 1,3,6." ::= { gs2328pACLACEEntry 4 } gs2328pACLACEPortPolicyNumber OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " policy value. range : 0 - 255. " ::= { gs2328pACLACEEntry 5 } gs2328pACLACEPortPolicyBitmask OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " policy bitmask. range : 0 - 255(0xff). " ::= { gs2328pACLACEEntry 6 } gs2328pACLACEFrameType OBJECT-TYPE SYNTAX INTEGER { any(0), arp(1), etype(2), icmp(3), ipv4(4), tcp(5), udp(6) } MAX-ACCESS read-write STATUS current DESCRIPTION " 0: any, 1: arp, 2: etype, 3: icmp, 4: ipv4, 5: tcp, 6: udp." ::= { gs2328pACLACEEntry 7 } gs2328pACLACEAction OBJECT-TYPE SYNTAX INTEGER { deny(0), permit(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1, 0: Deny 1: Permit" ::= { gs2328pACLACEEntry 8 } gs2328pACLACEDenyPortRedirect OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Frames that hit the ACE are redirected to the port number specified here. Disabled: indicates that the port redirect operation is disabled. Port Format: 1,3,6." ::= { gs2328pACLACEEntry 9 } gs2328pACLACELogging OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0: disable - Frames matching the ACE are not logged. 1: enable - Frames matching the ACE are stored in the system log." ::= { gs2328pACLACEEntry 10 } gs2328pACLACEMirror OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0: disable - Frames matching the ACE are not mirrored. 1: enable - Frames matching the ACE are mirrored." ::= { gs2328pACLACEEntry 11 } gs2328pACLACERateLimiter OBJECT-TYPE SYNTAX Integer32(0..12) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0: Disable range : 0 - 12 " ::= { gs2328pACLACEEntry 12 } gs2328pACLACEShutdown OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0: disable - Port shut down is disabled for the AC. 1: enable - If a frame matches the ACE, the ingress port will be disabled." ::= { gs2328pACLACEEntry 13 } gs2328pACLACEVLAN8021QTagged OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), any(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify whether frames can hit the action according to the 802.1Q tagged. default: 2, 0: disable - Untagged frame only. 1: enable - Tagged frame only. 2: Any - Any value is allowed. " ::= { gs2328pACLACEEntry 14 } gs2328pACLACEVLANTagPriority OBJECT-TYPE SYNTAX Integer32(0..8) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the tag priority for this ACE. The tag priority can't be set when 802.1Q Tagged is disabled default: 8, 8: Any, range : 0 - 8 " ::= { gs2328pACLACEEntry 15 } gs2328pACLACEVLANVID OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the VLAN ID filter for this ACE. The vid can't be set when 802.1Q Tagged is disabled. default: 0, 0: Any - No VLAN ID filter is specified. range : 0 - 4094 " ::= { gs2328pACLACEEntry 16 } gs2328pACLACEEtherType OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION " 0: Any - Any but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6). range : 0 or 1536(0x0600)- 65535(0xffff). " ::= { gs2328pACLACEEntry 17 } gs2328pACLACESMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Configure source MAC address for this ACE. : A frame that hits this ACE matches this source MAC address value. Any: Don't care." ::= { gs2328pACLACEEntry 18 } gs2328pACLACEDMACType OBJECT-TYPE SYNTAX INTEGER { any(0), broadcast(1), unicast(2), multicast(3) , macAddress(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "DMAC Type. default: 0, 0: Any - Don't care. 1: Broadcast - Frame must be broadcast. 2: Unicast - Frame must be unicast. 3: Multicast - Frame must be multicast. 4: mac address. range : 0 - 4 " ::= { gs2328pACLACEEntry 19 } gs2328pACLACEDMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Configure destination MAC address for this ACE. : A frame that hits this ACE matches this destination MAC address value. Any: Don't care. Broadcast: Frame must be broadcast. Unicast: Frame must be unicast. Multicast: Frame must be multicast. " ::= { gs2328pACLACEEntry 20 } gs2328pACLACEArpOpcode OBJECT-TYPE SYNTAX INTEGER { any(0), arp(1), rarp(2), other(3), noData(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure ARP opcode for this ACE. default: 0, 0: Any - Don't care. 1: arp. 2: rarp. 3: other. 4: No data. range : 0 - 4 " ::= { gs2328pACLACEEntry 21 } gs2328pACLACEArpFlagsRequestReply OBJECT-TYPE SYNTAX INTEGER { reply(0), request(1), any(2), noData(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the available ARP/RARP opcode (OP) flag for this ACE. default: 2, 0: Frame must have ARP Reply or RARP Reply OP flag. 1: Frame must have ARP Request or RARP Request OP flag set. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2328pACLACEEntry 22 } gs2328pACLACEArpFlagsArpSmac OBJECT-TYPE SYNTAX INTEGER { notEqualSMAC(0), equalSMAC(1), any(2), noData(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Specify whether frames can hit the action according to their sender hardware address field (SHA) settings. default: 2, 0: ARP frames where SHA is not equal to the SMAC address. 1: ARP frames where SHA is equal to the SMAC address. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2328pACLACEEntry 23 } gs2328pACLACEArpFlagsRarpDmac OBJECT-TYPE SYNTAX INTEGER { notEqualDMAC(0), equalDMAC(1), any(2), noData(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "Specify whether frames can hit the action according to their target hardware address field (THA) settings. default: 2, 0: RARP frames where THA is not equal to the DMAC address. 1: RARP frames where THA is equal to the DMAC address. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2328pACLACEEntry 24 } gs2328pACLACEArpFlagsLength OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and protocol address length (PLN) settings. default: 2, 0: ARP/RARP frames where the HLN is not equal to Ethernet(0x06) or the (PLN) is not equal to IPv4(0x04). 1: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is equal to IPv4(0x04). 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2328pACLACEEntry 25 } gs2328pACLACEArpFlagsIp OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings. default: 2, 0: ARP/RARP frames where the HLD is not equal to Ethernet(1). 1: ARP/RARP frames where the HLD is equal to Ethernet(1). 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2328pACLACEEntry 26 } gs2328pACLACEArpFlagsEthernet OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings. default: 2, 0: ARP/RARP frames where the PRO is not equal to IP\n(0x800). 1: ARP/RARP frames where the PRO is equal to IP(0x800). 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2328pACLACEEntry 27 } gs2328pACLACESIPType OBJECT-TYPE SYNTAX INTEGER { any(0), ip(1), noData(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure source IP address for this ACE. default: 0, 0: Any - Don't care. 1: IP Address. 2: No data. range : 0 - 1" ::= { gs2328pACLACEEntry 28 } gs2328pACLACESIPIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "A frame that hits this ACE matches this source IP address value." ::= { gs2328pACLACEEntry 29 } gs2328pACLACESIPNetworkPrefix OBJECT-TYPE SYNTAX Integer32(0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "Network prefix. default: 32, 0: No data. range : 1 - 32" ::= { gs2328pACLACEEntry 30 } gs2328pACLACEDIPType OBJECT-TYPE SYNTAX INTEGER { any(0), ip(1),noData(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure destination IP address for this ACE. default: 0, 0: Any - Don't care. 1: IP Address. 2: No data. range : 0 - 1" ::= { gs2328pACLACEEntry 32 } gs2328pACLACEDIPIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "A frame that hits this ACE matches this destination IP address value." ::= { gs2328pACLACEEntry 33 } gs2328pACLACEDIPNetworkPrefix OBJECT-TYPE SYNTAX Integer32(0..32) MAX-ACCESS read-write STATUS current DESCRIPTION "Network prefix. default: 32, 0: No data. range : 1 - 32" ::= { gs2328pACLACEEntry 34 } gs2328pACLACEIPProtocol OBJECT-TYPE SYNTAX Integer32(0..257) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure IP protocol for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 256" ::= { gs2328pACLACEEntry 36 } gs2328pACLACEIPFlagsTTL OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure IP Time-to-Live flags for this ACE. default: 2, 0: IPv4 frames with a Time-to-Live field is equal to zero. 1: IPv4 frames with a Time-to-Live field greater than zero. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2328pACLACEEntry 37 } gs2328pACLACEIPFlagsOptions OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure IP options flag for this ACE. default: 2, 0: IPv4 frames where the options flag is unset. 1: IPv4 frames where the options flag is set. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2328pACLACEEntry 38 } gs2328pACLACEIPFlagsFragment OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure IP fragment offset flags for this ACE. default: 2, 0: IPv4 frames where the MF bit is unset and the FRAG OFFSET field is equal zero. 1: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2328pACLACEEntry 39 } gs2328pACLACEICMPType OBJECT-TYPE SYNTAX Integer32(0..257) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure ICMP type for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 256" ::= { gs2328pACLACEEntry 40 } gs2328pACLACEICMPCode OBJECT-TYPE SYNTAX Integer32(0..257) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure ICMP code for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 257" ::= { gs2328pACLACEEntry 41 } gs2328pACLACESourcePortMin OBJECT-TYPE SYNTAX Integer32(0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure Source UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65536" ::= { gs2328pACLACEEntry 42 } gs2328pACLACESourcePortMax OBJECT-TYPE SYNTAX Integer32(0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure Source UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65536" ::= { gs2328pACLACEEntry 43 } gs2328pACLACEDestPortMin OBJECT-TYPE SYNTAX Integer32(0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure Destination UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65535" ::= { gs2328pACLACEEntry 44 } gs2328pACLACEDestPortMax OBJECT-TYPE SYNTAX Integer32(0..65536) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure Destination UDP/TCP port range for this ACE. default: 0, 65536: No data. range : 0 - 65535" ::= { gs2328pACLACEEntry 45 } gs2328pACLACETCPFlagsFin OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure TCP (FIN) flags for this ACE. default: 2, 0: TCP frames where the FIN field is unset. 1: TCP frames where the FIN field is set. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2328pACLACEEntry 46 } gs2328pACLACETCPFlagsSyn OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure TCP (SYN) flags for this ACE. default: 2, 0: TCP frames where the SYN field is unset. 1: TCP frames where the SYN field is set. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2328pACLACEEntry 47 } gs2328pACLACETCPFlagsRst OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure TCP (RST) flags for this ACE. default: 2, 0: TCP frames where the RST field is unset. 1: TCP frames where the RST field is set. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2328pACLACEEntry 48 } gs2328pACLACETCPFlagsPsh OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure TCP (PSH) flags for this ACE. default: 2, 0: TCP frames where the PSH field is unset. 1: TCP frames where the PSH field is set. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2328pACLACEEntry 49 } gs2328pACLACETCPFlagsAck OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure TCP (ACK) flags for this ACE. default: 2, 0: TCP frames where the ACK field is unset. 1: TCP frames where the ACK field is set. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2328pACLACEEntry 50 } gs2328pACLACETCPFlagsUrg OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure TCP (URG) flags for this ACE. default: 2, 0: TCP frames where the URG field is unset. 1: TCP frames where the URG field is set. 2: Any - Don't care. 3: No data. range : 0 - 3 " ::= { gs2328pACLACEEntry 51 } gs2328pACLACERowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION " 1: active 2: notInservice 4: destroy 5: undo" ::= { gs2328pACLACEEntry 66 } gs2328pACLACEClear OBJECT-TYPE SYNTAX INTEGER { noAction(0), clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : No action 1 : Clear all ACL counters." ::= { gs2328pACLACE 3 } gs2328pACLACEMoveACEID OBJECT-TYPE SYNTAX Integer32(0..256) MAX-ACCESS read-write STATUS current DESCRIPTION "Move ACE, default: 0 ACE ID must be exist. range : 1 - 256." ::= { gs2328pACLACE 4 } gs2328pACLACEMoveNextACEID OBJECT-TYPE SYNTAX Integer32(0..256) MAX-ACCESS read-write STATUS current DESCRIPTION "Move ACE, default: 0 If the next ACE ID is non zero, the ACE will be placed before this ACE in the list. If the next ACE ID is zero, the ACE will be placed last in the list. range : 0 - 256." ::= { gs2328pACLACE 5 } gs2328pACLACEStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PACLACEStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " ACL ACE Status entry. " ::= { gs2328pACLACE 6 } gs2328pACLACEStatusEntry OBJECT-TYPE SYNTAX GS2328PACLACEStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pACLACEStatusIndex } ::= { gs2328pACLACEStatusTable 1 } GS2328PACLACEStatusEntry ::= SEQUENCE { gs2328pACLACEStatusIndex Integer32, gs2328pACLACEStatusUser DisplayString, gs2328pACLACEStatusID Integer32, gs2328pACLACEStatusIngressPort DisplayString, gs2328pACLACEStatusFrameType DisplayString, gs2328pACLACEStatusAction DisplayString, gs2328pACLACEStatusRateLimiter DisplayString, gs2328pACLACEStatusPortCopy DisplayString, gs2328pACLACEStatusMirror DisplayString, gs2328pACLACEStatusCPU DisplayString, gs2328pACLACEStatusCounter Counter32, gs2328pACLACEStatusConflict DisplayString } gs2328pACLACEStatusIndex OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pACLACEStatusEntry 1 } gs2328pACLACEStatusUser OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the ACL user. S : Static. IPMG : IP Management. IPSG : IP Source Guard. IPMC : IPMC. ARPI : Arp Inspection. UPnP : UPnP. DHCP : DHCP. " ::= { gs2328pACLACEStatusEntry 2 } gs2328pACLACEStatusID OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS read-only STATUS current DESCRIPTION " ACE ID. range : 1 - 256. " ::= { gs2328pACLACEStatusEntry 3 } gs2328pACLACEStatusIngressPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the ingress port of the ACE. Possible values are: All: The ACE will match all ingress port. Port: The ACE will match a specific ingress port. " ::= { gs2328pACLACEStatusEntry 4 } gs2328pACLACEStatusFrameType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the frame type of the ACE. " ::= { gs2328pACLACEStatusEntry 5 } gs2328pACLACEStatusAction OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the forwarding action of the ACE. " ::= { gs2328pACLACEStatusEntry 6 } gs2328pACLACEStatusRateLimiter OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the rate limiter number of the ACE. " ::= { gs2328pACLACEStatusEntry 7 } gs2328pACLACEStatusPortCopy OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the port redirect operation of the ACE. Frames matching the ACE are redirected to the port number. " ::= { gs2328pACLACEStatusEntry 8 } gs2328pACLACEStatusMirror OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Specify the mirror operation of this port. " ::= { gs2328pACLACEStatusEntry 9 } gs2328pACLACEStatusCPU OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Forward packet that matched the specific ACE to CPU. " ::= { gs2328pACLACEStatusEntry 10 } gs2328pACLACEStatusCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The counter indicates the number of times the ACE was hit by a frame. " ::= { gs2328pACLACEStatusEntry 11 } gs2328pACLACEStatusConflict OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the hardware status of the specific ACE. The specific ACE is not applied to the hardware due to hardware limitations. " ::= { gs2328pACLACEStatusEntry 12 } gs2328pLoopProtection OBJECT IDENTIFIER ::= { gs2328pConfiguration 12 } gs2328pLoopProtectionConfig OBJECT IDENTIFIER ::= { gs2328pLoopProtection 1 } gs2328pLoopProtectionGlobalEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure loop protection mode. 0: disable, 1: enable, default: disable. " ::= { gs2328pLoopProtectionConfig 1 } gs2328pLoopProtectionTranmisstionTime OBJECT-TYPE SYNTAX Integer32(1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure loop protection transmit interval. default: 5, range: 1-10. " ::= { gs2328pLoopProtectionConfig 2 } gs2328pLoopProtectionShutdownTime OBJECT-TYPE SYNTAX Integer32(0..604800) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure loop protection shutdown time. default: 180, range: 0-604800. " ::= { gs2328pLoopProtectionConfig 3 } gs2328pLoopProtectionConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PLoopProtectionConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show Loop Protection configurations. " ::= { gs2328pLoopProtectionConfig 4 } gs2328pLoopProtectionConfigurationEntry OBJECT-TYPE SYNTAX GS2328PLoopProtectionConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pLoopProtectionConfPort } ::= { gs2328pLoopProtectionConfigurationTable 1 } GS2328PLoopProtectionConfigurationEntry ::= SEQUENCE { gs2328pLoopProtectionConfPort Integer32, gs2328pLoopProtectionConfEnable INTEGER, gs2328pLoopProtectionConfAction INTEGER, gs2328pLoopProtectionConfTxmode INTEGER } gs2328pLoopProtectionConfPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pLoopProtectionConfigurationEntry 1 } gs2328pLoopProtectionConfEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure loop protection port mode. 0: disable, 1: enable, default: enable. " ::= { gs2328pLoopProtectionConfigurationEntry 2 } gs2328pLoopProtectionConfAction OBJECT-TYPE SYNTAX INTEGER { shutdown(0), shutdownLog(1), log(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Configure loop protection port action. 0: Shutdown port, 1: Shutdown port and Log, 2: Log Only, default: Shutdown port. " ::= { gs2328pLoopProtectionConfigurationEntry 3 } gs2328pLoopProtectionConfTxmode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure loop protection port transmit mode. 0: disable, 1: enable, default: enable. " ::= { gs2328pLoopProtectionConfigurationEntry 4 } gs2328pLoopProtectionStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PLoopProtectionStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show Loop Protection Status. " ::= { gs2328pLoopProtection 2 } gs2328pLoopProtectionStatusEntry OBJECT-TYPE SYNTAX GS2328PLoopProtectionStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pLoopProtectionStatusPort } ::= { gs2328pLoopProtectionStatusTable 1 } GS2328PLoopProtectionStatusEntry ::= SEQUENCE { gs2328pLoopProtectionStatusPort Integer32, gs2328pLoopProtectionStatusAction DisplayString, gs2328pLoopProtectionStatusTransmit DisplayString, gs2328pLoopProtectionStatusLoops Integer32, gs2328pLoopProtectionStatusStatus DisplayString, gs2328pLoopProtectionStatusLoop DisplayString, gs2328pLoopProtectionStatusTimeLastLoop DisplayString } gs2328pLoopProtectionStatusPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pLoopProtectionStatusEntry 1 } gs2328pLoopProtectionStatusAction OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The currently configured port action. " ::= { gs2328pLoopProtectionStatusEntry 2 } gs2328pLoopProtectionStatusTransmit OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The currently configured port transmit mode. " ::= { gs2328pLoopProtectionStatusEntry 3 } gs2328pLoopProtectionStatusLoops OBJECT-TYPE SYNTAX Integer32(0..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION " The number of loops detected on this port. " ::= { gs2328pLoopProtectionStatusEntry 4 } gs2328pLoopProtectionStatusStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The current loop protection status of the port. " ::= { gs2328pLoopProtectionStatusEntry 5 } gs2328pLoopProtectionStatusLoop OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Whether a loop is currently detected on the port. " ::= { gs2328pLoopProtectionStatusEntry 6 } gs2328pLoopProtectionStatusTimeLastLoop OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The time of the last loop event detected. " ::= { gs2328pLoopProtectionStatusEntry 7 } gs2328pPoe OBJECT IDENTIFIER ::= { gs2328pConfiguration 13 } gs2328pPoeStatus OBJECT IDENTIFIER ::= { gs2328pPoe 1 } gs2328pPoeStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PPoeStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure PoE Scheduling Table. " ::= { gs2328pPoeStatus 1 } gs2328pPoeStatusEntry OBJECT-TYPE SYNTAX GS2328PPoeStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pPoeStatusLocalPort } ::= { gs2328pPoeStatusTable 1 } GS2328PPoeStatusEntry ::= SEQUENCE { gs2328pPoeStatusLocalPort Integer32, gs2328pPoeStatusPDclass INTEGER, gs2328pPoeStatusPowerRequested DisplayString, gs2328pPoeStatusPowerAllocated DisplayString, gs2328pPoeStatusPowerUsed DisplayString, gs2328pPoeStatusCurrentUsed DisplayString, gs2328pPoeStatusPriority DisplayString, gs2328pPoeStatusPortStatus DisplayString } gs2328pPoeStatusLocalPort OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pPoeStatusEntry 1} gs2328pPoeStatusPDclass OBJECT-TYPE SYNTAX INTEGER (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the QCL user. 0: Max. power 15.4 W, 1: Max. power 4.0 W, 2: Max. power 7.0 W, 3: Max. power 15.4 W, 4: Max. power 30.0 W. " ::= { gs2328pPoeStatusEntry 2 } gs2328pPoeStatusPowerRequested OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Power Requested shows the requested amount of power the PD wants to be reserved. " ::= { gs2328pPoeStatusEntry 3} gs2328pPoeStatusPowerAllocated OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Power Allocated shows the amount of power the switch has allocated for the PD. " ::= { gs2328pPoeStatusEntry 4} gs2328pPoeStatusPowerUsed OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Power Used shows how much power the PD currently is using. " ::= { gs2328pPoeStatusEntry 5} gs2328pPoeStatusCurrentUsed OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Power Used shows how much current the PD currently is using. " ::= { gs2328pPoeStatusEntry 6} gs2328pPoeStatusPriority OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Priority shows the port's priority configured by the user. " ::= { gs2328pPoeStatusEntry 7} gs2328pPoeStatusPortStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Port Status shows the port's status. " ::= { gs2328pPoeStatusEntry 8} gs2328pPoeStatusTotalPowerRequested OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Total Power Requested." ::= { gs2328pPoeStatus 2} gs2328pPoeStatusTotalPowerAllocated OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Total Power allocated." ::= { gs2328pPoeStatus 3} gs2328pPoeStatusTotalPowerUsed OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Total Power Used." ::= { gs2328pPoeStatus 4} gs2328pPoeStatusTotalCurrentUsed OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Total Current Used." ::= { gs2328pPoeStatus 5} gs2328pPoePowerDelay OBJECT IDENTIFIER ::= { gs2328pPoe 2 } gs2328pPoePowerDelayTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PPoePowerDelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure PoE Power Delay mode. " ::= { gs2328pPoePowerDelay 1 } gs2328pPoePowerDelayEntry OBJECT-TYPE SYNTAX GS2328PPoePowerDelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pPoePowerDelayPort } ::= { gs2328pPoePowerDelayTable 1 } GS2328PPoePowerDelayEntry ::= SEQUENCE { gs2328pPoePowerDelayPort Integer32, gs2328pPoePowerDelayMode INTEGER, gs2328pPoePowerDelayTime Integer32 } gs2328pPoePowerDelayPort OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pPoePowerDelayEntry 1 } gs2328pPoePowerDelayMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Turn on / off the power delay function, 0: disable, 1: enable, default: disable. " ::= { gs2328pPoePowerDelayEntry 2 } gs2328pPoePowerDelayTime OBJECT-TYPE SYNTAX Integer32(0..300) MAX-ACCESS read-write STATUS current DESCRIPTION "set Delay Time, default: 0, range: 0-300 sec. " ::= { gs2328pPoePowerDelayEntry 3 } gs2328pPoeAutoCheck OBJECT IDENTIFIER ::= { gs2328pPoe 3 } gs2328pPoeAutoCheckPingCheck OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "connection between PoE port and power device. 0: disable, 1: enable, default: disable. " ::= { gs2328pPoeAutoCheck 1 } gs2328pPoeAutoCheckTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PPoeAutoCheckEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure PoE Power Delay mode. " ::= { gs2328pPoeAutoCheck 2 } gs2328pPoeAutoCheckEntry OBJECT-TYPE SYNTAX GS2328PPoeAutoCheckEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pPoeAutoCheckPort } ::= { gs2328pPoeAutoCheckTable 1 } GS2328PPoeAutoCheckEntry ::= SEQUENCE { gs2328pPoeAutoCheckPort Integer32, gs2328pPoeAutoCheckPingIPAddress DisplayString, gs2328pPoeAutoCheckIntervalTime Integer32, gs2328pPoeAutoCheckRetryTime Integer32, gs2328pPoeAutoCheckFailureLog DisplayString, gs2328pPoeAutoCheckFailureAction INTEGER, gs2328pPoeAutoCheckRebootTime Integer32 } gs2328pPoeAutoCheckPort OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pPoeAutoCheckEntry 1 } gs2328pPoeAutoCheckPingIPAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address the system should ping. default: 0.0.0.0 . " ::= { gs2328pPoeAutoCheckEntry 2 } gs2328pPoeAutoCheckIntervalTime OBJECT-TYPE SYNTAX Integer32(10..120) MAX-ACCESS read-write STATUS current DESCRIPTION "Device will send checking message to PD each interval time. default: 30, range: 10-120 sec. " ::= { gs2328pPoeAutoCheckEntry 3 } gs2328pPoeAutoCheckRetryTime OBJECT-TYPE SYNTAX Integer32(1..5) MAX-ACCESS read-write STATUS current DESCRIPTION "It will retry to send detection again. default: 3, range: 1-5. " ::= { gs2328pPoeAutoCheckEntry 4 } gs2328pPoeAutoCheckFailureLog OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Failure loggings counter. " ::= { gs2328pPoeAutoCheckEntry 5 } gs2328pPoeAutoCheckFailureAction OBJECT-TYPE SYNTAX INTEGER { nothing(0), reboot(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "It will retry to send detection again, 0: Nothing, 1: Reboot Remote PD, default: Nothing. " ::= { gs2328pPoeAutoCheckEntry 6 } gs2328pPoeAutoCheckRebootTime OBJECT-TYPE SYNTAX Integer32(3..120) MAX-ACCESS read-write STATUS current DESCRIPTION "When PD has been rebooted, the PoE port restored power after the specified time. default: 15, range: 3-120 sec. " ::= { gs2328pPoeAutoCheckEntry 7 } gs2328pPoeScheduling OBJECT IDENTIFIER ::= { gs2328pPoe 4 } gs2328pPoeSchedulingTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PPoeSchedulingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure PoE Scheduling Table. " ::= { gs2328pPoeScheduling 1 } gs2328pPoeSchedulingEntry OBJECT-TYPE SYNTAX GS2328PPoeSchedulingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pPoeSchedulingPort } ::= { gs2328pPoeSchedulingTable 1 } GS2328PPoeSchedulingEntry ::= SEQUENCE { gs2328pPoeSchedulingPort Integer32, gs2328pPoeSchedulingStatus INTEGER } gs2328pPoeSchedulingPort OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pPoeSchedulingEntry 1 } gs2328pPoeSchedulingStatus OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "PoE Scheduling Status. 0: Disable, 1: Enable, default: Disable. " ::= { gs2328pPoeSchedulingEntry 2 } gs2328pPoeSchedulingTimeTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PPoeSchedulingTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show Poe Scheduling Time Config. " ::= { gs2328pPoeScheduling 2 } gs2328pPoeSchedulingTimeEntry OBJECT-TYPE SYNTAX GS2328PPoeSchedulingTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pPoeSchedulingTimePort, gs2328pPoeSchedulingTimeWeek, gs2328pPoeSchedulingTimeHour } ::= { gs2328pPoeSchedulingTimeTable 1 } GS2328PPoeSchedulingTimeEntry ::= SEQUENCE { gs2328pPoeSchedulingTimePort Integer32, gs2328pPoeSchedulingTimeWeek INTEGER, gs2328pPoeSchedulingTimeHour Integer32, gs2328pPoeSchedulingProvidePower INTEGER } gs2328pPoeSchedulingTimePort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pPoeSchedulingTimeEntry 1 } gs2328pPoeSchedulingTimeWeek OBJECT-TYPE SYNTAX INTEGER { monday(1), tuseday(2), wednesday(3), thursday(4), friday(5), saturday(6), sunday(7) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " range: 1-7, Sunday:7, Monday:1, Tuseday:2, Wednesday:3, Thursday:4, Friday:5, Saturday:6. " ::= { gs2328pPoeSchedulingTimeEntry 2 } gs2328pPoeSchedulingTimeHour OBJECT-TYPE SYNTAX Integer32(1..24) MAX-ACCESS not-accessible STATUS current DESCRIPTION " range: 1-24, 24: hour 0, 1: hour 1, 2: hour2..." ::= { gs2328pPoeSchedulingTimeEntry 3 } gs2328pPoeSchedulingProvidePower OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " 0: disable, 1: enable, default: disable. " ::= { gs2328pPoeSchedulingTimeEntry 4 } gs2328pPoeConfiguration OBJECT IDENTIFIER ::= { gs2328pPoe 5 } gs2328pPoeConfigurationPrimaryPowerSupply OBJECT-TYPE SYNTAX Integer32(0..1000) MAX-ACCESS read-only STATUS current DESCRIPTION "It must be defined what amount of power the primary and backup power sources can deliver. " ::= { gs2328pPoeConfiguration 1 } gs2328pPoeConfigurationRetryTime OBJECT-TYPE SYNTAX Integer32(0|5|10|20|30|40|50|60) MAX-ACCESS read-write STATUS current DESCRIPTION "The period (in seconds) for trying to turn on an overloaded PoE port. 0: disable, 5 sec,10 sec,20 sec,30 sec,40 sec,50 sec,60 sec, default: 60 sec. " ::= { gs2328pPoeConfiguration 2 } gs2328pPoeConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PPoeConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure PoE Configuration mode. " ::= { gs2328pPoeConfiguration 3 } gs2328pPoeConfigurationEntry OBJECT-TYPE SYNTAX GS2328PPoeConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pPoeConfigurationPort } ::= { gs2328pPoeConfigurationTable 1 } GS2328PPoeConfigurationEntry ::= SEQUENCE { gs2328pPoeConfigurationPort Integer32, gs2328pPoeConfigurationPoEMode INTEGER, gs2328pPoeConfigurationPriority INTEGER, gs2328pPoeConfigurationMaximumPower DisplayString, gs2328pPoeConfigurationDetection INTEGER, gs2328pPoeConfigurationReset INTEGER } gs2328pPoeConfigurationPort OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pPoeConfigurationEntry 1 } gs2328pPoeConfigurationPoEMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The PoE Mode represents the PoE operating mode for the port. 0: Disable, 1: Enable, default: Enable. " ::= { gs2328pPoeConfigurationEntry 2 } gs2328pPoeConfigurationPriority OBJECT-TYPE SYNTAX INTEGER { low(0), high(1), critical(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Priority represents the ports priority. There are three levels of power priority named Low, High and Critical. 0: Low, 1: High, 2: Critical, default: Low. " ::= { gs2328pPoeConfigurationEntry 3 } gs2328pPoeConfigurationMaximumPower OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The Maximum Power value contains a numerical value that indicates the maximum power in watts that can be delivered to a remote device. default: 15.4[W], max: 30[W]. " ::= { gs2328pPoeConfigurationEntry 4 } gs2328pPoeConfigurationDetection OBJECT-TYPE SYNTAX INTEGER(0..5) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure PoE port capacitor detection. 0: No Detection(read only), 1: legacy, 2: 4-point, 3: 4-point-legacy, 4: 2-point, 5: 2-point-legacy, default: 4-point. " ::= { gs2328pPoeConfigurationEntry 5 } gs2328pPoeConfigurationReset OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the specific PoE port. 0: Disable, 1: Enable, default: Disable. " ::= { gs2328pPoeConfigurationEntry 6 } gs2328pQos OBJECT IDENTIFIER ::= { gs2328pConfiguration 14 } gs2328pQosPortClassification OBJECT IDENTIFIER ::= { gs2328pQos 1 } gs2328pQosPortClassificationTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PQosPortClassificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " QoS Ingress Port Classification . " ::= { gs2328pQosPortClassification 1 } gs2328pQosPortClassificationEntry OBJECT-TYPE SYNTAX GS2328PQosPortClassificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pQosPortClassificationPort } ::= { gs2328pQosPortClassificationTable 1 } GS2328PQosPortClassificationEntry ::= SEQUENCE { gs2328pQosPortClassificationPort Integer32, gs2328pQosPortClassificationQoSclass Integer32, gs2328pQosPortClassificationDPlevel Integer32, gs2328pQosPortClassificationPCP Integer32, gs2328pQosPortClassificationDEI INTEGER, gs2328pQosPortClassificationTagClass INTEGER, gs2328pQosPortClassificationDSCPBased INTEGER, gs2328pQosPortClassificationAddressMode INTEGER } gs2328pQosPortClassificationPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pQosPortClassificationEntry 1 } gs2328pQosPortClassificationQoSclass OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the default QoS class, i.e., the QoS class for frames not classified in any other way. There is a one to one mapping between QoS class, queue and priority. A QoS class of 0 (zero) has the lowest priority. Note: If the QoS class has been dynamically changed, then the actual QoS class is shown in parentheses after the configured QoS class. Configure the default QoS class. range: 0-7, default: 0. " ::= { gs2328pQosPortClassificationEntry 2 } gs2328pQosPortClassificationDPlevel OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION " DP level for frames not classified in any other way. range: 0-1, default: 0. " ::= { gs2328pQosPortClassificationEntry 3 } gs2328pQosPortClassificationPCP OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION " Priority Code Point. It is a 3-bit field storing the priority level for the 802.1Q frame. range: 0-7, default: 0. " ::= { gs2328pQosPortClassificationEntry 4 } gs2328pQosPortClassificationDEI OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Drop Eligible Indicator. It is a 1-bit field in the VLAN. range 0-1, default: 0. " ::= { gs2328pQosPortClassificationEntry 5 } gs2328pQosPortClassificationTagClass OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Configure the classification mode for tagged frames. 0: Disable, 1: Enable, default: Disable. " ::= { gs2328pQosPortClassificationEntry 6 } gs2328pQosPortClassificationDSCPBased OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Click to Enable DSCP Based QoS Ingress Port Classification. 0: disable, 1: enable, default: disable. " ::= { gs2328pQosPortClassificationEntry 7 } gs2328pQosPortClassificationAddressMode OBJECT-TYPE SYNTAX INTEGER { source(0), destination(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The IP/MAC address mode specifying whether the QCL classification must be based on source (SMAC/SIP) or destination (DMAC/DIP) addresses on this port. 0: source, 1: destination, default: source. " ::= { gs2328pQosPortClassificationEntry 8 } gs2328pQoSIngressPortTagClassificationTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PQoSIngressPortTagClassificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show QoS Ingress Port Tag Classification. " ::= { gs2328pQosPortClassification 2 } gs2328pQoSIngressPortTagClassificationEntry OBJECT-TYPE SYNTAX GS2328PQoSIngressPortTagClassificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pQoSIngressPortTagClassificationPort, gs2328pQoSIngressPortTagPCP, gs2328pQoSIngressPortTagDEI } ::= { gs2328pQoSIngressPortTagClassificationTable 1 } GS2328PQoSIngressPortTagClassificationEntry ::= SEQUENCE { gs2328pQoSIngressPortTagClassificationPort Integer32, gs2328pQoSIngressPortTagPCP INTEGER, gs2328pQoSIngressPortTagDEI INTEGER, gs2328pQoSIngressPortTagQosClass Integer32, gs2328pQoSIngressPortTagDPLevel Integer32 } gs2328pQoSIngressPortTagClassificationPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pQoSIngressPortTagClassificationEntry 1 } gs2328pQoSIngressPortTagPCP OBJECT-TYPE SYNTAX INTEGER { pcp0(1), pcp1(2), pcp2(3), pcp3(4), pcp4(5), pcp5(6), pcp6(7), pcp7(8) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " range: 1-8, PCP0:1, PCP1:2... " ::= { gs2328pQoSIngressPortTagClassificationEntry 2 } gs2328pQoSIngressPortTagDEI OBJECT-TYPE SYNTAX INTEGER { dei0(1), dei1(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " range: 1-2, DEI0:1, DEI1:2. " ::= { gs2328pQoSIngressPortTagClassificationEntry 3 } gs2328pQoSIngressPortTagQosClass OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION " range: 0-7. " ::= { gs2328pQoSIngressPortTagClassificationEntry 4 } gs2328pQoSIngressPortTagDPLevel OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION " range: 0-1. " ::= { gs2328pQoSIngressPortTagClassificationEntry 5 } gs2328pQosPortPolicingTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PQosPortPolicingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " configure the Policer settings for all switch ports. " ::= { gs2328pQos 2 } gs2328pQosPortPolicingEntry OBJECT-TYPE SYNTAX GS2328PQosPortPolicingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pQosPortPolicingPort } ::= { gs2328pQosPortPolicingTable 1 } GS2328PQosPortPolicingEntry ::= SEQUENCE { gs2328pQosPortPolicingPort Integer32, gs2328pQosPortPolicingMode INTEGER, gs2328pQosPortPolicingRate Integer32, gs2328pQosPortPolicingUnit INTEGER, gs2328pQosPortPolicingFlowControl INTEGER } gs2328pQosPortPolicingPort OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pQosPortPolicingEntry 1 } gs2328pQosPortPolicingMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Controls whether the policer is enabled on this switch port. 0: disable, 1: enable, default: disable. " ::= { gs2328pQosPortPolicingEntry 2 } gs2328pQosPortPolicingRate OBJECT-TYPE SYNTAX Integer32(100..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Controls the rate for the policer. range: 100-10000000(kbps/fps), default: 500(kbps). " ::= { gs2328pQosPortPolicingEntry 3 } gs2328pQosPortPolicingUnit OBJECT-TYPE SYNTAX INTEGER { kbps(0), fps(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Controls the unit of measure for the policer rate. 0: kbps, 1: fps, default: kbps. " ::= { gs2328pQosPortPolicingEntry 4 } gs2328pQosPortPolicingFlowControl OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " If flow control is enabled and the port is in flow control mode, then pause frames are sent instead of discarding frames. 0: disable, 1: enable, default: disable. " ::= { gs2328pQosPortPolicingEntry 5 } gs2328pQosPortScheduler OBJECT IDENTIFIER ::= { gs2328pQos 3 } gs2328pQosPortSchedulerModeTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PQosPortSchedulerModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " configure the basic QoS Port Scheduler Mode settings for all switch ports. " ::= { gs2328pQosPortScheduler 1 } gs2328pQosPortSchedulerModeEntry OBJECT-TYPE SYNTAX GS2328PQosPortSchedulerModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pQosSchedulerModePort } ::= { gs2328pQosPortSchedulerModeTable 1 } GS2328PQosPortSchedulerModeEntry ::= SEQUENCE { gs2328pQosSchedulerModePort Integer32, gs2328pQosSchedulerMode INTEGER, gs2328pQosSchedulerShaper INTEGER, gs2328pQosSchedulerShaperRate Integer32 } gs2328pQosSchedulerModePort OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pQosPortSchedulerModeEntry 1 } gs2328pQosSchedulerMode OBJECT-TYPE SYNTAX INTEGER { strictPriority(0), weighted(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Controls whether the scheduler mode is Strict Priority or Weighted on this switch port. 0:Strict Priority 1:Weighted default: Strict Priority. " ::= { gs2328pQosPortSchedulerModeEntry 2 } gs2328pQosSchedulerShaper OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Controls whether the port shaper is enabled 0: Disable 1: Enable. default: disable. " ::= { gs2328pQosPortSchedulerModeEntry 3 } gs2328pQosSchedulerShaperRate OBJECT-TYPE SYNTAX Integer32(100..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Controls the rate for the port shaper. range: 100-1000000 default: 500 kbps. " ::= { gs2328pQosPortSchedulerModeEntry 4 } gs2328pQosPortSchedulerTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PQosPortSchedulerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show Qos Port Scheduler. " ::= { gs2328pQosPortScheduler 2 } gs2328pQosPortSchedulerEntry OBJECT-TYPE SYNTAX GS2328PQosPortSchedulerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pQosSchedulerPort, gs2328pQosSchedulerPortQueue} ::= { gs2328pQosPortSchedulerTable 1 } GS2328PQosPortSchedulerEntry ::= SEQUENCE { gs2328pQosSchedulerPort Integer32, gs2328pQosSchedulerPortQueue INTEGER, gs2328pQosSchedulerPortQueueShaper INTEGER, gs2328pQosSchedulerPortQueueShaperRate Integer32, gs2328pQosSchedulerPortQueueShaperExcess INTEGER, gs2328pQosSchedulerPortQueueSchedulerWeight Integer32, gs2328pQosSchedulerPortQueueSchedulerPercent DisplayString } gs2328pQosSchedulerPort OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pQosPortSchedulerEntry 1 } gs2328pQosSchedulerPortQueue OBJECT-TYPE SYNTAX INTEGER { q0(1), q1(2), q2(3), q3(4), q4(5), q5(6), q6(7), q7(8) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " range: 1-8. Q0: 1, Q1: 2, ... " ::= { gs2328pQosPortSchedulerEntry 2 } gs2328pQosSchedulerPortQueueShaper OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " 0: disable 1:enable, default: 0. " ::= { gs2328pQosPortSchedulerEntry 3 } gs2328pQosSchedulerPortQueueShaperRate OBJECT-TYPE SYNTAX Integer32(100..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION " range: 100..1000000 kbps. " ::= { gs2328pQosPortSchedulerEntry 4 } gs2328pQosSchedulerPortQueueShaperExcess OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " 0: disable 1:enable, default: 0. " ::= { gs2328pQosPortSchedulerEntry 5 } gs2328pQosSchedulerPortQueueSchedulerWeight OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-write STATUS current DESCRIPTION " range: 1-100, default: 17. Only use in Q0 - Q5. Q6 & Q7 show 0 " ::= { gs2328pQosPortSchedulerEntry 6 } gs2328pQosSchedulerPortQueueSchedulerPercent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Only use in Q0 - Q5. Q6 & Q7 show empty " ::= { gs2328pQosPortSchedulerEntry 7 } gs2328pQosPortEgressTagRemarking OBJECT IDENTIFIER ::= { gs2328pQos 4 } gs2328pQosPortEgressTagRemarkingTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PQosPortEgressTagRemarkingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " configure the basic QoS Port Egress Tag Remark Configuration settings for all switch ports. " ::= { gs2328pQosPortEgressTagRemarking 1 } gs2328pQosPortEgressTagRemarkingEntry OBJECT-TYPE SYNTAX GS2328PQosPortEgressTagRemarkingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pQosEgressTagRemarkingPort } ::= { gs2328pQosPortEgressTagRemarkingTable 1 } GS2328PQosPortEgressTagRemarkingEntry ::= SEQUENCE { gs2328pQosEgressTagRemarkingPort Integer32, gs2328pQosEgressTagRemarkingMode INTEGER } gs2328pQosEgressTagRemarkingPort OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pQosPortEgressTagRemarkingEntry 1 } gs2328pQosEgressTagRemarkingMode OBJECT-TYPE SYNTAX INTEGER { classified(0), default(1), mapped(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " the tag remarking mode for this port. 0:Classified, Use classified PCP/DEI values. 1:Default, Use default PCP/DEI values. 2:Mapped, Use mapped versions of QoS class and DP level." ::= { gs2328pQosPortEgressTagRemarkingEntry 2 } gs2328pQosPortEgressTagRemarkingDefTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PQosPortEgressTagRemarkingDefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " configure the basic QoS Port Egress Tag Remark Configuration settings for all switch ports. " ::= { gs2328pQosPortEgressTagRemarking 2 } gs2328pQosPortEgressTagRemarkingDefEntry OBJECT-TYPE SYNTAX GS2328PQosPortEgressTagRemarkingDefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pQosEgressTagRemarkingDefPort } ::= { gs2328pQosPortEgressTagRemarkingDefTable 1 } GS2328PQosPortEgressTagRemarkingDefEntry ::= SEQUENCE { gs2328pQosEgressTagRemarkingDefPort Integer32, gs2328pQosEgressTagRemarkingDefPCP Integer32, gs2328pQosEgressTagRemarkingDefDEI INTEGER } gs2328pQosEgressTagRemarkingDefPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pQosPortEgressTagRemarkingDefEntry 1 } gs2328pQosEgressTagRemarkingDefPCP OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION " Controls the default PCP Range : 0-7" ::= { gs2328pQosPortEgressTagRemarkingDefEntry 2 } gs2328pQosEgressTagRemarkingDefDEI OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " controls the DEI Range 0-1" ::= { gs2328pQosPortEgressTagRemarkingDefEntry 3 } gs2328pQosPortEgressTagRemarkingMapTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PQosPortEgressTagRemarkingMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show Qos Port Egress Tag Remarking Map. " ::= { gs2328pQosPortEgressTagRemarking 4 } gs2328pQosPortEgressTagRemarkingMapEntry OBJECT-TYPE SYNTAX GS2328PQosPortEgressTagRemarkingMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pQosPortEgressTagRemarkingMapPort, gs2328pQosTagRemarkingQoSClass, gs2328pQosTagRemarkingDPLevel } ::= { gs2328pQosPortEgressTagRemarkingMapTable 1 } GS2328PQosPortEgressTagRemarkingMapEntry ::= SEQUENCE { gs2328pQosPortEgressTagRemarkingMapPort Integer32, gs2328pQosTagRemarkingQoSClass INTEGER, gs2328pQosTagRemarkingDPLevel INTEGER, gs2328pQosTagRemarkingPCP Integer32, gs2328pQosTagRemarkingDEI INTEGER } gs2328pQosPortEgressTagRemarkingMapPort OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pQosPortEgressTagRemarkingMapEntry 1 } gs2328pQosTagRemarkingQoSClass OBJECT-TYPE SYNTAX INTEGER { class0(1), class1(2), class2(3), class3(4), class4(5), class5(6), class6(7), class7(8) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " range: 1-8, QoS Class0: 1, QoS Class1: 2... " ::= { gs2328pQosPortEgressTagRemarkingMapEntry 2 } gs2328pQosTagRemarkingDPLevel OBJECT-TYPE SYNTAX INTEGER { level0(1), level1(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " range: 1-2, DP Level0: 1, DP Level1: 2. " ::= { gs2328pQosPortEgressTagRemarkingMapEntry 3 } gs2328pQosTagRemarkingPCP OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION " range: 0-7. " ::= { gs2328pQosPortEgressTagRemarkingMapEntry 4 } gs2328pQosTagRemarkingDEI OBJECT-TYPE SYNTAX INTEGER (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION " range: 0-1. " ::= { gs2328pQosPortEgressTagRemarkingMapEntry 5 } gs2328pQosPortDSCPTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PQosPortDSCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " configure the basic QoS Port DSCP Configuration settings for all switch ports. " ::= { gs2328pQos 5 } gs2328pQosPortDSCPEntry OBJECT-TYPE SYNTAX GS2328PQosPortDSCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pQosPortDSCPPort } ::= { gs2328pQosPortDSCPTable 1 } GS2328PQosPortDSCPEntry ::= SEQUENCE { gs2328pQosPortDSCPPort Integer32, gs2328pQosPortDSCPIngressTranslate INTEGER, gs2328pQosPortDSCPIngressClassify INTEGER, gs2328pQosPortDSCPEgressRewrite INTEGER } gs2328pQosPortDSCPPort OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pQosPortDSCPEntry 1 } gs2328pQosPortDSCPIngressTranslate OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Configure DSCP ingress translation mode. 0: disable, 1: enable, default: disable. " ::= { gs2328pQosPortDSCPEntry 2 } gs2328pQosPortDSCPIngressClassify OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Classification for a port have 4 different values. range: 0-3, 0: disable,No Ingress DSCP Classification. 1: DSCP=0,Classify if incoming (or translated if enabled) DSCP is 0. 2: Selected,Classify only selected DSCP for which classification is enabled as specified in DSCP Translation window for the specific DSCP. 3: All,Classify all DSCP. default: disable. " ::= { gs2328pQosPortDSCPEntry 3 } gs2328pQosPortDSCPEgressRewrite OBJECT-TYPE SYNTAX INTEGER(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION " Configure the port egress rewriting mode. range: 0-2 0: Disable,No Egress rewrite. 1: Enable, Rewrite enabled without remapping. 2: Remap DP Unaware , DSCP from analyzer is remapped and frame is remarked with remapped DSCP value. The remapped DSCP value is always taken from the DSCP Translation->Egress Remap DP0 table. 3: Remap DP Aware: DSCP from analyzer is remapped and frame is remarked with remapped DSCP value. Depending on the DP level of the frame, the remapped DSCP value is either taken from the DSCP Translation->Egress Remap DP0 table or from the DSCP Translation->Egress Remap DP1 table. default: disable. " ::= { gs2328pQosPortDSCPEntry 4 } gs2328pQosDSCPTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PQosDSCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " configure the basic QoS DSCP based QoS Ingress Classification settings for all switches. " ::= { gs2328pQos 6 } gs2328pQosDSCPEntry OBJECT-TYPE SYNTAX GS2328PQosDSCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pQosDSCPList } ::= { gs2328pQosDSCPTable 1 } GS2328PQosDSCPEntry ::= SEQUENCE { gs2328pQosDSCPList Integer32, gs2328pQosDSCP DisplayString, gs2328pQosDSCPTrust INTEGER, gs2328pQosDSCPQosClass Integer32, gs2328pQosDSCPDPL INTEGER } gs2328pQosDSCPList OBJECT-TYPE SYNTAX Integer32(1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION " DSCP mapping table index(1-64). " ::= { gs2328pQosDSCPEntry 1 } gs2328pQosDSCP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of supported DSCP values are 64." ::= { gs2328pQosDSCPEntry 2 } gs2328pQosDSCPTrust OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Controls whether a specific DSCP value is trusted. Only frames with trusted DSCP values are mapped to a specific QoS class and Drop Precedence Level. Frames with untrusted DSCP values are treated as a non-IP frame. 0: disable, 1: enable, default: disable. " ::= { gs2328pQosDSCPEntry 3 } gs2328pQosDSCPQosClass OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION " QoS class. range: 0-7, default: 0. " ::= { gs2328pQosDSCPEntry 4 } gs2328pQosDSCPDPL OBJECT-TYPE SYNTAX INTEGER(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION " Drop Precedence Level. range: 0-1, default: disable. " ::= { gs2328pQosDSCPEntry 5 } gs2328pQosDSCPTranslationTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PQosDSCPTranslationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " configure the basic QoS DSCP Translation settings for all switches. " ::= { gs2328pQos 7 } gs2328pQosDSCPTranslationEntry OBJECT-TYPE SYNTAX GS2328PQosDSCPTranslationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pQosDSCPTranslationList } ::= { gs2328pQosDSCPTranslationTable 1 } GS2328PQosDSCPTranslationEntry ::= SEQUENCE { gs2328pQosDSCPTranslationList Integer32, gs2328pQosDSCPTranslationDSCPBasedId DisplayString, gs2328pQosDSCPTranslationIngressTranslate Integer32, gs2328pQosDSCPTranslationIngressClassify INTEGER, gs2328pQosDSCPTranslationEgressRemapDP0 Integer32, gs2328pQosDSCPTranslationEgressRemapDP1 Integer32 } gs2328pQosDSCPTranslationList OBJECT-TYPE SYNTAX Integer32(1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION " DSCP translation table index(1-64). " ::= { gs2328pQosDSCPTranslationEntry 1 } gs2328pQosDSCPTranslationDSCPBasedId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Configure global ingress DSCP translation table. " ::= { gs2328pQosDSCPTranslationEntry 2 } gs2328pQosDSCPTranslationIngressTranslate OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION " DSCP at Ingress side can be translated to any of DSCP values. range: 0-63, default: 0. " ::= { gs2328pQosDSCPTranslationEntry 3 } gs2328pQosDSCPTranslationIngressClassify OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Configure DSCP ingress classification. 0: disable, 1: enable, default: disable. " ::= { gs2328pQosDSCPTranslationEntry 4 } gs2328pQosDSCPTranslationEgressRemapDP0 OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the remapping for frames with DP level 0. Select the DSCP value from select menu to which you want to remap. range: 0-63, default: 0. " ::= { gs2328pQosDSCPTranslationEntry 5 } gs2328pQosDSCPTranslationEgressRemapDP1 OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the remapping for frames with DP level 1. Select the DSCP value from select menu to which you want to remap. range: 0-63, default: 0. " ::= { gs2328pQosDSCPTranslationEntry 6 } gs2328pQosDSCPClassificationTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PQosDSCPClassificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " configure the mapping of QoS class to DSCP value. " ::= { gs2328pQos 8 } gs2328pQosDSCPClassificationEntry OBJECT-TYPE SYNTAX GS2328PQosDSCPClassificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pQosDSCPClassificationQoSClass, gs2328pQosDSCPClassificationDPL } ::= { gs2328pQosDSCPClassificationTable 1 } GS2328PQosDSCPClassificationEntry ::= SEQUENCE { gs2328pQosDSCPClassificationQoSClass INTEGER, gs2328pQosDSCPClassificationDPL INTEGER, gs2328pQosDSCPClassificationDSCP Integer32 } gs2328pQosDSCPClassificationQoSClass OBJECT-TYPE SYNTAX INTEGER { class0(1), class1(2), class2(3), class3(4), class4(5), class5(6), class6(7), class7(8) } MAX-ACCESS not-accessible STATUS current DESCRIPTION " Actual QoS class. Index 1~8 mean Qos Class 0~7." ::= { gs2328pQosDSCPClassificationEntry 1 } gs2328pQosDSCPClassificationDPL OBJECT-TYPE SYNTAX INTEGER(1|2) MAX-ACCESS not-accessible STATUS current DESCRIPTION " DPL. Index 1~2 mean DPL 0~1." ::= { gs2328pQosDSCPClassificationEntry 2 } gs2328pQosDSCPClassificationDSCP OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION " Select the classified DSCP value. range: 0-63, default: 0. " ::= { gs2328pQosDSCPClassificationEntry 3 } gs2328pQosControlList OBJECT IDENTIFIER ::= { gs2328pQos 9 } gs2328pQosQceCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create an Qos entry" ::= { gs2328pQosControlList 1 } gs2328pQosQceTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PQosQceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Create Qos QCE entry. " ::= { gs2328pQosControlList 2 } gs2328pQosQceEntry OBJECT-TYPE SYNTAX GS2328PQosQceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pQosQceIndex } ::= { gs2328pQosQceTable 1 } GS2328PQosQceEntry ::= SEQUENCE { gs2328pQosQceIndex Integer32, gs2328pQosQceID Integer32, gs2328pQosQceNextID Integer32, gs2328pQosQcePortMembers DisplayString, gs2328pQosQceTag DisplayString, gs2328pQosQceVID DisplayString, gs2328pQosPCP DisplayString, gs2328pQosDEI DisplayString, gs2328pQosSMAC DisplayString, gs2328pQosDMACType DisplayString, gs2328pQosFrameType INTEGER, gs2328pQosMacEtherType DisplayString, gs2328pQosLLCSSAPAddr DisplayString, gs2328pQosLLCDSAPAddr DisplayString, gs2328pQosLLCControl DisplayString, gs2328pQosSNAPPID DisplayString, gs2328pQosIpv4Protocol DisplayString, gs2328pQosIpv4ProtocolValue Integer32, gs2328pQosIpv4ProtocolUDPSport DisplayString, gs2328pQosIpv4ProtocolUDPDport DisplayString, gs2328pQosIpv4ProtocolTCPSport DisplayString, gs2328pQosIpv4ProtocolTCPDport DisplayString, gs2328pQosIpv4Ip DisplayString, gs2328pQosIpv4Mask DisplayString, gs2328pQosIpv4IPFragment INTEGER, gs2328pQosIpv4DSCP DisplayString, gs2328pQosIpv6Protocol DisplayString, gs2328pQosIpv6ProtocolValue Integer32, gs2328pQosIpv6ProtocolUDPSport DisplayString, gs2328pQosIpv6ProtocolUDPDport DisplayString, gs2328pQosIpv6ProtocolTCPSport DisplayString, gs2328pQosIpv6ProtocolTCPDport DisplayString, gs2328pQosIpv6Ip DisplayString, gs2328pQosIpv6Mask DisplayString, gs2328pQosIpv6DSCP DisplayString, gs2328pQosActionClass Integer32, gs2328pQosActionDPL INTEGER, gs2328pQosActionDSCP Integer32, gs2328pQosQceRowStatus INTEGER } gs2328pQosQceIndex OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pQosQceEntry 1 } gs2328pQosQceID OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS read-write STATUS current DESCRIPTION " If the QCE ID is specified and an entry with this QCE ID already exists, the QCE will be modified. Otherwise, a new QCE will be added. range : 1 - 256. " ::= { gs2328pQosQceEntry 2 } gs2328pQosQceNextID OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS read-write STATUS current DESCRIPTION " If the next QCE ID is non zero, the QCE will be placed before this QCE in the list. If the next QCE ID is zero, the QCE will be placed last in the list. range : 1 - 256. " ::= { gs2328pQosQceEntry 3 } gs2328pQosQcePortMembers OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Indicates the ingress port of the QCE. Possible values are: All: The QCE will match all ingress port. Port: The QCE will match a specific ingress port.Format: 1,3-6." ::= { gs2328pQosQceEntry 4 } gs2328pQosQceTag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Value of Tag field can be 'Any', 'Untag' or 'Tag'. " ::= { gs2328pQosQceEntry 5 } gs2328pQosQceVID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Valid value of VLAN ID can be any value in 'Specific 1~4094' or 'range 1-4094' or 'Any'. " ::= { gs2328pQosQceEntry 6 } gs2328pQosPCP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'. " ::= { gs2328pQosQceEntry 7 } gs2328pQosDEI OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or 'Any'. " ::= { gs2328pQosQceEntry 8 } gs2328pQosSMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Source MAC address: 24 MS bits OUI(00-00-00 ~ FF-FF-FF) or 'Any'. " ::= { gs2328pQosQceEntry 9 } gs2328pQosDMACType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Destination MAC type: possible values are 'UC'(unicast), 'MC'(multicast), 'BC'(broadcast) or 'Any'. " ::= { gs2328pQosQceEntry 10 } gs2328pQosFrameType OBJECT-TYPE SYNTAX INTEGER { any(1), ethernet(2), llc(3), snap(4), ipv4(5), ipv6(6) } MAX-ACCESS read-write STATUS current DESCRIPTION " Frame Type can have any of the following values: 1: Any, 2: Ethernet, 3: LLC, 4: SNAP, 5: IPv4, 6: IPv6. " ::= { gs2328pQosQceEntry 11 } gs2328pQosMacEtherType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Valid ethernet type can have a value within 0x600-0xFFFF or 'Any' , but excluding 0x800(IPv4) and 0x86DD(IPv6), range: 0000-FFFF, default: Any." ::= { gs2328pQosQceEntry 12 } gs2328pQosLLCSSAPAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Valid SSAP(Source Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any. " ::= { gs2328pQosQceEntry 13 } gs2328pQosLLCDSAPAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Valid DSAP(Destination Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any. " ::= { gs2328pQosQceEntry 14 } gs2328pQosLLCControl OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Valid Control field can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any. " ::= { gs2328pQosQceEntry 15 } gs2328pQosSNAPPID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Valid PID(a.k.a ethernet type) can have value within 0x00-0xFFFF or 'Any', range: 0000-FFFF, default: Any. " ::= { gs2328pQosQceEntry 16 } gs2328pQosIpv4Protocol OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " IP protocol number: (Other, TCP or UDP) or 'Any'. " ::= { gs2328pQosQceEntry 17 } gs2328pQosIpv4ProtocolValue OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " Ipv4 Protocol is Other. range: 0-255 default: 0. " ::= { gs2328pQosQceEntry 18 } gs2328pQosIpv4ProtocolUDPSport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. " ::= { gs2328pQosQceEntry 19 } gs2328pQosIpv4ProtocolUDPDport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. " ::= { gs2328pQosQceEntry 20 } gs2328pQosIpv4ProtocolTCPSport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. " ::= { gs2328pQosQceEntry 21 } gs2328pQosIpv4ProtocolTCPDport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. " ::= { gs2328pQosQceEntry 22 } gs2328pQosIpv4Ip OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Specific Source IP address in value format or value 0.0.0.0 is 'Any'. if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'. (x.y.z.w),x=0 unless y.z.w also 0,x not is 127 or greater than 223. If a port is configured to match on DMAC/DIP, this field is the Destination IP address." ::= { gs2328pQosQceEntry 23 } gs2328pQosIpv4Mask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Specific IP address in mask format or value 0.0.0.0 is 'Any'. " ::= { gs2328pQosQceEntry 24 } gs2328pQosIpv4IPFragment OBJECT-TYPE SYNTAX INTEGER { any(0), no(1), yes(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " IPv4 frame fragmented option: 2: yes, 1: no, 0: any. " ::= { gs2328pQosQceEntry 25 } gs2328pQosIpv4DSCP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63. " ::= { gs2328pQosQceEntry 26 } gs2328pQosIpv6Protocol OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " IP protocol number: (Other, TCP or UDP) or 'Any'. " ::= { gs2328pQosQceEntry 27 } gs2328pQosIpv6ProtocolValue OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION " when IPv6 protocol is Other , range: 0-255. " ::= { gs2328pQosQceEntry 28 } gs2328pQosIpv6ProtocolUDPSport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. " ::= { gs2328pQosQceEntry 29 } gs2328pQosIpv6ProtocolUDPDport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. " ::= { gs2328pQosQceEntry 30 } gs2328pQosIpv6ProtocolTCPSport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. " ::= { gs2328pQosQceEntry 31 } gs2328pQosIpv6ProtocolTCPDport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP. " ::= { gs2328pQosQceEntry 32 } gs2328pQosIpv6Ip OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " IPv6 source address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits. If a port is configured to match on DMAC/DIP, this field is the Destination IP address." ::= { gs2328pQosQceEntry 33 } gs2328pQosIpv6Mask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " IPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits. " ::= { gs2328pQosQceEntry 34 } gs2328pQosIpv6DSCP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43. " ::= { gs2328pQosQceEntry 35 } gs2328pQosActionClass OBJECT-TYPE SYNTAX Integer32(0..8) MAX-ACCESS read-write STATUS current DESCRIPTION " QoS class: (0-7) or 8: Default." ::= { gs2328pQosQceEntry 36 } gs2328pQosActionDPL OBJECT-TYPE SYNTAX INTEGER (0..4) MAX-ACCESS read-write STATUS current DESCRIPTION " DP Valid Drop Precedence Level can be (0-3) or 4: Default. " ::= { gs2328pQosQceEntry 37 } gs2328pQosActionDSCP OBJECT-TYPE SYNTAX Integer32(0..64) MAX-ACCESS read-write STATUS current DESCRIPTION " Valid DSCP value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or 64: Default. " ::= { gs2328pQosQceEntry 38 } gs2328pQosQceRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4) } MAX-ACCESS read-write STATUS current DESCRIPTION " 1: active2: notInservice 4: destroy" ::= { gs2328pQosQceEntry 39 } gs2328pQosQceMoveID OBJECT-TYPE SYNTAX Integer32(0..256) MAX-ACCESS read-write STATUS current DESCRIPTION " Move Qos, default: 0 Qos ID must be exist. range : 0 - 256." ::= { gs2328pQosControlList 3 } gs2328pQosQceMoveNextID OBJECT-TYPE SYNTAX Integer32(0..256) MAX-ACCESS read-write STATUS current DESCRIPTION " Move Qos, default: 0 If the next Qos ID is non zero, the Qos will be placed before this Qos in the list. If the next Qos ID is zero,the Qos will be placed last in the list. range : 0 - 256. " ::= { gs2328pQosControlList 4 } gs2328pQosQCLStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PQosQCLStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " configure the basic QoS DSCP Translation settings for all switches. " ::= { gs2328pQos 10 } gs2328pQosQCLStatusEntry OBJECT-TYPE SYNTAX GS2328PQosQCLStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pQosQCLStatusList } ::= { gs2328pQosQCLStatusTable 1 } GS2328PQosQCLStatusEntry ::= SEQUENCE { gs2328pQosQCLStatusList Integer32, gs2328pQosQCLStatusUser DisplayString, gs2328pQosQCLStatusQCEId DisplayString, gs2328pQosQCLStatusFrameType DisplayString, gs2328pQosQCLStatusPortlist DisplayString, gs2328pQosQCLStatusActionClass DisplayString, gs2328pQosQCLStatusActionDPL DisplayString, gs2328pQosQCLStatusActionDSCP DisplayString, gs2328pQosQCLStatusActionConflict DisplayString } gs2328pQosQCLStatusList OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " QCL table index. " ::= { gs2328pQosQCLStatusEntry 1} gs2328pQosQCLStatusUser OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the QCL user. " ::= { gs2328pQosQCLStatusEntry 2 } gs2328pQosQCLStatusQCEId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the index of QCE. " ::= { gs2328pQosQCLStatusEntry 3} gs2328pQosQCLStatusFrameType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the type of frame to look for incomming frames. Any: The QCE will match all frame type. Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed. LLC: Only (LLC) frames are allowed. SNAP: Only (SNAP) frames are allowed. IPv4: The QCE will match only IPV4 frames. IPv6: The QCE will match only IPV6 frames." ::= { gs2328pQosQCLStatusEntry 4} gs2328pQosQCLStatusPortlist OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the list of ports configured with the QCE. " ::= { gs2328pQosQCLStatusEntry 5} gs2328pQosQCLStatusActionClass OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Classified QoS class; if a frame matches the QCE it will be put in the queue. " ::= { gs2328pQosQCLStatusEntry 6} gs2328pQosQCLStatusActionDPL OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Drop Precedence Level; if a frame matches the QCE then DP level will set to value displayed under DPL column." ::= { gs2328pQosQCLStatusEntry 7} gs2328pQosQCLStatusActionDSCP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " If a frame matches the QCE then DSCP will be classified with the value displayed under DSCP column." ::= { gs2328pQosQCLStatusEntry 8} gs2328pQosQCLStatusActionConflict OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " If a frame matches the QCE then DSCP will be classified with the value displayed under DSCP column. " ::= { gs2328pQosQCLStatusEntry 9} gs2328pQosStormControl OBJECT IDENTIFIER ::= { gs2328pQos 11 } gs2328pQoSStormControlUC OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the storm control status for the Unicast frame type. default: 0 0: disable 1: enable" ::= { gs2328pQosStormControl 2 } gs2328pQoSStormControlUCRate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The rate unit is packets per second (pps). Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K or 1024K." ::= { gs2328pQosStormControl 3 } gs2328pQoSStormControlMC OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the storm control status for the Multicast frame type. default: 0 0: disable 1: enable" ::= { gs2328pQosStormControl 4 } gs2328pQoSStormControlMCRate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The rate unit is packets per second (pps). Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K or 1024K." ::= { gs2328pQosStormControl 5 } gs2328pQoSStormControlBC OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the storm control status for the Broadcast frame type. default: 0 0: disable 1: enable" ::= { gs2328pQosStormControl 6 } gs2328pQoSStormControlBCRate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The rate unit is packets per second (pps). Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K or 1024K." ::= { gs2328pQosStormControl 7 } gs2328pVlan OBJECT IDENTIFIER ::= { gs2328pConfiguration 15 } gs2328pVlanPorts OBJECT IDENTIFIER ::= { gs2328pVlan 1 } gs2328pVlanPortsTPIDforCustomSport OBJECT-TYPE SYNTAX OCTET STRING(SIZE(2)) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the TPID used for Custom S-ports. This is a global setting for all the Custom S-ports. range: 0x0600-0xffff, default: 0x88a8. " ::= { gs2328pVlanPorts 1 } gs2328pVlanPortsTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PVlanPortsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure Vlan ports Configuration mode. " ::= { gs2328pVlanPorts 2 } gs2328pVlanPortsEntry OBJECT-TYPE SYNTAX GS2328PVlanPortsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pVlanPortsPort } ::= { gs2328pVlanPortsTable 1 } GS2328PVlanPortsEntry ::= SEQUENCE { gs2328pVlanPortsPort Integer32, gs2328pVlanPortsPVID Integer32, gs2328pVlanPortsFrameType INTEGER, gs2328pVlanPortsIngressFilter INTEGER, gs2328pVlanPortsEgressRule INTEGER, gs2328pVlanPortsPortType INTEGER } gs2328pVlanPortsPort OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pVlanPortsEntry 1 } gs2328pVlanPortsPVID OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure PVID. range: 1-4094, default: 1. " ::= { gs2328pVlanPortsEntry 2 } gs2328pVlanPortsFrameType OBJECT-TYPE SYNTAX INTEGER { all(0), tagged(1), untagged(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure frame type of switch ports. 0: all, 1: tagged, 2: untagged, default: all. " ::= { gs2328pVlanPortsEntry 3 } gs2328pVlanPortsIngressFilter OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure ingress filtering of switch ports. 0: disable, 1: enable, default:disable . " ::= { gs2328pVlanPortsEntry 4 } gs2328pVlanPortsEgressRule OBJECT-TYPE SYNTAX INTEGER { access(0), hybrid(1), trunk(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure egress-rule of switch ports. 0: access, 1: hybrid, 2: trunk" ::= { gs2328pVlanPortsEntry 5 } gs2328pVlanPortsPortType OBJECT-TYPE SYNTAX INTEGER { cPort(0), sCustomPort(1), sPort(2), unaware(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure port type of switch ports. 0: c-port, 1: s-custom-port, 2: s-port, 3: unaware. default: c-port. " ::= { gs2328pVlanPortsEntry 6 } gs2328pVlanPrivateVLAN OBJECT IDENTIFIER ::= { gs2328pVlan 2 } gs2328pVlanPrivateVLANMembership OBJECT IDENTIFIER ::= { gs2328pVlanPrivateVLAN 1 } gs2328pVlanPrivateVLANMembershipCreate OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create a pvlan" ::= { gs2328pVlanPrivateVLANMembership 1 } gs2328pVlanPrivateVLANMembershipTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pVlanPrivateVLANMembershipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure Private Vlan Configuration. " ::= { gs2328pVlanPrivateVLANMembership 2 } gs2328pVlanPrivateVLANMembershipEntry OBJECT-TYPE SYNTAX Gs2328pVlanPrivateVLANMembershipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pVlanPrivateVLANIndex } ::= { gs2328pVlanPrivateVLANMembershipTable 1 } Gs2328pVlanPrivateVLANMembershipEntry ::= SEQUENCE { gs2328pVlanPrivateVLANIndex Integer32, gs2328pVlanPrivateVLANID Integer32, gs2328pVlanPrivateVLANMemberships DisplayString, gs2328pVlanPrivateVLANRowStatus INTEGER } gs2328pVlanPrivateVLANIndex OBJECT-TYPE SYNTAX Integer32(1..52) MAX-ACCESS not-accessible STATUS current DESCRIPTION "private VLAN Index. " ::= { gs2328pVlanPrivateVLANMembershipEntry 1 } gs2328pVlanPrivateVLANID OBJECT-TYPE SYNTAX Integer32(1..52) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the ID of this particular private VLAN. The CreateEntry can be modify, the other entry can't be modify." ::= { gs2328pVlanPrivateVLANMembershipEntry 2 } gs2328pVlanPrivateVLANMemberships OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "To include the ports in a Private VLAN" ::= { gs2328pVlanPrivateVLANMembershipEntry 3 } gs2328pVlanPrivateVLANRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy" ::= { gs2328pVlanPrivateVLANMembershipEntry 4 } gs2328pVlanPortIsolationTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pVlanPortIsolationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure Vlan Port Isolation Configuration. " ::= { gs2328pVlanPrivateVLAN 2 } gs2328pVlanPortIsolationEntry OBJECT-TYPE SYNTAX Gs2328pVlanPortIsolationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pVlanPortIsolationPort } ::= { gs2328pVlanPortIsolationTable 1 } Gs2328pVlanPortIsolationEntry ::= SEQUENCE { gs2328pVlanPortIsolationPort Integer32, gs2328pVlanPortIsolation INTEGER } gs2328pVlanPortIsolationPort OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pVlanPortIsolationEntry 1 } gs2328pVlanPortIsolation OBJECT-TYPE SYNTAX INTEGER{ disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:disable 1:enable" ::= { gs2328pVlanPortIsolationEntry 2 } gs2328pMACbasedVLAN OBJECT IDENTIFIER ::= { gs2328pVlan 3 } gs2328pMACbasedVLANConf OBJECT IDENTIFIER ::= { gs2328pMACbasedVLAN 1 } gs2328pMACbasedVLANConfCreate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create MAC base vlan" ::= { gs2328pMACbasedVLANConf 1 } gs2328pMACbasedVLANConfTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pMACbasedVLANConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure Vlan Port Isolation Configuration. " ::= { gs2328pMACbasedVLANConf 2 } gs2328pMACbasedVLANConfEntry OBJECT-TYPE SYNTAX Gs2328pMACbasedVLANConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pMACbasedVLANIndex } ::= { gs2328pMACbasedVLANConfTable 1 } Gs2328pMACbasedVLANConfEntry ::= SEQUENCE { gs2328pMACbasedVLANIndex Integer32, gs2328pMACbasedVLANMACAddress MacAddress, gs2328pMACbasedVLANID Integer32, gs2328pMACbasedMemberships DisplayString, gs2328pMACbaseRowStatus INTEGER } gs2328pMACbasedVLANIndex OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the VLAN ID. " ::= { gs2328pMACbasedVLANConfEntry 1 } gs2328pMACbasedVLANMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the MAC address. The CreateEntry can be modify, the other entry can't be modify." ::= { gs2328pMACbasedVLANConfEntry 2 } gs2328pMACbasedVLANID OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the VLAN ID. " ::= { gs2328pMACbasedVLANConfEntry 3 } gs2328pMACbasedMemberships OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The ports are displayed for each MAC-based VLAN entry. To include the port in a MAC-based VLAN" ::= { gs2328pMACbasedVLANConfEntry 4 } gs2328pMACbaseRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy" ::= { gs2328pMACbasedVLANConfEntry 5 } gs2328pIGMPSnooping OBJECT IDENTIFIER ::= { gs2328pConfiguration 16 } gs2328pIGMPSnoopingBasic OBJECT IDENTIFIER ::= { gs2328pIGMPSnooping 1 } gs2328pIGMPSnoopingEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the Global IGMP Snooping" ::= { gs2328pIGMPSnoopingBasic 1 } gs2328pIGMPSnoopingUnregisteredIPMCv4Flooding OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable unregistered IPMCv4 traffic flooding. " ::= { gs2328pIGMPSnoopingBasic 2 } gs2328pIGMPSnoopingSSMIPRangeAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers run the SSM service model for the groups in the address range. " ::= { gs2328pIGMPSnoopingBasic 3 } gs2328pIGMPSnoopingSSMIPRangeValue OBJECT-TYPE SYNTAX Integer32(4..32) MAX-ACCESS read-write STATUS current DESCRIPTION "SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers run the SSM service model for the groups in the address range value. " ::= { gs2328pIGMPSnoopingBasic 4 } gs2328pIGMPSnoopingProxyEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable IGMP Proxy. This feature can be used to avoid forwarding unnecessary join and leave messages to the router side. " ::= { gs2328pIGMPSnoopingBasic 5 } gs2328pIGMPSnoopingPortRelatedTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pIGMPSnoopingPortRelatedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure IGMP Snooping Port Related Configuration. " ::= { gs2328pIGMPSnoopingBasic 6 } gs2328pIGMPSnoopingPortRelatedEntry OBJECT-TYPE SYNTAX Gs2328pIGMPSnoopingPortRelatedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex } ::= { gs2328pIGMPSnoopingPortRelatedTable 1 } Gs2328pIGMPSnoopingPortRelatedEntry ::= SEQUENCE { gs2328pIGMPSnoopingRouterPort INTEGER, gs2328pIGMPSnoopingFastLeave INTEGER, gs2328pIGMPSnoopingThrottling Integer32 } gs2328pIGMPSnoopingRouterPort OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify which ports act as router ports. A router port is a port on the Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier. If an aggregation member port is selected as a router port, the whole aggregation will act as a router port. " ::= { gs2328pIGMPSnoopingPortRelatedEntry 1 } gs2328pIGMPSnoopingFastLeave OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the fast leave on the port. " ::= { gs2328pIGMPSnoopingPortRelatedEntry 2 } gs2328pIGMPSnoopingThrottling OBJECT-TYPE SYNTAX Integer32(0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Enable to limit the number of multicast groups to which a switch port can belong. 0: unlimited" ::= { gs2328pIGMPSnoopingPortRelatedEntry 3 } gs2328pIGMPSnoopingVLANTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pIGMPSnoopingVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure IGMP Snooping Vlan Configuration. " ::= { gs2328pIGMPSnooping 2 } gs2328pIGMPSnoopingVLANEntry OBJECT-TYPE SYNTAX Gs2328pIGMPSnoopingVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pIGMPSnoopingVLANID } ::= { gs2328pIGMPSnoopingVLANTable 1 } Gs2328pIGMPSnoopingVLANEntry ::= SEQUENCE { gs2328pIGMPSnoopingVLANID Integer32, gs2328pIGMPSnoopingVLANEnable INTEGER, gs2328pIGMPSnoopingVLANIGMPQuerier INTEGER, gs2328pIGMPSnoopingVLANCompatibility INTEGER, gs2328pIGMPSnoopingVLANRV Integer32, gs2328pIGMPSnoopingVLANQI Integer32, gs2328pIGMPSnoopingVLANQRI Integer32, gs2328pIGMPSnoopingVLANLLQI Integer32, gs2328pIGMPSnoopingVLANURI Integer32 } gs2328pIGMPSnoopingVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN ID of the entry" ::= { gs2328pIGMPSnoopingVLANEntry 1 } gs2328pIGMPSnoopingVLANEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the per-VLAN IGMP Snooping. Up to 32 VLANs can be selected for IGMP Snooping. " ::= { gs2328pIGMPSnoopingVLANEntry 2 } gs2328pIGMPSnoopingVLANIGMPQuerier OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the IGMP Querier in the VLAN. " ::= { gs2328pIGMPSnoopingVLANEntry 3 } gs2328pIGMPSnoopingVLANCompatibility OBJECT-TYPE SYNTAX INTEGER { igmpAuto(0), forcedIGMPv1(1), forcedIGMPv2(2), forcedIGMPv3(3), none(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Compatibility is maintained by hosts and routers taking appropriate actions depending on the versions of IGMP operating on hosts and routers within a network. The allowed selection is IGMP-Auto, Forced IGMPv1, Forced IGMPv2, Forced IGMPv3, default compatibility value is IGMP-Auto. " ::= { gs2328pIGMPSnoopingVLANEntry 4 } gs2328pIGMPSnoopingVLANRV OBJECT-TYPE SYNTAX Integer32(-1|1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Robustness Variable. The Robustness Variable allows tuning for the expected packet loss on a network. The allowed range is 1 to 255, default robustness variable value is 2. (-1: none)" ::= { gs2328pIGMPSnoopingVLANEntry 5 } gs2328pIGMPSnoopingVLANQI OBJECT-TYPE SYNTAX Integer32(-1|1..31744) MAX-ACCESS read-write STATUS current DESCRIPTION "Query Interval. The Query Interval is the interval between General Queries sent by the Querier. The allowed range is 1 to 31744 seconds, default query interval is 125 seconds. (-1: none)" ::= { gs2328pIGMPSnoopingVLANEntry 6 } gs2328pIGMPSnoopingVLANQRI OBJECT-TYPE SYNTAX Integer32(-1|0..31744) MAX-ACCESS read-write STATUS current DESCRIPTION "Query Response Interval. The Maximum Response Delay used to calculate the Maximum Response Code inserted into the periodic General Queries. The allowed range is 0 to 31744 in tenths of seconds, default query response interval is 100 in tenths of seconds (10 seconds). (-1: none)" ::= { gs2328pIGMPSnoopingVLANEntry 7 } gs2328pIGMPSnoopingVLANLLQI OBJECT-TYPE SYNTAX Integer32(-1|0..31744) MAX-ACCESS read-write STATUS current DESCRIPTION "LLQI (LMQI for IGMP). Last Member Query Interval. The Last Member Query Time is the time value represented by the Last Member Query Interval, multiplied by the Last Member Query Count. The allowed range is 0 to 31744 in tenths of seconds, default last member query interval is 10 in tenths of seconds (1 second). (-1: none)" ::= { gs2328pIGMPSnoopingVLANEntry 8 } gs2328pIGMPSnoopingVLANURI OBJECT-TYPE SYNTAX Integer32(-1|0..31744) MAX-ACCESS read-write STATUS current DESCRIPTION "Unsolicited Report Interval. The Unsolicited Report Interval is the time between repetitions of a host's initial report of membership in a group. The allowed range is 0 to 31744 seconds, default unsolicited report interval is 1 second. (-1: none)" ::= { gs2328pIGMPSnoopingVLANEntry 9 } gs2328pIGMPSnoopingPortGroupFiltering OBJECT IDENTIFIER ::= { gs2328pIGMPSnooping 3 } gs2328pIGMPSnoopingPortGroupFilteringCreate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create IGMP Snooping Port Group Filtering " ::= { gs2328pIGMPSnoopingPortGroupFiltering 1 } gs2328pIGMPSnoopingPortGroupFilteringTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pIGMPSnoopingPortGroupFilteringEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure IGMP Snooping port group filtering. " ::= { gs2328pIGMPSnoopingPortGroupFiltering 2 } gs2328pIGMPSnoopingPortGroupFilteringEntry OBJECT-TYPE SYNTAX Gs2328pIGMPSnoopingPortGroupFilteringEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pIGMPSnoopingPortGroupFilteringIndex } ::= { gs2328pIGMPSnoopingPortGroupFilteringTable 1 } Gs2328pIGMPSnoopingPortGroupFilteringEntry ::= SEQUENCE { gs2328pIGMPSnoopingPortGroupFilteringIndex Integer32, gs2328pIGMPSnoopingPortGroupFilteringPort Integer32, gs2328pIGMPSnoopingPortGroupFilteringGroups DisplayString, gs2328pIGMPSnoopingPortGroupFilteringRowStatus INTEGER } gs2328pIGMPSnoopingPortGroupFilteringIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "IGMP Snooping Port Group Filtering Configuration Index. " ::= { gs2328pIGMPSnoopingPortGroupFilteringEntry 1 } gs2328pIGMPSnoopingPortGroupFilteringPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The logical port for the settings. " ::= { gs2328pIGMPSnoopingPortGroupFilteringEntry 2 } gs2328pIGMPSnoopingPortGroupFilteringGroups OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Group that will be filtered. " ::= { gs2328pIGMPSnoopingPortGroupFilteringEntry 3 } gs2328pIGMPSnoopingPortGroupFilteringRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy" ::= { gs2328pIGMPSnoopingPortGroupFilteringEntry 4 } gs2328pIGMPSnoopingStatus OBJECT IDENTIFIER ::= { gs2328pIGMPSnooping 4 } gs2328pIGMPSnoopingstatisticClear OBJECT-TYPE SYNTAX INTEGER { none(0), clear(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Clears all Statistics counters." ::= { gs2328pIGMPSnoopingStatus 1 } gs2328pIGMPSnoopingstatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pIGMPSnoopingstatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure Vlan Port Isolation Configuration. " ::= { gs2328pIGMPSnoopingStatus 2 } gs2328pIGMPSnoopingstatisticEntry OBJECT-TYPE SYNTAX Gs2328pIGMPSnoopingstatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pIGMPSnoopingstatisticVLANID } ::= { gs2328pIGMPSnoopingstatisticTable 1 } Gs2328pIGMPSnoopingstatisticEntry ::= SEQUENCE { gs2328pIGMPSnoopingstatisticVLANID Integer32, gs2328pIGMPSnoopingstatisticQuerierVersion DisplayString, gs2328pIGMPSnoopingstatisticHostVersion DisplayString, gs2328pIGMPSnoopingstatisticQuerierStatus DisplayString, gs2328pIGMPSnoopingstatisticQueriesTransmitted Counter32, gs2328pIGMPSnoopingstatisticQueriesReceived Counter32, gs2328pIGMPSnoopingstatisticV1ReportsReceived Counter32, gs2328pIGMPSnoopingstatisticV2ReportsReceived Counter32, gs2328pIGMPSnoopingstatisticV3ReportsReceived Counter32, gs2328pIGMPSnoopingstatisticV2LeavesReceived Counter32 } gs2328pIGMPSnoopingstatisticVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID of the entry. " ::= { gs2328pIGMPSnoopingstatisticEntry 1 } gs2328pIGMPSnoopingstatisticQuerierVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Working Querier Version currently. " ::= { gs2328pIGMPSnoopingstatisticEntry 2 } gs2328pIGMPSnoopingstatisticHostVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Working Host Version currently. " ::= { gs2328pIGMPSnoopingstatisticEntry 3 } gs2328pIGMPSnoopingstatisticQuerierStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the Querier status is ACTIVE or IDLE. DISABLE denotes the specific interface is administratively disabled. " ::= { gs2328pIGMPSnoopingstatisticEntry 4 } gs2328pIGMPSnoopingstatisticQueriesTransmitted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Transmitted Queries. " ::= { gs2328pIGMPSnoopingstatisticEntry 5 } gs2328pIGMPSnoopingstatisticQueriesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received Queries. " ::= { gs2328pIGMPSnoopingstatisticEntry 6 } gs2328pIGMPSnoopingstatisticV1ReportsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V1 Reports. " ::= { gs2328pIGMPSnoopingstatisticEntry 7 } gs2328pIGMPSnoopingstatisticV2ReportsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V2 Reports. " ::= { gs2328pIGMPSnoopingstatisticEntry 8 } gs2328pIGMPSnoopingstatisticV3ReportsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V3 Reports. " ::= { gs2328pIGMPSnoopingstatisticEntry 9 } gs2328pIGMPSnoopingstatisticV2LeavesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V2 Leaves. " ::= { gs2328pIGMPSnoopingstatisticEntry 10 } gs2328pIGMPSnoopingRouterPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pIGMPSnoopingRouterPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure Vlan Port Isolation Configuration. " ::= { gs2328pIGMPSnoopingStatus 3 } gs2328pIGMPSnoopingRouterPortEntry OBJECT-TYPE SYNTAX Gs2328pIGMPSnoopingRouterPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex } ::= { gs2328pIGMPSnoopingRouterPortTable 1 } Gs2328pIGMPSnoopingRouterPortEntry ::= SEQUENCE { gs2328pIGMPSnoopingRouterPortStatus DisplayString } gs2328pIGMPSnoopingRouterPortStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Display which ports act as router ports. A router port is a port on the Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier. Static denotes the specific port is configured to be a router port. Dynamic denotes the specific port is learnt to be a router port. Both denote the specific port is configured or learnt to be a router port. " ::= { gs2328pIGMPSnoopingRouterPortEntry 1 } gs2328pIGMPSnoopingGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pIGMPSnoopingGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IGMP Snooping Groups Information . " ::= { gs2328pIGMPSnooping 5 } gs2328pIGMPSnoopingGroupsEntry OBJECT-TYPE SYNTAX Gs2328pIGMPSnoopingGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pIGMPSnoopingGroupsIndex } ::= { gs2328pIGMPSnoopingGroupsTable 1 } Gs2328pIGMPSnoopingGroupsEntry ::= SEQUENCE { gs2328pIGMPSnoopingGroupsIndex Integer32, gs2328pIGMPSnoopingGroupsVLANID Integer32, gs2328pIGMPSnoopingGroups InetAddress, gs2328pIGMPSnoopingGroupsMemberships DisplayString } gs2328pIGMPSnoopingGroupsIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "IGMP Snooping Groups Index" ::= { gs2328pIGMPSnoopingGroupsEntry 1 } gs2328pIGMPSnoopingGroupsVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN ID of the group. " ::= { gs2328pIGMPSnoopingGroupsEntry 2 } gs2328pIGMPSnoopingGroups OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Group address of the group displayed." ::= { gs2328pIGMPSnoopingGroupsEntry 3 } gs2328pIGMPSnoopingGroupsMemberships OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Ports under this group." ::= { gs2328pIGMPSnoopingGroupsEntry 4 } gs2328pIGMPSnoopingSSMTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pIGMPSnoopingSSMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IGMP SFM (Source-Filtered Multicast) Information Table also contains the SSM (Source-Specific Multicast) information. This table is sorted first by VLAN ID, then by group, and then by Port. Different source addresses belong to the same group are treated as single entry." ::= { gs2328pIGMPSnooping 6 } gs2328pIGMPSnoopingSSMEntry OBJECT-TYPE SYNTAX Gs2328pIGMPSnoopingSSMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pIGMPSnoopingSSMIndex } ::= { gs2328pIGMPSnoopingSSMTable 1 } Gs2328pIGMPSnoopingSSMEntry ::= SEQUENCE { gs2328pIGMPSnoopingSSMIndex Integer32, gs2328pIGMPSnoopingSSMVLANID Integer32, gs2328pIGMPSnoopingSSMGroup DisplayString, gs2328pIGMPSnoopingSSMPort Integer32, gs2328pIGMPSnoopingSSMMode DisplayString, gs2328pIGMPSnoopingSSMSourceAddress DisplayString, gs2328pIGMPSnoopingSSMType DisplayString } gs2328pIGMPSnoopingSSMIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "IGMP Snooping SSM Index" ::= { gs2328pIGMPSnoopingSSMEntry 1 } gs2328pIGMPSnoopingSSMVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN ID of the group. " ::= { gs2328pIGMPSnoopingSSMEntry 2 } gs2328pIGMPSnoopingSSMGroup OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Group address of the group displayed." ::= { gs2328pIGMPSnoopingSSMEntry 3 } gs2328pIGMPSnoopingSSMPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ports under this group." ::= { gs2328pIGMPSnoopingSSMEntry 4 } gs2328pIGMPSnoopingSSMMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the filtering mode maintained per (VLAN ID, port number, Group Address) basis. It can be either Include or Exclude." ::= { gs2328pIGMPSnoopingSSMEntry 5 } gs2328pIGMPSnoopingSSMSourceAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "IP Address of the source. Currently, system limits the total number of IP source addresses for filtering to be 128." ::= { gs2328pIGMPSnoopingSSMEntry 6 } gs2328pIGMPSnoopingSSMType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Type. It can be either Allow or Deny." ::= { gs2328pIGMPSnoopingSSMEntry 7 } gs2328pMLDSnooping OBJECT IDENTIFIER ::= { gs2328pConfiguration 17 } gs2328pMLDSnoopingBasic OBJECT IDENTIFIER ::= { gs2328pMLDSnooping 1 } gs2328pMLDSnoopingEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the Global MLD Snooping" ::= { gs2328pMLDSnoopingBasic 1 } gs2328pMLDSnoopingUnregisteredIPMCv6Flooding OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable unregistered IPMCv6 traffic flooding. " ::= { gs2328pMLDSnoopingBasic 2 } gs2328pMLDSnoopingSSMIPRangeAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers run the SSM service model for the groups in the address range. " ::= { gs2328pMLDSnoopingBasic 3 } gs2328pMLDSnoopingSSMIPRangeValue OBJECT-TYPE SYNTAX Integer32(8..128) MAX-ACCESS read-write STATUS current DESCRIPTION "SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers run the SSM service model for the groups in the address range value. " ::= { gs2328pMLDSnoopingBasic 4 } gs2328pMLDSnoopingProxyEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable MLD Proxy. This feature can be used to avoid forwarding unnecessary join and leave messages to the router side. " ::= { gs2328pMLDSnoopingBasic 5 } gs2328pMLDSnoopingPortRelatedTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pMLDSnoopingPortRelatedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure MLD Snooping Port Related Configuration. " ::= { gs2328pMLDSnoopingBasic 6 } gs2328pMLDSnoopingPortRelatedEntry OBJECT-TYPE SYNTAX Gs2328pMLDSnoopingPortRelatedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex } ::= { gs2328pMLDSnoopingPortRelatedTable 1 } Gs2328pMLDSnoopingPortRelatedEntry ::= SEQUENCE { gs2328pMLDSnoopingRouterPort INTEGER, gs2328pMLDSnoopingFastLeave INTEGER, gs2328pMLDSnoopingThrottling Integer32 } gs2328pMLDSnoopingRouterPort OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify which ports act as router ports. A router port is a port on the Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier. If an aggregation member port is selected as a router port, the whole aggregation will act as a router port. " ::= { gs2328pMLDSnoopingPortRelatedEntry 1 } gs2328pMLDSnoopingFastLeave OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the fast leave on the port. " ::= { gs2328pMLDSnoopingPortRelatedEntry 2 } gs2328pMLDSnoopingThrottling OBJECT-TYPE SYNTAX Integer32(0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Enable to limit the number of multicast groups to which a switch port can belong. 0: unlimited" ::= { gs2328pMLDSnoopingPortRelatedEntry 3 } gs2328pMLDSnoopingVLANTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pMLDSnoopingVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure MLD Snooping Vlan Configuration. " ::= { gs2328pMLDSnooping 2 } gs2328pMLDSnoopingVLANEntry OBJECT-TYPE SYNTAX Gs2328pMLDSnoopingVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pMLDSnoopingVLANID } ::= { gs2328pMLDSnoopingVLANTable 1 } Gs2328pMLDSnoopingVLANEntry ::= SEQUENCE { gs2328pMLDSnoopingVLANID Integer32, gs2328pMLDSnoopingVLANEnable INTEGER, gs2328pMLDSnoopingVLANIGMPQuerier INTEGER, gs2328pMLDSnoopingVLANCompatibility INTEGER, gs2328pMLDSnoopingVLANRV Integer32, gs2328pMLDSnoopingVLANQI Integer32, gs2328pMLDSnoopingVLANQRI Integer32, gs2328pMLDSnoopingVLANLLQI Integer32, gs2328pMLDSnoopingVLANURI Integer32 } gs2328pMLDSnoopingVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN ID of the entry" ::= { gs2328pMLDSnoopingVLANEntry 1 } gs2328pMLDSnoopingVLANEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the per-VLAN MLD Snooping. Up to 32 VLANs can be selected for MLD Snooping. " ::= { gs2328pMLDSnoopingVLANEntry 2 } gs2328pMLDSnoopingVLANIGMPQuerier OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the MLD Querier in the VLAN. " ::= { gs2328pMLDSnoopingVLANEntry 3 } gs2328pMLDSnoopingVLANCompatibility OBJECT-TYPE SYNTAX INTEGER { mldAuto(0), forcedMLDv1(1), forcedMLDv2(2), none(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Compatibility is maintained by hosts and routers taking appropriate actions depending on the versions of IGMP operating on hosts and routers within a network. The allowed selection is MLD-Auto, Forced MLDv1, Forced MLDv2, default compatibility value is IGMP-Auto. " ::= { gs2328pMLDSnoopingVLANEntry 4 } gs2328pMLDSnoopingVLANRV OBJECT-TYPE SYNTAX Integer32(-1|1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Robustness Variable. The Robustness Variable allows tuning for the expected packet loss on a network. The allowed range is 1 to 255, default robustness variable value is 2. (-1: none)" ::= { gs2328pMLDSnoopingVLANEntry 5 } gs2328pMLDSnoopingVLANQI OBJECT-TYPE SYNTAX Integer32(-1|1..31744) MAX-ACCESS read-write STATUS current DESCRIPTION "Query Interval. The Query Interval is the interval between General Queries sent by the Querier. The allowed range is 1 to 31744 seconds, default query interval is 125 seconds. (-1: none)" ::= { gs2328pMLDSnoopingVLANEntry 6 } gs2328pMLDSnoopingVLANQRI OBJECT-TYPE SYNTAX Integer32(-1|0..31744) MAX-ACCESS read-write STATUS current DESCRIPTION "Query Response Interval. The Maximum Response Delay used to calculate the Maximum Response Code inserted into the periodic General Queries. The allowed range is 0 to 31744 in tenths of seconds, default query response interval is 100 in tenths of seconds (10 seconds). (-1: none)" ::= { gs2328pMLDSnoopingVLANEntry 7 } gs2328pMLDSnoopingVLANLLQI OBJECT-TYPE SYNTAX Integer32(-1|0..31744) MAX-ACCESS read-write STATUS current DESCRIPTION "LLQI (LMQI for MLD). Last Member Query Interval. The Last Member Query Time is the time value represented by the Last Member Query Interval, multiplied by the Last Member Query Count. The allowed range is 0 to 31744 in tenths of seconds, default last member query interval is 10 in tenths of seconds (1 second). (-1: none)" ::= { gs2328pMLDSnoopingVLANEntry 8 } gs2328pMLDSnoopingVLANURI OBJECT-TYPE SYNTAX Integer32(-1|0..31744) MAX-ACCESS read-write STATUS current DESCRIPTION "Unsolicited Report Interval. The Unsolicited Report Interval is the time between repetitions of a host's initial report of membership in a group. The allowed range is 0 to 31744 seconds, default unsolicited report interval is 1 second. (-1: none)" ::= { gs2328pMLDSnoopingVLANEntry 9 } gs2328pMLDSnoopingPortGroupFiltering OBJECT IDENTIFIER ::= { gs2328pMLDSnooping 3 } gs2328pMLDSnoopingPortGroupFilteringCreate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create MLD Snooping Port Group Filtering " ::= { gs2328pMLDSnoopingPortGroupFiltering 1 } gs2328pMLDSnoopingPortGroupFilteringTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pMLDSnoopingPortGroupFilteringEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure MLD Snooping port group filtering. " ::= { gs2328pMLDSnoopingPortGroupFiltering 2 } gs2328pMLDSnoopingPortGroupFilteringEntry OBJECT-TYPE SYNTAX Gs2328pMLDSnoopingPortGroupFilteringEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pMLDSnoopingPortGroupFilteringIndex } ::= { gs2328pMLDSnoopingPortGroupFilteringTable 1 } Gs2328pMLDSnoopingPortGroupFilteringEntry ::= SEQUENCE { gs2328pMLDSnoopingPortGroupFilteringIndex Integer32, gs2328pMLDSnoopingPortGroupFilteringPort Integer32, gs2328pMLDSnoopingPortGroupFilteringGroups DisplayString, gs2328pMLDSnoopingPortGroupFilteringRowStatus INTEGER } gs2328pMLDSnoopingPortGroupFilteringIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MLD Snooping Port Group Filtering Configuration Index. " ::= { gs2328pMLDSnoopingPortGroupFilteringEntry 1 } gs2328pMLDSnoopingPortGroupFilteringPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The logical port for the settings. " ::= { gs2328pMLDSnoopingPortGroupFilteringEntry 2 } gs2328pMLDSnoopingPortGroupFilteringGroups OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Group that will be filtered. " ::= { gs2328pMLDSnoopingPortGroupFilteringEntry 3 } gs2328pMLDSnoopingPortGroupFilteringRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy" ::= { gs2328pMLDSnoopingPortGroupFilteringEntry 4 } gs2328pMLDSnoopingStatus OBJECT IDENTIFIER ::= { gs2328pMLDSnooping 4 } gs2328pMLDSnoopingstatisticClear OBJECT-TYPE SYNTAX INTEGER { none(0), clear(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Clears all Statistics counters." ::= { gs2328pMLDSnoopingStatus 1 } gs2328pMLDSnoopingstatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pMLDSnoopingstatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure Vlan Port Isolation Configuration. " ::= { gs2328pMLDSnoopingStatus 2 } gs2328pMLDSnoopingstatisticEntry OBJECT-TYPE SYNTAX Gs2328pMLDSnoopingstatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pMLDSnoopingstatisticVLANID } ::= { gs2328pMLDSnoopingstatisticTable 1 } Gs2328pMLDSnoopingstatisticEntry ::= SEQUENCE { gs2328pMLDSnoopingstatisticVLANID Integer32, gs2328pMLDSnoopingstatisticQuerierVersion DisplayString, gs2328pMLDSnoopingstatisticHostVersion DisplayString, gs2328pMLDSnoopingstatisticQuerierStatus DisplayString, gs2328pMLDSnoopingstatisticQueriesTransmitted Counter32, gs2328pMLDSnoopingstatisticQueriesReceived Counter32, gs2328pMLDSnoopingstatisticV1ReportsReceived Counter32, gs2328pMLDSnoopingstatisticV2ReportsReceived Counter32, gs2328pMLDSnoopingstatisticV1LeavesReceived Counter32 } gs2328pMLDSnoopingstatisticVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID of the entry. " ::= { gs2328pMLDSnoopingstatisticEntry 1 } gs2328pMLDSnoopingstatisticQuerierVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Working Querier Version currently. " ::= { gs2328pMLDSnoopingstatisticEntry 2 } gs2328pMLDSnoopingstatisticHostVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Working Host Version currently. " ::= { gs2328pMLDSnoopingstatisticEntry 3 } gs2328pMLDSnoopingstatisticQuerierStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the Querier status is ACTIVE or IDLE. DISABLE denotes the specific interface is administratively disabled. " ::= { gs2328pMLDSnoopingstatisticEntry 4 } gs2328pMLDSnoopingstatisticQueriesTransmitted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Transmitted Queries. " ::= { gs2328pMLDSnoopingstatisticEntry 5 } gs2328pMLDSnoopingstatisticQueriesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received Queries. " ::= { gs2328pMLDSnoopingstatisticEntry 6 } gs2328pMLDSnoopingstatisticV1ReportsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V1 Reports. " ::= { gs2328pMLDSnoopingstatisticEntry 7 } gs2328pMLDSnoopingstatisticV2ReportsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V2 Reports. " ::= { gs2328pMLDSnoopingstatisticEntry 8 } gs2328pMLDSnoopingstatisticV1LeavesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V1 Leaves. " ::= { gs2328pMLDSnoopingstatisticEntry 9 } gs2328pMLDSnoopingRouterPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pMLDSnoopingRouterPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure Vlan Port Isolation Configuration. " ::= { gs2328pMLDSnoopingStatus 3 } gs2328pMLDSnoopingRouterPortEntry OBJECT-TYPE SYNTAX Gs2328pMLDSnoopingRouterPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex } ::= { gs2328pMLDSnoopingRouterPortTable 1 } Gs2328pMLDSnoopingRouterPortEntry ::= SEQUENCE { gs2328pMLDSnoopingRouterPortStatus DisplayString } gs2328pMLDSnoopingRouterPortStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Display which ports act as router ports. A router port is a port on the Ethernet switch that leads towards the Layer 3 multicast device or IGMP querier. Static denotes the specific port is configured to be a router port. Dynamic denotes the specific port is learnt to be a router port. Both denote the specific port is configured or learnt to be a router port. " ::= { gs2328pMLDSnoopingRouterPortEntry 1 } gs2328pMLDSnoopingGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pMLDSnoopingGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MLD Snooping Groups Information . " ::= { gs2328pMLDSnooping 5 } gs2328pMLDSnoopingGroupsEntry OBJECT-TYPE SYNTAX Gs2328pMLDSnoopingGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pMLDSnoopingGroupsIndex } ::= { gs2328pMLDSnoopingGroupsTable 1 } Gs2328pMLDSnoopingGroupsEntry ::= SEQUENCE { gs2328pMLDSnoopingGroupsIndex Integer32, gs2328pMLDSnoopingGroupsVLANID Integer32, gs2328pMLDSnoopingGroups InetAddress, gs2328pMLDSnoopingGroupsMemberships DisplayString } gs2328pMLDSnoopingGroupsIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MLD Snooping Groups Index" ::= { gs2328pMLDSnoopingGroupsEntry 1 } gs2328pMLDSnoopingGroupsVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN ID of the group. " ::= { gs2328pMLDSnoopingGroupsEntry 2 } gs2328pMLDSnoopingGroups OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Group address of the group displayed." ::= { gs2328pMLDSnoopingGroupsEntry 3 } gs2328pMLDSnoopingGroupsMemberships OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Ports under this group." ::= { gs2328pMLDSnoopingGroupsEntry 4 } gs2328pMLDSnoopingSSMTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pMLDSnoopingSSMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MLD SFM (Source-Filtered Multicast) Information Table also contains the SSM (Source-Specific Multicast) information. This table is sorted first by VLAN ID, then by group, and then by Port. Different source addresses belong to the same group are treated as single entry." ::= { gs2328pMLDSnooping 6 } gs2328pMLDSnoopingSSMEntry OBJECT-TYPE SYNTAX Gs2328pMLDSnoopingSSMEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pMLDSnoopingSSMIndex } ::= { gs2328pMLDSnoopingSSMTable 1 } Gs2328pMLDSnoopingSSMEntry ::= SEQUENCE { gs2328pMLDSnoopingSSMIndex Integer32, gs2328pMLDSnoopingSSMVLANID Integer32, gs2328pMLDSnoopingSSMGroup DisplayString, gs2328pMLDSnoopingSSMPort Integer32, gs2328pMLDSnoopingSSMMode DisplayString, gs2328pMLDSnoopingSSMSourceAddress DisplayString, gs2328pMLDSnoopingSSMType DisplayString } gs2328pMLDSnoopingSSMIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MLD Snooping SSM Index" ::= { gs2328pMLDSnoopingSSMEntry 1 } gs2328pMLDSnoopingSSMVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN ID of the group. " ::= { gs2328pMLDSnoopingSSMEntry 2 } gs2328pMLDSnoopingSSMGroup OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Group address of the group displayed." ::= { gs2328pMLDSnoopingSSMEntry 3 } gs2328pMLDSnoopingSSMPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Ports under this group." ::= { gs2328pMLDSnoopingSSMEntry 4 } gs2328pMLDSnoopingSSMMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the filtering mode maintained per (VLAN ID, port number, Group Address) basis. It can be either Include or Exclude." ::= { gs2328pMLDSnoopingSSMEntry 5 } gs2328pMLDSnoopingSSMSourceAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "IP Address of the source. Currently, system limits the total number of IP source addresses for filtering to be 128." ::= { gs2328pMLDSnoopingSSMEntry 6 } gs2328pMLDSnoopingSSMType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Type. It can be either Allow or Deny." ::= { gs2328pMLDSnoopingSSMEntry 7 } gs2328pMVR OBJECT IDENTIFIER ::= { gs2328pConfiguration 18 } gs2328pMVRConfiguration OBJECT IDENTIFIER ::= { gs2328pMVR 1 } gs2328pMVRMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the Global MVR. " ::= { gs2328pMVRConfiguration 1 } gs2328pMVRVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the Multicast VLAN ID. " ::= { gs2328pMVRConfiguration 2 } gs2328pMVRPortConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pMVRPortConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure MVR Port Configuration. " ::= { gs2328pMVRConfiguration 3 } gs2328pMVRPortConfigurationEntry OBJECT-TYPE SYNTAX Gs2328pMVRPortConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { ifIndex } ::= { gs2328pMVRPortConfigurationTable 1 } Gs2328pMVRPortConfigurationEntry ::= SEQUENCE { gs2328pMVRPortConfigurationMode INTEGER, gs2328pMVRPortConfigurationType INTEGER, gs2328pMVRPortConfigurationImmediateLeave INTEGER } gs2328pMVRPortConfigurationMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable MVR on the port. " ::= { gs2328pMVRPortConfigurationEntry 1 } gs2328pMVRPortConfigurationType OBJECT-TYPE SYNTAX INTEGER { receiver(0), source(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the MVR port type on the port. " ::= { gs2328pMVRPortConfigurationEntry 2 } gs2328pMVRPortConfigurationImmediateLeave OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the fast leave on the port. " ::= { gs2328pMVRPortConfigurationEntry 3 } gs2328pMVRPortGroupFiltering OBJECT IDENTIFIER ::= { gs2328pMVR 2 } gs2328pMVRPortGroupFilteringCreate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create MLD Snooping Port Group Filtering " ::= { gs2328pMVRPortGroupFiltering 1 } gs2328pMVRPortGroupFilteringTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pMVRPortGroupFilteringEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure MVR port group filtering. " ::= { gs2328pMVRPortGroupFiltering 2 } gs2328pMVRPortGroupFilteringEntry OBJECT-TYPE SYNTAX Gs2328pMVRPortGroupFilteringEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pMVRPortGroupFilteringIndex } ::= { gs2328pMVRPortGroupFilteringTable 1 } Gs2328pMVRPortGroupFilteringEntry ::= SEQUENCE { gs2328pMVRPortGroupFilteringIndex Integer32, gs2328pMVRPortGroupFilteringPort Integer32, gs2328pMVRPortGroupFilteringStartGroups DisplayString, gs2328pMVRPortGroupFilteringEndGroups DisplayString, gs2328pMVRPortGroupFilteringRowStatus INTEGER } gs2328pMVRPortGroupFilteringIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MVR Port Group Filtering Configuration Index. " ::= { gs2328pMVRPortGroupFilteringEntry 1 } gs2328pMVRPortGroupFilteringPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The logical port for the settings. " ::= { gs2328pMVRPortGroupFilteringEntry 2 } gs2328pMVRPortGroupFilteringStartGroups OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Group that will be allowed. " ::= { gs2328pMVRPortGroupFilteringEntry 3 } gs2328pMVRPortGroupFilteringEndGroups OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Multicast Group that will be allowed. " ::= { gs2328pMVRPortGroupFilteringEntry 4 } gs2328pMVRPortGroupFilteringRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy" ::= { gs2328pMVRPortGroupFilteringEntry 5 } gs2328pMVRGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pMVRGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MVR Groups Information . " ::= { gs2328pMVR 3 } gs2328pMVRGroupsEntry OBJECT-TYPE SYNTAX Gs2328pMVRGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pMVRGroupsIndex } ::= { gs2328pMVRGroupsTable 1 } Gs2328pMVRGroupsEntry ::= SEQUENCE { gs2328pMVRGroupsIndex Integer32, gs2328pMVRGroupsVLANID Integer32, gs2328pMVRGroups InetAddress, gs2328pMVRGroupsMemberships DisplayString } gs2328pMVRGroupsIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MVR Groups Index" ::= { gs2328pMVRGroupsEntry 1 } gs2328pMVRGroupsVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN ID of the group. " ::= { gs2328pMVRGroupsEntry 2 } gs2328pMVRGroups OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Group address of the group displayed." ::= { gs2328pMVRGroupsEntry 3 } gs2328pMVRGroupsMemberships OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Ports under this group." ::= { gs2328pMVRGroupsEntry 4 } gs2328pMVRStatus OBJECT IDENTIFIER ::= { gs2328pMVR 4 } gs2328pMVRstatisticClear OBJECT-TYPE SYNTAX INTEGER { none(0), clear(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "Clears all Statistics counters." ::= { gs2328pMVRStatus 1 } gs2328pMVRstatisticVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID of the entry. " ::= { gs2328pMVRStatus 2 } gs2328pMVRstatisticV1ReportsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V1 Reports. " ::= { gs2328pMVRStatus 3 } gs2328pMVRstatisticV2ReportsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V2 Reports. " ::= { gs2328pMVRStatus 4 } gs2328pMVRstatisticV3ReportsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V3 Reports. " ::= { gs2328pMVRStatus 5 } gs2328pMVRstatisticV2LeavesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Received V2 Leaves. " ::= { gs2328pMVRStatus 6 } gs2328pLACP OBJECT IDENTIFIER ::= { gs2328pConfiguration 19 } gs2328pLACPConf OBJECT IDENTIFIER ::= { gs2328pLACP 1 } gs2328pLACPPortConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pLACPPortConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pLACPConf 1 } gs2328pLACPPortConfigurationEntry OBJECT-TYPE SYNTAX Gs2328pLACPPortConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pLACPPortConfigurationPort } ::= { gs2328pLACPPortConfigurationTable 1 } Gs2328pLACPPortConfigurationEntry ::= SEQUENCE { gs2328pLACPPortConfigurationPort Integer32, gs2328pLACPPortConfigurationMode INTEGER, gs2328pLACPPortConfigurationKey Integer32, gs2328pLACPPortConfigurationRole INTEGER } gs2328pLACPPortConfigurationPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pLACPPortConfigurationEntry 1 } gs2328pLACPPortConfigurationMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable LACP Mode." ::= { gs2328pLACPPortConfigurationEntry 2 } gs2328pLACPPortConfigurationKey OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "LACP key : 1-65535. 0 : Auto" ::= { gs2328pLACPPortConfigurationEntry 3 } gs2328pLACPPortConfigurationRole OBJECT-TYPE SYNTAX INTEGER { passive(0), active(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0 : passive, Listen for LACP packets. 1 : active, Initiate LACP negotiation, and transmit LACP packets each second" ::= { gs2328pLACPPortConfigurationEntry 4 } gs2328pLACPSystemStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pLACPSystemStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pLACP 2 } gs2328pLACPSystemStatusEntry OBJECT-TYPE SYNTAX Gs2328pLACPSystemStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pLACPSystemStatusIndex } ::= { gs2328pLACPSystemStatusTable 1 } Gs2328pLACPSystemStatusEntry ::= SEQUENCE { gs2328pLACPSystemStatusIndex Integer32, gs2328pLACPSystemStatusAggrID DisplayString, gs2328pLACPSystemStatusPartnerSystemID MacAddress, gs2328pLACPSystemStatusPartnerKey DisplayString, gs2328pLACPSystemStatusLastchanged DisplayString, gs2328pLACPSystemStatusLocalPorts DisplayString } gs2328pLACPSystemStatusIndex OBJECT-TYPE SYNTAX Integer32(1..12) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pLACPSystemStatusEntry 1 } gs2328pLACPSystemStatusAggrID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Aggregation ID associated with this aggregation instance." ::= { gs2328pLACPSystemStatusEntry 2 } gs2328pLACPSystemStatusPartnerSystemID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The system ID (MAC address) of the aggregation partner." ::= { gs2328pLACPSystemStatusEntry 3 } gs2328pLACPSystemStatusPartnerKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Key that the partner has assigned to this aggregation ID. " ::= { gs2328pLACPSystemStatusEntry 4 } gs2328pLACPSystemStatusLastchanged OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The time since this aggregation changed. " ::= { gs2328pLACPSystemStatusEntry 5 } gs2328pLACPSystemStatusLocalPorts OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Shows which ports are a part of this aggregation for this switch. " ::= { gs2328pLACPSystemStatusEntry 6 } gs2328pLACPStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pLACPStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pLACP 3 } gs2328pLACPStatusEntry OBJECT-TYPE SYNTAX Gs2328pLACPStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pLACPStatusPort } ::= { gs2328pLACPStatusTable 1 } Gs2328pLACPStatusEntry ::= SEQUENCE { gs2328pLACPStatusPort Integer32, gs2328pLACPStatusLACP DisplayString, gs2328pLACPStatusKey DisplayString, gs2328pLACPStatusAggrID DisplayString, gs2328pLACPStatusPartnerSystemID DisplayString, gs2328pLACPStatusPartnerPort DisplayString } gs2328pLACPStatusPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pLACPStatusEntry 1 } gs2328pLACPStatusLACP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Enabled means that LACP is enabled and the port link is up. Disabled means that LACP is not enabled or that the port link is down. Backup means that the port could not join the aggregation group but will join if other port leaves. Meanwhile it's LACP status is disabled." ::= { gs2328pLACPStatusEntry 2 } gs2328pLACPStatusKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The key assigned to this port. Only ports with the same key can aggregate together." ::= { gs2328pLACPStatusEntry 3 } gs2328pLACPStatusAggrID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Aggregation ID assigned to this aggregation group. " ::= { gs2328pLACPStatusEntry 4 } gs2328pLACPStatusPartnerSystemID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The partner's System ID. " ::= { gs2328pLACPStatusEntry 5 } gs2328pLACPStatusPartnerPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The partner's port number connected to this port. " ::= { gs2328pLACPStatusEntry 6 } gs2328pLACPStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pLACPStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pLACP 4 } gs2328pLACPStatisticsEntry OBJECT-TYPE SYNTAX Gs2328pLACPStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pLACPStatisticsPort } ::= { gs2328pLACPStatisticsTable 1 } Gs2328pLACPStatisticsEntry ::= SEQUENCE { gs2328pLACPStatisticsPort Integer32, gs2328pLACPReceived Counter32, gs2328pLACPTransmitted Counter32, gs2328pLACPDiscardedUnknown Counter32, gs2328pLACPDiscardedIllegal Counter32 } gs2328pLACPStatisticsPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pLACPStatisticsEntry 1 } gs2328pLACPReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows how many LACP frames have been received at each port. " ::= { gs2328pLACPStatisticsEntry 2 } gs2328pLACPTransmitted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Shows how many LACP frames have been sent from each port. " ::= { gs2328pLACPStatisticsEntry 3 } gs2328pLACPDiscardedUnknown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Shows how many unknown LACP frames have been discarded at each port. " ::= { gs2328pLACPStatisticsEntry 4 } gs2328pLACPDiscardedIllegal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " Shows how many illegal LACP frames have been discarded at each port. " ::= { gs2328pLACPStatisticsEntry 5 } gs2328pLACPStatisticsClear OBJECT-TYPE SYNTAX INTEGER { none(0), clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: clear" ::= { gs2328pLACP 5 } ---------------------------------------------------------------------------------------------------------------------------- gs2328pSecurity OBJECT IDENTIFIER ::= { lancomGS2328P 3 } gs2328pIPSourceGuard OBJECT IDENTIFIER ::= { gs2328pSecurity 1 } gs2328pIPSourceGuardConf OBJECT IDENTIFIER ::= { gs2328pIPSourceGuard 1 } gs2328pIPSourceGuardMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " default: 0 0: disable 1: enable" ::= { gs2328pIPSourceGuardConf 1 } gs2328pIPSourceGuardPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PIPSourceGuardPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pIPSourceGuardConf 2 } gs2328pIPSourceGuardPortConfigEntry OBJECT-TYPE SYNTAX GS2328PIPSourceGuardPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pIPSourceGuardPortConfigPort } ::= { gs2328pIPSourceGuardPortConfigTable 1 } GS2328PIPSourceGuardPortConfigEntry ::= SEQUENCE { gs2328pIPSourceGuardPortConfigPort Integer32, gs2328pIPSourceGuardPortConfigMode INTEGER, gs2328pIPSourceGuardPortMaxDynamicClients Integer32 } gs2328pIPSourceGuardPortConfigPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pIPSourceGuardPortConfigEntry 1 } gs2328pIPSourceGuardPortConfigMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:disable 1:enable " ::= { gs2328pIPSourceGuardPortConfigEntry 2 } gs2328pIPSourceGuardPortMaxDynamicClients OBJECT-TYPE SYNTAX Integer32(0..2|99) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 99 0~2: Max Dynamic clients 99:Unlimited " ::= { gs2328pIPSourceGuardPortConfigEntry 3 } gs2328pIPSourceGuardStatic OBJECT IDENTIFIER ::= { gs2328pIPSourceGuard 2 } gs2328pIPSourceGuardStaticCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create a IP Source Guard" ::= { gs2328pIPSourceGuardStatic 1 } gs2328pIPSourceGuardStaticTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PIPSourceGuardStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pIPSourceGuardStatic 2 } gs2328pIPSourceGuardStaticEntry OBJECT-TYPE SYNTAX GS2328PIPSourceGuardStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pIPSourceGuardStaticIndex } ::= { gs2328pIPSourceGuardStaticTable 1 } GS2328PIPSourceGuardStaticEntry ::= SEQUENCE { gs2328pIPSourceGuardStaticIndex Integer32, gs2328pIPSourceGuardStaticPort Integer32, gs2328pIPSourceGuardStaticVLANId Integer32, gs2328pIPSourceGuardStaticIPAddress IpAddress, gs2328pIPSourceGuardStaticMACAddress MacAddress, gs2328pIPSourceGuardStaticRowStatus INTEGER } gs2328pIPSourceGuardStaticIndex OBJECT-TYPE SYNTAX Integer32(1..28) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pIPSourceGuardStaticEntry 1 } gs2328pIPSourceGuardStaticPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION " Port, range: 1 - port number. " ::= { gs2328pIPSourceGuardStaticEntry 2 } gs2328pIPSourceGuardStaticVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN ID, range: 1 - 4094. " ::= { gs2328pIPSourceGuardStaticEntry 3 } gs2328pIPSourceGuardStaticIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " IP address allowed for doing IP source guard. " ::= { gs2328pIPSourceGuardStaticEntry 4 } gs2328pIPSourceGuardStaticMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION " Allowed Source MAC address, format 0a 1b 2c 3d 4e 5f " ::= { gs2328pIPSourceGuardStaticEntry 5 } gs2328pIPSourceGuardStaticRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), edit(3), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 3: edit 4: destroy 5: undo" ::= { gs2328pIPSourceGuardStaticEntry 6 } gs2328pIPSourceGuardDynamicTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PIPSourceGuardDynamicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pIPSourceGuard 3 } gs2328pIPSourceGuardDynamicEntry OBJECT-TYPE SYNTAX GS2328PIPSourceGuardDynamicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pIPSourceGuardDynamicIndex } ::= { gs2328pIPSourceGuardDynamicTable 1 } GS2328PIPSourceGuardDynamicEntry ::= SEQUENCE { gs2328pIPSourceGuardDynamicIndex Integer32, gs2328pIPSourceGuardDynamicPort Integer32, gs2328pIPSourceGuardDynamicVLANId Integer32, gs2328pIPSourceGuardDynamicIPAddress IpAddress, gs2328pIPSourceGuardDynamicMACAddress MacAddress } gs2328pIPSourceGuardDynamicIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pIPSourceGuardDynamicEntry 1 } gs2328pIPSourceGuardDynamicPort OBJECT-TYPE SYNTAX Integer32(1..10) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pIPSourceGuardDynamicEntry 2 } gs2328pIPSourceGuardDynamicVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pIPSourceGuardDynamicEntry 3 } gs2328pIPSourceGuardDynamicIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pIPSourceGuardDynamicEntry 4 } gs2328pIPSourceGuardDynamicMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pIPSourceGuardDynamicEntry 5 } gs2328pARPInspection OBJECT IDENTIFIER ::= { gs2328pSecurity 2 } gs2328pARPInspectionConf OBJECT IDENTIFIER ::= { gs2328pARPInspection 1 } gs2328pARPInspectionConfMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable" ::= { gs2328pARPInspectionConf 1 } gs2328pARPInspectionConfTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PARPInspectionConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pARPInspectionConf 2 } gs2328pARPInspectionConfEntry OBJECT-TYPE SYNTAX GS2328PARPInspectionConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pARPInspectionConfPortIndex } ::= { gs2328pARPInspectionConfTable 1 } GS2328PARPInspectionConfEntry ::= SEQUENCE { gs2328pARPInspectionConfPortIndex Integer32, gs2328pARPInspectionConfPortMode INTEGER } gs2328pARPInspectionConfPortIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pARPInspectionConfEntry 1 } gs2328pARPInspectionConfPortMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable" ::= { gs2328pARPInspectionConfEntry 2 } gs2328pARPInspectionStatic OBJECT IDENTIFIER ::= { gs2328pARPInspection 2 } gs2328pARPInspectionStaticCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: create" ::= { gs2328pARPInspectionStatic 1 } gs2328pARPInspectionStaticTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PARPInspectionStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pARPInspectionStatic 2 } gs2328pARPInspectionStaticEntry OBJECT-TYPE SYNTAX GS2328PARPInspectionStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pARPInspectionStaticIndex } ::= { gs2328pARPInspectionStaticTable 1 } GS2328PARPInspectionStaticEntry ::= SEQUENCE { gs2328pARPInspectionStaticIndex Integer32, gs2328pARPInspectionStaticPort Integer32, gs2328pARPInspectionStaticVLANId Integer32, gs2328pARPInspectionStaticIPAddress IpAddress, gs2328pARPInspectionStaticMACAddress MacAddress, gs2328pARPInspectionStaticRowStatus INTEGER } gs2328pARPInspectionStaticIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { gs2328pARPInspectionStaticEntry 1 } gs2328pARPInspectionStaticPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION " Port, range: 1 - port number. " ::= { gs2328pARPInspectionStaticEntry 2 } gs2328pARPInspectionStaticVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN ID, range: 1 - 4094. " ::= { gs2328pARPInspectionStaticEntry 3 } gs2328pARPInspectionStaticIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " IP address allowed for doing ARP request. " ::= { gs2328pARPInspectionStaticEntry 4 } gs2328pARPInspectionStaticMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION " Allowed Source MAC address in ARP request packets, format 0a 1b 2c 3d 4e 5f " ::= { gs2328pARPInspectionStaticEntry 5 } gs2328pARPInspectionStaticRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), edit(3), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 3: edit 4: destroy 5: undo" ::= { gs2328pARPInspectionStaticEntry 6 } gs2328pARPInspectionDynamicTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PARPInspectionDynamicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pARPInspection 3 } gs2328pARPInspectionDynamicEntry OBJECT-TYPE SYNTAX GS2328PARPInspectionDynamicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pARPInspectionDynamicIndex } ::= { gs2328pARPInspectionDynamicTable 1 } GS2328PARPInspectionDynamicEntry ::= SEQUENCE { gs2328pARPInspectionDynamicIndex Integer32, gs2328pARPInspectionDynamicPort Integer32, gs2328pARPInspectionDynamicVLANId Integer32, gs2328pARPInspectionDynamicIPAddress IpAddress, gs2328pARPInspectionDynamicMACAddress MacAddress } gs2328pARPInspectionDynamicIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pARPInspectionDynamicEntry 1 } gs2328pARPInspectionDynamicPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pARPInspectionDynamicEntry 2 } gs2328pARPInspectionDynamicVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pARPInspectionDynamicEntry 3 } gs2328pARPInspectionDynamicIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pARPInspectionDynamicEntry 4 } gs2328pARPInspectionDynamicMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pARPInspectionDynamicEntry 5 } gs2328pARPStaticGatewayCtrl OBJECT IDENTIFIER ::= { gs2328pARPInspection 6 } gs2328pARPStaticGatewayCtrlSystemConf OBJECT IDENTIFIER ::= { gs2328pARPStaticGatewayCtrl 1 } gs2328pARPStaticGatewayCtrlMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2328pARPStaticGatewayCtrlSystemConf 1 } gs2328pARPStaticGatewayCtrlCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: create" ::= { gs2328pARPStaticGatewayCtrl 2 } gs2328pARPStaticGatewayCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PARPStaticGatewayCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pARPStaticGatewayCtrl 3 } gs2328pARPStaticGatewayCtrlEntry OBJECT-TYPE SYNTAX GS2328PARPStaticGatewayCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pARPStaticGatewayCtrlIndex } ::= { gs2328pARPStaticGatewayCtrlTable 1 } GS2328PARPStaticGatewayCtrlEntry ::= SEQUENCE { gs2328pARPStaticGatewayCtrlIndex Integer32, gs2328pARPStaticGatewayCtrlIPAddress IpAddress, gs2328pARPStaticGatewayCtrlMACAddress MacAddress, gs2328pARPStaticGatewayCtrlPort Integer32, gs2328pARPStaticGatewayCtrlAction INTEGER, gs2328pARPStaticGatewayCtrlState DisplayString, gs2328pARPStaticGatewayCtrlReOpen INTEGER, gs2328pARPStaticGatewayCtrlRowStatus INTEGER } gs2328pARPStaticGatewayCtrlIndex OBJECT-TYPE SYNTAX Integer32(1..4) MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { gs2328pARPStaticGatewayCtrlEntry 1 } gs2328pARPStaticGatewayCtrlIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " Source IP address. " ::= { gs2328pARPStaticGatewayCtrlEntry 2 } gs2328pARPStaticGatewayCtrlMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION " Source MAC address , format 0a 1b 2c 3d 4e 5f " ::= { gs2328pARPStaticGatewayCtrlEntry 3 } gs2328pARPStaticGatewayCtrlPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION " Port, range: 1 - port number. " ::= { gs2328pARPStaticGatewayCtrlEntry 4 } gs2328pARPStaticGatewayCtrlAction OBJECT-TYPE SYNTAX INTEGER {none(0),trap(1),dropAndTrap(2), shutdown(3), trapAndShutdown(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: trap 2: drop&trap 3: shutdown 4: trap&shutdown" ::= { gs2328pARPStaticGatewayCtrlEntry 5 } gs2328pARPStaticGatewayCtrlState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pARPStaticGatewayCtrlEntry 6 } gs2328pARPStaticGatewayCtrlReOpen OBJECT-TYPE SYNTAX INTEGER { none(0), reopen(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: reopen" ::= { gs2328pARPStaticGatewayCtrlEntry 7 } gs2328pARPStaticGatewayCtrlRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), edit(3), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 3: edit 4: destroy 5: undo" ::= { gs2328pARPStaticGatewayCtrlEntry 8 } gs2328pARPSpoofingPrevention OBJECT IDENTIFIER ::= { gs2328pARPInspection 7 } gs2328pARPSpoofingPreventionSystemConf OBJECT IDENTIFIER ::= { gs2328pARPSpoofingPrevention 1 } gs2328pARPSpoofingPreventionMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2328pARPSpoofingPreventionSystemConf 1 } gs2328pARPSpoofingPreventionTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PARPSpoofingPreventionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pARPSpoofingPrevention 2 } gs2328pARPSpoofingPreventionEntry OBJECT-TYPE SYNTAX GS2328PARPSpoofingPreventionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pARPSpoofingPreventionPort } ::= { gs2328pARPSpoofingPreventionTable 1 } GS2328PARPSpoofingPreventionEntry ::= SEQUENCE { gs2328pARPSpoofingPreventionPort Integer32, gs2328pARPSpoofingPreventionPortMode INTEGER, gs2328pARPSpoofingPreventionPortLimit Integer32, gs2328pARPSpoofingPreventionPortAction INTEGER, gs2328pARPSpoofingPreventionPortState DisplayString, gs2328pARPSpoofingPreventionPortReOpen INTEGER } gs2328pARPSpoofingPreventionPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pARPSpoofingPreventionEntry 1 } gs2328pARPSpoofingPreventionPortMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable" ::= { gs2328pARPSpoofingPreventionEntry 2 } gs2328pARPSpoofingPreventionPortLimit OBJECT-TYPE SYNTAX Integer32(1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1, range: 1-100" ::= { gs2328pARPSpoofingPreventionEntry 3 } gs2328pARPSpoofingPreventionPortAction OBJECT-TYPE SYNTAX INTEGER { none(0), trap(1), dropAndTrap(2), shutdown(3), trapAndShutdown(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: trap 2: drop&trap 3: shutdown 4: trap&shutdown" ::= { gs2328pARPSpoofingPreventionEntry 4 } gs2328pARPSpoofingPreventionPortState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pARPSpoofingPreventionEntry 5 } gs2328pARPSpoofingPreventionPortReOpen OBJECT-TYPE SYNTAX INTEGER { none(0), reopen(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: reopen" ::= { gs2328pARPSpoofingPreventionEntry 6 } gs2328pARPIPDoSPrevention OBJECT IDENTIFIER ::= { gs2328pARPInspection 8 } gs2328pARPIPDoSPreventionTCPMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2328pARPIPDoSPrevention 1 } gs2328pARPIPDoSPreventionUDPMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2328pARPIPDoSPrevention 2 } gs2328pARPIPDoSPreventionICMPMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2328pARPIPDoSPrevention 3 } gs2328pARPIPDoSPreventionServerPort1 OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " Port, range: 0 - port number. 0: none. " ::= { gs2328pARPIPDoSPrevention 4 } gs2328pARPIPDoSPreventionServerPort2 OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " Port, range: 0 - port number. 0: none. " ::= { gs2328pARPIPDoSPrevention 5 } gs2328pARPIPDoSPreventionServerPort3 OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " Port, range: 0 - port number. 0: none. " ::= { gs2328pARPIPDoSPrevention 6 } gs2328pARPIPDoSPreventionServerPort4 OBJECT-TYPE SYNTAX Integer32(0..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " Port, range: 0 - port number. 0: none. " ::= { gs2328pARPIPDoSPrevention 7 } gs2328pDHCPSnooping OBJECT IDENTIFIER ::= { gs2328pSecurity 3 } gs2328pDHCPSnoopingConf OBJECT IDENTIFIER ::= { gs2328pDHCPSnooping 1 } gs2328pDHCPSnoopingMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable" ::= { gs2328pDHCPSnoopingConf 1 } gs2328pDHCPSnoopingPortModeConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PDHCPSnoopingPortModeConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingConf 2 } gs2328pDHCPSnoopingPortModeConfigurationEntry OBJECT-TYPE SYNTAX GS2328PDHCPSnoopingPortModeConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pDHCPSnoopingPortModeConfigurationPort } ::= { gs2328pDHCPSnoopingPortModeConfigurationTable 1 } GS2328PDHCPSnoopingPortModeConfigurationEntry ::= SEQUENCE { gs2328pDHCPSnoopingPortModeConfigurationPort Integer32, gs2328pDHCPSnoopingPortModeConfigurationMode INTEGER } gs2328pDHCPSnoopingPortModeConfigurationPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingPortModeConfigurationEntry 1 } gs2328pDHCPSnoopingPortModeConfigurationMode OBJECT-TYPE SYNTAX INTEGER { trust(0), untrust(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: trust port mode 1: untrust port mode" ::= { gs2328pDHCPSnoopingPortModeConfigurationEntry 2 } gs2328pDHCPSnoopingStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PDHCPSnoopingStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnooping 2 } gs2328pDHCPSnoopingStatisticsEntry OBJECT-TYPE SYNTAX GS2328PDHCPSnoopingStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pDHCPSnoopingStatisticsPort } ::= { gs2328pDHCPSnoopingStatisticsTable 1 } GS2328PDHCPSnoopingStatisticsEntry ::= SEQUENCE { gs2328pDHCPSnoopingStatisticsPort Integer32, gs2328pDHCPSnoopingStatisticsClear INTEGER, gs2328pDHCPSnoopingRxDiscover Counter32, gs2328pDHCPSnoopingRxOffer Counter32, gs2328pDHCPSnoopingRxRequest Counter32, gs2328pDHCPSnoopingRxDecline Counter32, gs2328pDHCPSnoopingRxACK Counter32, gs2328pDHCPSnoopingRxNAK Counter32, gs2328pDHCPSnoopingRxRelease Counter32, gs2328pDHCPSnoopingRxInform Counter32, gs2328pDHCPSnoopingRxLeaseQuery Counter32, gs2328pDHCPSnoopingRxLeaseUnassigned Counter32, gs2328pDHCPSnoopingRxLeaseUnknown Counter32, gs2328pDHCPSnoopingRxLeaseActive Counter32, gs2328pDHCPSnoopingTxDiscover Counter32, gs2328pDHCPSnoopingTxOffer Counter32, gs2328pDHCPSnoopingTxRequest Counter32, gs2328pDHCPSnoopingTxDecline Counter32, gs2328pDHCPSnoopingTxACK Counter32, gs2328pDHCPSnoopingTxNAK Counter32, gs2328pDHCPSnoopingTxRelease Counter32, gs2328pDHCPSnoopingTxInform Counter32, gs2328pDHCPSnoopingTxLeaseQuery Counter32, gs2328pDHCPSnoopingTxLeaseUnassigned Counter32, gs2328pDHCPSnoopingTxLeaseUnknown Counter32, gs2328pDHCPSnoopingTxLeaseActive Counter32 } gs2328pDHCPSnoopingStatisticsPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 1 } gs2328pDHCPSnoopingStatisticsClear OBJECT-TYPE SYNTAX INTEGER { none(0), clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: clear" ::= { gs2328pDHCPSnoopingStatisticsEntry 2 } gs2328pDHCPSnoopingRxDiscover OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 3 } gs2328pDHCPSnoopingRxOffer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 4 } gs2328pDHCPSnoopingRxRequest OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 5 } gs2328pDHCPSnoopingRxDecline OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 6 } gs2328pDHCPSnoopingRxACK OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 7 } gs2328pDHCPSnoopingRxNAK OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 8 } gs2328pDHCPSnoopingRxRelease OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 9 } gs2328pDHCPSnoopingRxInform OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 10 } gs2328pDHCPSnoopingRxLeaseQuery OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 11 } gs2328pDHCPSnoopingRxLeaseUnassigned OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 12 } gs2328pDHCPSnoopingRxLeaseUnknown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 13 } gs2328pDHCPSnoopingRxLeaseActive OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 14 } gs2328pDHCPSnoopingTxDiscover OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 15 } gs2328pDHCPSnoopingTxOffer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 16 } gs2328pDHCPSnoopingTxRequest OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 17 } gs2328pDHCPSnoopingTxDecline OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 18 } gs2328pDHCPSnoopingTxACK OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 19 } gs2328pDHCPSnoopingTxNAK OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 20 } gs2328pDHCPSnoopingTxRelease OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 21 } gs2328pDHCPSnoopingTxInform OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 22 } gs2328pDHCPSnoopingTxLeaseQuery OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 23 } gs2328pDHCPSnoopingTxLeaseUnassigned OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 24 } gs2328pDHCPSnoopingTxLeaseUnknown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 25 } gs2328pDHCPSnoopingTxLeaseActive OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPSnoopingStatisticsEntry 26 } gs2328pDHCPRelay OBJECT IDENTIFIER ::= { gs2328pSecurity 4 } gs2328pDHCPRelayConfiguration OBJECT IDENTIFIER ::= { gs2328pDHCPRelay 1 } gs2328pDHCPRelayMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable We need at least one server" ::= { gs2328pDHCPRelayConfiguration 1 } gs2328pDHCPRelayServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { gs2328pDHCPRelayConfiguration 2 } gs2328pDHCPRelayInformationMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2328pDHCPRelayConfiguration 3 } gs2328pDHCPRelayInformationPolicy OBJECT-TYPE SYNTAX INTEGER { replace(0), keep(1), drop(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: replace 1: keep 2: drop " ::= { gs2328pDHCPRelayConfiguration 4 } gs2328pDHCPRelayConfigurationGateways OBJECT IDENTIFIER ::= { gs2328pDHCPRelayConfiguration 5 } gs2328pDHCPRelayConfigurationGatewaysCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create entry" ::= { gs2328pDHCPRelayConfigurationGateways 1 } gs2328pDHCPRelayConfigurationGatewaysTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pDHCPRelayConfigurationGatewaysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Create DHCP Relay Gateway IP address entry." ::= { gs2328pDHCPRelayConfigurationGateways 2 } gs2328pDHCPRelayConfigurationGatewaysEntry OBJECT-TYPE SYNTAX Gs2328pDHCPRelayConfigurationGatewaysEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pDHCPRelayConfigurationGatewaysIndex } ::= { gs2328pDHCPRelayConfigurationGatewaysTable 1 } Gs2328pDHCPRelayConfigurationGatewaysEntry ::= SEQUENCE { gs2328pDHCPRelayConfigurationGatewaysIndex Integer32, gs2328pDHCPRelayConfigurationGatewaysVLANId Integer32, gs2328pDHCPRelayConfigurationGatewaysIP IpAddress, gs2328pDHCPRelayConfigurationGatewaysRowStatus INTEGER } gs2328pDHCPRelayConfigurationGatewaysIndex OBJECT-TYPE SYNTAX Integer32(1..6) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pDHCPRelayConfigurationGatewaysEntry 1 } gs2328pDHCPRelayConfigurationGatewaysVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN ID " ::= { gs2328pDHCPRelayConfigurationGatewaysEntry 2 } gs2328pDHCPRelayConfigurationGatewaysIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP GIADDR address." ::= { gs2328pDHCPRelayConfigurationGatewaysEntry 3 } gs2328pDHCPRelayConfigurationGatewaysRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy 5: undo" ::= { gs2328pDHCPRelayConfigurationGatewaysEntry 4 } gs2328pDHCPRelayStatistics OBJECT IDENTIFIER ::= { gs2328pDHCPRelay 2 } gs2328pDHCPRelayServerStatistics OBJECT IDENTIFIER ::= { gs2328pDHCPRelayStatistics 1 } gs2328pServerStatTransmitToServer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPRelayServerStatistics 1 } gs2328pServerStatTransmitError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPRelayServerStatistics 2 } gs2328pServerStatReceiveFromServer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPRelayServerStatistics 3 } gs2328pServerStatReceiveMissingAgentOption OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPRelayServerStatistics 4 } gs2328pServerStatReceiveMissingCircuitID OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPRelayServerStatistics 5 } gs2328pServerStatReceiveMissingRemoteID OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPRelayServerStatistics 6 } gs2328pServerStatReceiveBadCircuitID OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPRelayServerStatistics 7 } gs2328pServerStatReceiveBadRemoteID OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPRelayServerStatistics 8 } gs2328pDHCPRelayClientStatistics OBJECT IDENTIFIER ::= { gs2328pDHCPRelayStatistics 2 } gs2328pClientStatTransmitToClient OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPRelayClientStatistics 1 } gs2328pClientStatTransmitError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPRelayClientStatistics 2 } gs2328pClientStatReceivefromClient OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPRelayClientStatistics 3 } gs2328pClientStatReceiveAgentOption OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPRelayClientStatistics 4 } gs2328pClientStatReplaceAgentOption OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPRelayClientStatistics 5 } gs2328pClientStatKeepAgentOption OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPRelayClientStatistics 6 } gs2328pClientStatDropAgentOption OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pDHCPRelayClientStatistics 7 } gs2328pPortSecurity OBJECT IDENTIFIER ::= { gs2328pSecurity 5 } gs2328pPortSecLimitCtrl OBJECT IDENTIFIER ::= { gs2328pPortSecurity 1 } gs2328pPortSecLimitCtrlSystemConf OBJECT IDENTIFIER ::= { gs2328pPortSecLimitCtrl 1 } gs2328pPortSecurityMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2328pPortSecLimitCtrlSystemConf 1 } gs2328pPortSecurityAging OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2328pPortSecLimitCtrlSystemConf 2 } gs2328pPortSecurityAgingPeriod OBJECT-TYPE SYNTAX INTEGER(10..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 3600, range: 10-10000000 " ::= { gs2328pPortSecLimitCtrlSystemConf 3 } gs2328pPortSecLimitCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PPortSecLimitCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pPortSecLimitCtrl 2 } gs2328pPortSecLimitCtrlEntry OBJECT-TYPE SYNTAX GS2328PPortSecLimitCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pPortSecLimitCtrlPort } ::= { gs2328pPortSecLimitCtrlTable 1 } GS2328PPortSecLimitCtrlEntry ::= SEQUENCE { gs2328pPortSecLimitCtrlPort Integer32, gs2328pPortSecLimitCtrlPortMode INTEGER, gs2328pPortSecLimitCtrlPortLimit Integer32, gs2328pPortSecLimitCtrlPortAction INTEGER, gs2328pPortSecLimitCtrlPortState DisplayString, gs2328pPortSecLimitCtrlPortReOpen INTEGER } gs2328pPortSecLimitCtrlPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pPortSecLimitCtrlEntry 1 } gs2328pPortSecLimitCtrlPortMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable" ::= { gs2328pPortSecLimitCtrlEntry 2 } gs2328pPortSecLimitCtrlPortLimit OBJECT-TYPE SYNTAX Integer32(1..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 4, range: 1-1024" ::= { gs2328pPortSecLimitCtrlEntry 3 } gs2328pPortSecLimitCtrlPortAction OBJECT-TYPE SYNTAX INTEGER { none(0), trap(1), shutdown(2), trapShutdown(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: trap 2: shutdown 3: trap&shutdown" ::= { gs2328pPortSecLimitCtrlEntry 4 } gs2328pPortSecLimitCtrlPortState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pPortSecLimitCtrlEntry 5 } gs2328pPortSecLimitCtrlPortReOpen OBJECT-TYPE SYNTAX INTEGER { none(0), reopen(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: reopen" ::= { gs2328pPortSecLimitCtrlEntry 6 } gs2328pPortSecSwitchStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PPortSecSwitchStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pPortSecurity 2 } gs2328pPortSecSwitchStatusEntry OBJECT-TYPE SYNTAX GS2328PPortSecSwitchStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pPortSecSwitchStatusPort } ::= { gs2328pPortSecSwitchStatusTable 1 } GS2328PPortSecSwitchStatusEntry ::= SEQUENCE { gs2328pPortSecSwitchStatusPort Integer32, gs2328pPortSecSwitchStatusUsers DisplayString, gs2328pPortSecSwitchStatusState DisplayString, gs2328pPortSecSwitchStatusMACCountCurrent Integer32, gs2328pPortSecSwitchStatusMACCountLimit Integer32 } gs2328pPortSecSwitchStatusPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pPortSecSwitchStatusEntry 1 } gs2328pPortSecSwitchStatusUsers OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Users Abbr: L = Limit Control, 8 = 802.1X, D = DHCP Snooping, V = Voice VLAN, '-' means that the corresponding user module is not enabled. " ::= { gs2328pPortSecSwitchStatusEntry 2 } gs2328pPortSecSwitchStatusState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Shows the current state of the port : Disabled, Ready, Limit Reached, Shutdown. " ::= { gs2328pPortSecSwitchStatusEntry 3 } gs2328pPortSecSwitchStatusMACCountCurrent OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pPortSecSwitchStatusEntry 4 } gs2328pPortSecSwitchStatusMACCountLimit OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { gs2328pPortSecSwitchStatusEntry 5 } gs2328pPortSecPortStatus OBJECT IDENTIFIER ::= { gs2328pPortSecurity 3 } gs2328pPortSecPortStatusPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "port number default: 1 range: 1 - port number." ::= { gs2328pPortSecPortStatus 1 } gs2328pPortSecPortStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PPortSecPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pPortSecPortStatus 2 } gs2328pPortSecPortStatusEntry OBJECT-TYPE SYNTAX GS2328PPortSecPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pPortSecPortStatusIndex } ::= { gs2328pPortSecPortStatusTable 1 } GS2328PPortSecPortStatusEntry ::= SEQUENCE { gs2328pPortSecPortStatusIndex Integer32, gs2328pPortSecPortStatusMACAddress MacAddress, gs2328pPortSecPortStatusVLANId Integer32, gs2328pPortSecPortStatusState DisplayString, gs2328pPortSecPortStatusTimeOfAddition DisplayString, gs2328pPortSecPortStatusAgeAndHold DisplayString } gs2328pPortSecPortStatusIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pPortSecPortStatusEntry 1 } gs2328pPortSecPortStatusMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortSecPortStatusEntry 2 } gs2328pPortSecPortStatusVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortSecPortStatusEntry 3 } gs2328pPortSecPortStatusState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Blocked / Forwarding " ::= { gs2328pPortSecPortStatusEntry 4 } gs2328pPortSecPortStatusTimeOfAddition OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortSecPortStatusEntry 5 } gs2328pPortSecPortStatusAgeAndHold OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pPortSecPortStatusEntry 6 } gs2328pAccessManagement OBJECT IDENTIFIER ::= { gs2328pSecurity 6 } gs2328pAccessMgtConf OBJECT IDENTIFIER ::= { gs2328pAccessManagement 1 } gs2328pAccessMgtConfMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2328pAccessMgtConf 1 } gs2328pAccessMgtConfCreate OBJECT-TYPE SYNTAX INTEGER { none(0), create(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: create " ::= { gs2328pAccessMgtConf 2 } gs2328pAccessMgtConfTable OBJECT-TYPE SYNTAX SEQUENCE OF GS2328PAccessMgtConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pAccessMgtConf 3 } gs2328pAccessMgtConfEntry OBJECT-TYPE SYNTAX GS2328PAccessMgtConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pAccessMgtIndex } ::= { gs2328pAccessMgtConfTable 1 } GS2328PAccessMgtConfEntry ::= SEQUENCE { gs2328pAccessMgtIndex Integer32, gs2328pAccessMgtAddresstype INTEGER, gs2328pAccessMgtStartIpAddress DisplayString, gs2328pAccessMgtEndIpAddress DisplayString, gs2328pAccessMgtHttpHttps INTEGER, gs2328pAccessMgtSNMP INTEGER, gs2328pAccessMgtTelnetSSH INTEGER, gs2328pAccessMgtRowStatus INTEGER } gs2328pAccessMgtIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Set Access Management config index range : 1-16." ::= { gs2328pAccessMgtConfEntry 1 } gs2328pAccessMgtAddresstype OBJECT-TYPE SYNTAX INTEGER { ipv4(0), ipv6(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0: ipv4 1: ipv6 " ::= { gs2328pAccessMgtConfEntry 2 } gs2328pAccessMgtStartIpAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Start IP address. IP address doesn't allowed all zero or all 'ff'H." ::= { gs2328pAccessMgtConfEntry 3 } gs2328pAccessMgtEndIpAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " End IP address. IP address doesn't allowed all zero or all 'ff'H. End ip address is not less than start ip address." ::= { gs2328pAccessMgtConfEntry 4 } gs2328pAccessMgtHttpHttps OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2328pAccessMgtConfEntry 5 } gs2328pAccessMgtSNMP OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2328pAccessMgtConfEntry 6 } gs2328pAccessMgtTelnetSSH OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { gs2328pAccessMgtConfEntry 7 } gs2328pAccessMgtRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1), notInservice(2), edit(3),destroy(4), undo(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 3: edit 4: destroy 5: undo" ::= { gs2328pAccessMgtConfEntry 8 } gs2328pAccessMgtStatistics OBJECT IDENTIFIER ::= { gs2328pAccessManagement 2 } gs2328pHttpReceivedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pAccessMgtStatistics 1 } gs2328pHttpAllowedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pAccessMgtStatistics 2 } gs2328pHttpDiscardedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pAccessMgtStatistics 3 } gs2328pHttpsReceivedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pAccessMgtStatistics 4 } gs2328pHttpsAllowedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pAccessMgtStatistics 5 } gs2328pHttpsDiscardedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pAccessMgtStatistics 6 } gs2328pSnmpReceivedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pAccessMgtStatistics 7 } gs2328pSnmpAllowedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pAccessMgtStatistics 8 } gs2328pSnmpDiscardedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pAccessMgtStatistics 9 } gs2328pTelnetReceivedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pAccessMgtStatistics 10 } gs2328pTelnetAllowedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pAccessMgtStatistics 11 } gs2328pTelnetDiscardedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pAccessMgtStatistics 12 } gs2328pSSHReceivedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pAccessMgtStatistics 13 } gs2328pSSHAllowedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pAccessMgtStatistics 14 } gs2328pSSHDiscardedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { gs2328pAccessMgtStatistics 15 } gs2328pAccessMgtStatisticsClearAll OBJECT-TYPE SYNTAX INTEGER { none(0), clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "0: none 1: clear" ::= { gs2328pAccessMgtStatistics 16 } gs2328pSSH OBJECT IDENTIFIER ::= { gs2328pSecurity 7 } gs2328pSSHMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: disable 1: enable" ::= { gs2328pSSH 1 } gs2328pHTTPS OBJECT IDENTIFIER ::= { gs2328pSecurity 8 } gs2328pHTTPSMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: disable 1: enable" ::= { gs2328pHTTPS 1 } gs2328pHTTPSAutoRedirect OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable" ::= { gs2328pHTTPS 2 } gs2328pHTTPSCertRenew OBJECT-TYPE SYNTAX INTEGER { doNothing(0), renew(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 , 0: doNothing 1: renew" ::= { gs2328pHTTPS 3 } gs2328pAuthMethod OBJECT IDENTIFIER ::= { gs2328pSecurity 9 } gs2328pConsoleAuthMethod OBJECT-TYPE SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: none 1: local 2: RADIUS 3: TACACS+" ::= { gs2328pAuthMethod 1 } gs2328pConsoleFallback OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:disable 1:enable" ::= { gs2328pAuthMethod 2 } gs2328pTelnetAuthMethod OBJECT-TYPE SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: none 1: local 2: RADIUS 3: TACACS+" ::= { gs2328pAuthMethod 3 } gs2328pTelnetFallback OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:disable 1:enable" ::= { gs2328pAuthMethod 4 } gs2328pSshAuthMethod OBJECT-TYPE SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: none 1: local 2: RADIUS 3: TACACS+" ::= { gs2328pAuthMethod 5 } gs2328pSshFallback OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:disable 1:enable" ::= { gs2328pAuthMethod 6 } gs2328pWebAuthMethod OBJECT-TYPE SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: none 1: local 2: RADIUS 3: TACACS+" ::= { gs2328pAuthMethod 7 } gs2328pWebFallback OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:disable 1:enable" ::= { gs2328pAuthMethod 8 } gs2328pTftpAuthMethod OBJECT-TYPE SYNTAX INTEGER { none(0), local(1), radius(2), tacacsplus(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: none 1: local 2: RADIUS 3: TACACS+" ::= { gs2328pAuthMethod 9 } gs2328pTftpFallback OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:disable 1:enable" ::= { gs2328pAuthMethod 10 } gs2328pLoginFailures OBJECT-TYPE SYNTAX Integer32(0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "When login failures mechanism is triggered,the lock minutes will prevent to login in this periods. The value '0' should deactivate this feature. range: 0-99. default: 5." ::= { gs2328pAuthMethod 11 } gs2328pLockMinutes OBJECT-TYPE SYNTAX Integer32(1..99) MAX-ACCESS read-write STATUS current DESCRIPTION "Lock time to login failures trigger. range: 1-99. default: 5." ::= { gs2328pAuthMethod 12 } gs2328pAAA OBJECT IDENTIFIER ::= { gs2328pSecurity 10 } gs2328pAAACommonServer OBJECT IDENTIFIER ::= { gs2328pAAA 1 } gs2328pAAACommonServerTimeout OBJECT-TYPE SYNTAX Integer32(3..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "The Timeout, which can be set to a number between 3 and 3600 seconds, is the maximum time to wait for a reply from a server. If the server does not reply within this timeframe, we will consider it to be dead and continue with the next enabled server (if any). RADIUS servers are using the UDP protocol, which is unreliable by design. In order to cope with lost frames, the timeout interval is divided into 3 subintervals of equal length. If a reply is not received within the subinterval, the request is transmitted again. This algorithm causes the RADIUS server to be queried up to 3 times before it is considered to be dead. default: 15." ::= { gs2328pAAACommonServer 1 } gs2328pAAACommonServerDeadTime OBJECT-TYPE SYNTAX Integer32(0..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "The Dead Time, which can be set to a number between 0 and 3600 seconds, is the period during which the switch will not send new requests to a server that has failed to respond to a previous request. This will stop the switch from continually trying to contact a server that it has already determined as dead. Setting the Dead Time to a value greater than 0 (zero) will enable this feature, but only if more than one server has been configured. default: 300." ::= { gs2328pAAACommonServer 2 } gs2328pAAATACACSPlusAuthAndAccounting OBJECT IDENTIFIER ::= { gs2328pAAA 2 } gs2328pAAAAuthorization OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Authorization is the action of determining what a user is allowed to do. An authorization request may indicate that the user is not authenticated. In this case it is up to the authorization agent to determine if an unauthenticated user is allowed the services in question. " ::= { gs2328pAAATACACSPlusAuthAndAccounting 1 } gs2328pAAAFallbackToLocalAuthorization OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "This function is an auxiliary function of Authorization. When the DUT cannot communicate with TACACS+ Server normally, it will check the right/ permission level of the Local Account to execute the Authorization. " ::= { gs2328pAAATACACSPlusAuthAndAccounting 2 } gs2328pAAAAccounting OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Accounting is typically the third action after authentication and authorization. Accounting is the action of recording what a user is doing, and/or has done. TACACS+ accounting records contain all the information used in the authorization records and resource usage information. " ::= { gs2328pAAATACACSPlusAuthAndAccounting 3 } gs2328pRADIUSAuthenticationServerTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pRADIUSAuthenticationServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pAAA 3 } gs2328pRADIUSAuthenticationServerEntry OBJECT-TYPE SYNTAX Gs2328pRADIUSAuthenticationServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pRADIUSAuthenticationServerIndex } ::= { gs2328pRADIUSAuthenticationServerTable 1 } Gs2328pRADIUSAuthenticationServerEntry ::= SEQUENCE { gs2328pRADIUSAuthenticationServerIndex Integer32, gs2328pRADIUSAuthenticationServerEnable INTEGER, gs2328pRADIUSAuthenticationServerIP DisplayString, gs2328pRADIUSAuthenticationServerPort Integer32, gs2328pRADIUSAuthenticationServerSecret DisplayString } gs2328pRADIUSAuthenticationServerIndex OBJECT-TYPE SYNTAX Integer32(1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "RADIUS Authentication Server index range : 1-5." ::= { gs2328pRADIUSAuthenticationServerEntry 1 } gs2328pRADIUSAuthenticationServerEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the RADIUS Authentication Server. the RADIUSAuthenticationServerEnable can be set, when IP and Secret have value " ::= { gs2328pRADIUSAuthenticationServerEntry 2 } gs2328pRADIUSAuthenticationServerIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address or hostname of the RADIUS Authentication Server. IP address is expressed in dotted decimal notation. " ::= { gs2328pRADIUSAuthenticationServerEntry 3 } gs2328pRADIUSAuthenticationServerPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port to use on the RADIUS Authentication Server. If the port is set to 0 (zero), the default port (1812) is used on the RADIUS Authentication Server. " ::= { gs2328pRADIUSAuthenticationServerEntry 4 } gs2328pRADIUSAuthenticationServerSecret OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The secret - up to 64 characters long - shared between the RADIUS Authentication Server and the switch. " ::= { gs2328pRADIUSAuthenticationServerEntry 5 } gs2328pRADIUSAccountingServerTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pRADIUSAccountingServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pAAA 4 } gs2328pRADIUSAccountingServerEntry OBJECT-TYPE SYNTAX Gs2328pRADIUSAccountingServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pRADIUSAccountingServerIndex } ::= { gs2328pRADIUSAccountingServerTable 1 } Gs2328pRADIUSAccountingServerEntry ::= SEQUENCE { gs2328pRADIUSAccountingServerIndex Integer32, gs2328pRADIUSAccountingServerEnable INTEGER, gs2328pRADIUSAccountingServerIP DisplayString, gs2328pRADIUSAccountingServerPort Integer32, gs2328pRADIUSAccountingServerSecret DisplayString } gs2328pRADIUSAccountingServerIndex OBJECT-TYPE SYNTAX Integer32(1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "RADIUS Accounting Server index range : 1-5." ::= { gs2328pRADIUSAccountingServerEntry 1 } gs2328pRADIUSAccountingServerEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the RADIUS Accounting Server. The RADIUSAccountingServerEnable can be set, when IP and Secret have value. " ::= { gs2328pRADIUSAccountingServerEntry 2 } gs2328pRADIUSAccountingServerIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address or hostname of the RADIUS Accounting Server. IP address is expressed in dotted decimal notation. " ::= { gs2328pRADIUSAccountingServerEntry 3 } gs2328pRADIUSAccountingServerPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port to use on the RADIUS Accounting Server. If the port is set to 0 (zero), the default port (1812) is used on the RADIUS Accounting Server. " ::= { gs2328pRADIUSAccountingServerEntry 4 } gs2328pRADIUSAccountingServerSecret OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The secret - up to 64 characters long - shared between the RADIUS Accounting Server and the switch. " ::= { gs2328pRADIUSAccountingServerEntry 5 } gs2328pTACACSPlusAuthenticationServerTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pTACACSPlusAuthenticationServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pAAA 5 } gs2328pTACACSPlusAuthenticationServerEntry OBJECT-TYPE SYNTAX Gs2328pTACACSPlusAuthenticationServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pTACACSPlusAuthenticationServerIndex } ::= { gs2328pTACACSPlusAuthenticationServerTable 1 } Gs2328pTACACSPlusAuthenticationServerEntry ::= SEQUENCE { gs2328pTACACSPlusAuthenticationServerIndex Integer32, gs2328pTACACSPlusAuthenticationServerEnable INTEGER, gs2328pTACACSPlusAuthenticationServerIP DisplayString, gs2328pTACACSPlusAuthenticationServerPort Integer32, gs2328pTACACSPlusAuthenticationServerSecret DisplayString } gs2328pTACACSPlusAuthenticationServerIndex OBJECT-TYPE SYNTAX Integer32(1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "TACACSPlus Authentication Server index range : 1-5." ::= { gs2328pTACACSPlusAuthenticationServerEntry 1 } gs2328pTACACSPlusAuthenticationServerEnable OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the TACACSPlus Authentication Server. The TACACSPlusAuthenticationServerEnable can be set, when IP and Secret have value." ::= { gs2328pTACACSPlusAuthenticationServerEntry 2 } gs2328pTACACSPlusAuthenticationServerIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address or hostname of the TACACSPlus Authentication Server. IP address is expressed in dotted decimal notation. " ::= { gs2328pTACACSPlusAuthenticationServerEntry 3 } gs2328pTACACSPlusAuthenticationServerPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port to use on the TACACSPlus Authentication Server. If the port is set to 0 (zero), the default port (1812) is used on the TACACSPlus Authentication Server. " ::= { gs2328pTACACSPlusAuthenticationServerEntry 4 } gs2328pTACACSPlusAuthenticationServerSecret OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The secret - up to 64 characters long - shared between the TACACSPlus Authentication Server and the switch. " ::= { gs2328pTACACSPlusAuthenticationServerEntry 5 } gs2328pRADIUSStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pRADIUSStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { gs2328pAAA 6 } gs2328pRADIUSStatisticsEntry OBJECT-TYPE SYNTAX Gs2328pRADIUSStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pRADIUSAuthStatisticsServerIndex } ::= { gs2328pRADIUSStatisticsTable 1 } Gs2328pRADIUSStatisticsEntry ::= SEQUENCE { gs2328pRADIUSAuthStatisticsServerIndex Integer32, gs2328pRADIUSAuthStatisticsRecPktAccessAccepts Counter32, gs2328pRADIUSAuthStatisticsRecPktAccessRejects Counter32, gs2328pRADIUSAuthStatisticsRecPktAccessChallenges Counter32, gs2328pRADIUSAuthStatisticsRecPktMalformedAccResponses Counter32, gs2328pRADIUSAuthStatisticsRecPktBadAuthenticators Counter32, gs2328pRADIUSAuthStatisticsRecPktUnknownTypes Counter32, gs2328pRADIUSAuthStatisticsRecPktDropped Counter32, gs2328pRADIUSAuthStatisticsTransmitPktAccessRequests Counter32, gs2328pRADIUSAuthStatisticsTransmitPktAccessRetransmissions Counter32, gs2328pRADIUSAuthStatisticsTransmitPktPendingRequests Counter32, gs2328pRADIUSAuthStatisticsTransmitPktTimeouts Counter32, gs2328pRADIUSAuthIP DisplayString, gs2328pRADIUSAuthState DisplayString, gs2328pRADIUSAuthRoundTripTime DisplayString, gs2328pRADIUSAccountingStatisticsRecPktResponses Counter32, gs2328pRADIUSAccountingStatisticsRecPktMalformedResponses Counter32, gs2328pRADIUSAccountingStatisticsRecPktBadAuthenticators Counter32, gs2328pRADIUSAccountingStatisticsRecPktUnknownTypes Counter32, gs2328pRADIUSAccountingStatisticsRecPktDropped Counter32, gs2328pRADIUSAccountingStatisticsTransmitPktRequests Counter32, gs2328pRADIUSAccountingStatisticsTransmitPktRetransmissions Counter32, gs2328pRADIUSAccountingStatisticsTransmitPktPendingRequests Counter32, gs2328pRADIUSAccountingStatisticsTransmitPktTimeouts Counter32, gs2328pRADIUSAccountingIP DisplayString, gs2328pRADIUSAccountingState DisplayString, gs2328pRADIUSAccountingRoundTripTime DisplayString, gs2328pRADIUSStatisticsClear INTEGER } gs2328pRADIUSAuthStatisticsServerIndex OBJECT-TYPE SYNTAX Integer32(1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "RADIUS Authentication Server index range : 1-5." ::= { gs2328pRADIUSStatisticsEntry 1 } gs2328pRADIUSAuthStatisticsRecPktAccessAccepts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Accept packets (valid or invalid) received from the server." ::= { gs2328pRADIUSStatisticsEntry 2 } gs2328pRADIUSAuthStatisticsRecPktAccessRejects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Reject packets (valid or invalid) received from the server." ::= { gs2328pRADIUSStatisticsEntry 3 } gs2328pRADIUSAuthStatisticsRecPktAccessChallenges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Challenge packets (valid or invalid) received from the server. " ::= { gs2328pRADIUSStatisticsEntry 4 } gs2328pRADIUSAuthStatisticsRecPktMalformedAccResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed RADIUS Access-Response packets received from the server. Malformed packets include packets with an invalid length. Bad authenticators or Message Authenticator attributes or unknown types are not included as malformed access responses. " ::= { gs2328pRADIUSStatisticsEntry 5 } gs2328pRADIUSAuthStatisticsRecPktBadAuthenticators OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Response packets containing invalid authenticators or Message Authenticator attributes received from the server." ::= { gs2328pRADIUSStatisticsEntry 6 } gs2328pRADIUSAuthStatisticsRecPktUnknownTypes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets that were received with unknown types from the server on the authentication port and dropped." ::= { gs2328pRADIUSStatisticsEntry 7 } gs2328pRADIUSAuthStatisticsRecPktDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets that were received from the server on the authentication port and dropped for some other reason." ::= { gs2328pRADIUSStatisticsEntry 8 } gs2328pRADIUSAuthStatisticsTransmitPktAccessRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Request packets sent to the server. This does not include retransmissions." ::= { gs2328pRADIUSStatisticsEntry 9 } gs2328pRADIUSAuthStatisticsTransmitPktAccessRetransmissions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Request packets retransmitted to the RADIUS authentication server." ::= { gs2328pRADIUSStatisticsEntry 10 } gs2328pRADIUSAuthStatisticsTransmitPktPendingRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Request packets destined for the server that have not yet timed out or received a response. This variable is incremented when an Access-Request is sent and decremented due to receipt of an Access-Accept, Access-Reject, Access-Challenge, timeout, or retransmission. " ::= { gs2328pRADIUSStatisticsEntry 11 } gs2328pRADIUSAuthStatisticsTransmitPktTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of authentication timeouts to the server. After a timeout, the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a Request as well as a timeout. " ::= { gs2328pRADIUSStatisticsEntry 12 } gs2328pRADIUSAuthIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "IP address and UDP port for the authentication server in question." ::= { gs2328pRADIUSStatisticsEntry 13 } gs2328pRADIUSAuthState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the state of the server. It takes one of the following values: Disabled: The selected server is disabled. Not Ready: The server is enabled, but IP communication is not yet up and running. Ready: The server is enabled, IP communication is up and running, and the RADIUS module is ready to accept access attempts. Dead (X seconds left): Access attempts were made to this server, but it did not reply within the configured timeout. The server has temporarily been disabled, but will get re-enabled when the dead-time expires. The number of seconds left before this occurs is displayed in parentheses. This state is only reachable when more than one server is enabled. " ::= { gs2328pRADIUSStatisticsEntry 14 } gs2328pRADIUSAuthRoundTripTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval (measured in milliseconds) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from the RADIUS authentication server. The granularity of this measurement is 100 ms. A value of 0 ms indicates that there hasn't been round-trip communication with the server yet. " ::= { gs2328pRADIUSStatisticsEntry 15 } gs2328pRADIUSAccountingStatisticsRecPktResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets (valid or invalid) received from the server." ::= { gs2328pRADIUSStatisticsEntry 16 } gs2328pRADIUSAccountingStatisticsRecPktMalformedResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed RADIUS packets received from the server. Malformed packets include packets with an invalid length. Bad authenticators or unknown types are not included as malformed access responses. " ::= { gs2328pRADIUSStatisticsEntry 17 } gs2328pRADIUSAccountingStatisticsRecPktBadAuthenticators OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets containing invalid authenticators received from the server." ::= { gs2328pRADIUSStatisticsEntry 18 } gs2328pRADIUSAccountingStatisticsRecPktUnknownTypes OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets of unknown types that were received from the server on the accounting port." ::= { gs2328pRADIUSStatisticsEntry 19 } gs2328pRADIUSAccountingStatisticsRecPktDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets that were received from the server on the accounting port and dropped for some other reason." ::= { gs2328pRADIUSStatisticsEntry 20 } gs2328pRADIUSAccountingStatisticsTransmitPktRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets sent to the server. This does not include retransmissions." ::= { gs2328pRADIUSStatisticsEntry 21 } gs2328pRADIUSAccountingStatisticsTransmitPktRetransmissions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets retransmitted to the RADIUS accounting server." ::= { gs2328pRADIUSStatisticsEntry 22 } gs2328pRADIUSAccountingStatisticsTransmitPktPendingRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets destined for the server that have not yet timed out or received a response. This variable is incremented when a Request is sent and decremented due to receipt of a Response, timeout, or retransmission. " ::= { gs2328pRADIUSStatisticsEntry 23 } gs2328pRADIUSAccountingStatisticsTransmitPktTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of accounting timeouts to the server. After a timeout, the client may retry to the same server, send to a different server, or give up. A retry to the same server is counted as a retransmit as well as a timeout. A send to a different server is counted as a Request as well as a timeout. " ::= { gs2328pRADIUSStatisticsEntry 24 } gs2328pRADIUSAccountingIP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "IP address and UDP port for the accounting server in question." ::= { gs2328pRADIUSStatisticsEntry 25 } gs2328pRADIUSAccountingState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Shows the state of the server. It takes one of the following values: Disabled: The selected server is disabled. Not Ready: The server is enabled, but IP communication is not yet up and running. Ready: The server is enabled, IP communication is up and running, and the RADIUS module is ready to accept accounting attempts. Dead (X seconds left): Accounting attempts were made to this server, but it did not reply within the configured timeout. The server has temporarily been disabled, but will get re-enabled when the dead-time expires. The number of seconds left before this occurs is displayed in parentheses. This state is only reachable when more than one server is enabled. " ::= { gs2328pRADIUSStatisticsEntry 26 } gs2328pRADIUSAccountingRoundTripTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval (measured in milliseconds) between the most recent Response and the Request that matched it from the RADIUS accounting server. The granularity of this measurement is 100 ms. A value of 0 ms indicates that there hasn't been round-trip communication with the server yet. " ::= { gs2328pRADIUSStatisticsEntry 27 } gs2328pRADIUSStatisticsClear OBJECT-TYPE SYNTAX INTEGER(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Clears the counters for the server. read: always 0 clear: set 1" ::= { gs2328pRADIUSStatisticsEntry 28 } gs2328pNAS OBJECT IDENTIFIER ::= { gs2328pSecurity 11 } gs2328pNASConfiguration OBJECT IDENTIFIER ::= { gs2328pNAS 1 } gs2328pNASConfigMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if NAS is globally enabled or disabled on the switch. If globally disabled, all ports are allowed forwarding of frames." ::= { gs2328pNASConfiguration 1 } gs2328pNASConfigReauthEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "If checked, successfully authenticated supplicants/clients are reauthenticated after the interval specified by the Reauthentication Period. Reauthentication for 802.1X-enabled ports can be used to detect if a new device is plugged into a switch port or if a supplicant is no longer attached. For MAC-based ports, reauthentication is only useful if the RADIUS server configuration has changed. It does not involve communication between the switch and the client, and therefore doesn't imply that a client is still present on a port." ::= { gs2328pNASConfiguration 2 } gs2328pNASConfigReauthPeriod OBJECT-TYPE SYNTAX Integer32(1..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the period, in seconds, after which a connected client must be reauthenticated. This is only active if the Reauthentication Enabled checkbox is checked. range: 1 - 3600 seconds." ::= { gs2328pNASConfiguration 3 } gs2328pNASConfigEAPOLTimeout OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the time for retransmission of Request Identity EAPOL frames. This has no effect for MAC-based ports. range: 1 - 65535 seconds." ::= { gs2328pNASConfiguration 4 } gs2328pNASConfigAgingPeriod OBJECT-TYPE SYNTAX Integer32(10..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "When the NAS module uses the Port Security module to secure MAC addresses, the Port Security module needs to check for activity on the MAC address in question at regular intervals and free resources if no activity is seen within a given period of time. Admin State supported : Single, Multi and MAC-Based Auth. 802.1X. range: 10 - 1000000 seconds." ::= { gs2328pNASConfiguration 5 } gs2328pNASConfigHoldTime OBJECT-TYPE SYNTAX Integer32(10..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "If a client is denied access - either because the RADIUS server denies the client access or because the RADIUS server request times out - the client is put on hold in the Unauthorized state. The hold timer does not count during an on-going authentication. In MAC-based Auth. mode, the switch will ignore new frames coming from the client during the hold time. Admin State supported : Single, Multi and MAC-Based Auth. 802.1X. range: 10 - 1000000 seconds." ::= { gs2328pNASConfiguration 6 } gs2328pNASConfigRADIUSAssignedQoSEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "RADIUS-assigned QoS provides a means to centrally control the traffic class to which traffic coming from a successfully authenticated supplicant is assigned on the switch. The RADIUS server must be configured to transmit special RADIUS attributes to take advantage of this feature." ::= { gs2328pNASConfiguration 7 } gs2328pNASConfigRADIUSAssignedVLANEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "RADIUS-assigned VLAN provides a means to centrally control the VLAN on which a successfully authenticated supplicant is placed on the switch. Incoming traffic will be classified to and switched on the RADIUS-assigned VLAN. The RADIUS server must be configured to transmit special RADIUS attributes to take advantage of this feature.When enable, the individual ports' ditto setting determine whether RADIUS-assigned VLAN is enabled on that port. When disable, RADIUS-server assigned VLAN is disabled on all ports. " ::= { gs2328pNASConfiguration 8 } gs2328pNASConfigGuestVLANEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "A Guest VLAN is a special VLAN - typically with limited network access - on which 802.1X-unaware clients are placed after a network administrator-defined timeout. The switch follows a set of rules for entering and leaving the Guest VLAN as listed below.When enable, the individual ports' ditto setting determines whether the port can be moved into Guest VLAN. When disable, the ability to move to the Guest VLAN is disabled on all ports. " ::= { gs2328pNASConfiguration 9 } gs2328pNASConfigGuestVLANID OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the value that a port's Port VLAN ID is set to if a port is moved into the Guest VLAN. It is only changeable if the Guest VLAN option is globally enabled. range: 1 - 4094." ::= { gs2328pNASConfiguration 10 } gs2328pNASConfigMaxReauthCount OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of times the switch transmits an EAPOL Request Identity frame without response before considering entering the Guest VLAN is adjusted with this setting. The value can only be changed if the Guest VLAN option is globally enabled. range: 1 - 255." ::= { gs2328pNASConfiguration 11 } gs2328pNASConfigAllowGuestVLANEAPOLSeen OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The switch remembers if an EAPOL frame has been received on the port for the life-time of the port. Once the switch considers whether to enter the Guest VLAN, it will first check if this option is enabled or disabled. If disabled, the switch will only enter the Guest VLAN if an EAPOL frame has not been received on the port for the life-time of the port. If enabled (checked), the switch will consider entering the Guest VLAN even if an EAPOL frame has been received on the port for the life-time of the port.The value can only be changed if the Guest VLAN option is globally enabled." ::= { gs2328pNASConfiguration 12 } gs2328pNASPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pNASPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { gs2328pNASConfiguration 13 } gs2328pNASPortConfigEntry OBJECT-TYPE SYNTAX Gs2328pNASPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pNASPortConfigPort } ::= { gs2328pNASPortConfigTable 1 } Gs2328pNASPortConfigEntry ::= SEQUENCE { gs2328pNASPortConfigPort Integer32, gs2328pNASPortConfigAdminState INTEGER, gs2328pNASPortConfigRADIUSAssignedQoSEnabled INTEGER, gs2328pNASPortConfigRADIUSAssignedVLANEnabled INTEGER, gs2328pNASPortConfigGuestVLANEnabled INTEGER, gs2328pNASPortConfigPortState DisplayString, gs2328pNASPortConfigReauthenticate INTEGER, gs2328pNASPortConfigReinitialize INTEGER } gs2328pNASPortConfigPort OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { gs2328pNASPortConfigEntry 1 } gs2328pNASPortConfigAdminState OBJECT-TYPE SYNTAX INTEGER{ forceAuthorized(1), forceUnauthorized(2), portBased(3), single(4), multi(5), macBased(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "This selection controls the port's authentication mode. 1: Force Authorized, 2: Force Unauthorized, 3: Port-based 802.1X, 4: Single 802.1X, 5: Multi 802.1X, 6: MAC-based Auth." ::= { gs2328pNASPortConfigEntry 2 } gs2328pNASPortConfigRADIUSAssignedQoSEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When RADIUS-Assigned QoS is both globally enabled and enabled (checked) on a given port, the switch reacts to QoS Class information carried in the RADIUS Access-Accept packet transmitted by the RADIUS server when a supplicant is successfully authenticated. If present and valid, traffic received on the supplicant's port will be classified to the given QoS Class. Admin State supported : Port-based and Single 802.1X." ::= { gs2328pNASPortConfigEntry 3 } gs2328pNASPortConfigRADIUSAssignedVLANEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When RADIUS-Assigned VLAN is both globally enabled and enabled (checked) for a given port, the switch reacts to VLAN ID information carried in the RADIUS Access-Accept packet transmitted by the RADIUS server when a supplicant is successfully authenticated. If present and valid, the port's Port VLAN ID will be changed to this VLAN ID, the port will be set to be a member of that VLAN ID, and the port will be forced into VLAN unaware mode. Once assigned, all traffic arriving on the port will be classified and switched on the RADIUS-assigned VLAN ID. Admin State supported : Port-based and Single 802.1X." ::= { gs2328pNASPortConfigEntry 4 } gs2328pNASPortConfigGuestVLANEnabled OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "When Guest VLAN is both globally enabled and enabled (checked) for a given port, the switch considers moving the port into the Guest VLAN according to the rules outlined below. Admin State supported : Port-based , Single and Multi 802.1X." ::= { gs2328pNASPortConfigEntry 5 } gs2328pNASPortConfigPortState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Globally Disabled: NAS is globally disabled. Link Down: NAS is globally enabled, but there is no link on the port. Authorized: The port is in Force Authorized or a single-supplicant mode and the supplicant is authorized. Unauthorized: The port is in Force Unauthorized or a single-supplicant mode and the supplicant is not successfully authorized by the RADIUS server. X Auth/Y Unauth: The port is in a multi-supplicant mode. Currently X clients are authorized and Y are unauthorized." ::= { gs2328pNASPortConfigEntry 6 } gs2328pNASPortConfigReauthenticate OBJECT-TYPE SYNTAX INTEGER { doNothing(0), do(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Schedules a reauthentication whenever the quiet-period of the port runs out (EAPOL-based authentication). For MAC-based authentication, reauthentication will be attempted immediately.The button only has effect for successfully authenticated clients on the port and will not cause the clients to get temporarily unauthorized." ::= { gs2328pNASPortConfigEntry 7 } gs2328pNASPortConfigReinitialize OBJECT-TYPE SYNTAX INTEGER { doNothing(0), do(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Forces a reinitialization of the clients on the port and thereby a reauthentication immediately. The clients will transfer to the unauthorized state while the reauthentication is in progress." ::= { gs2328pNASPortConfigEntry 8 } gs2328pNASSwitchStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pNASSwitchStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { gs2328pNAS 2 } gs2328pNASSwitchStatusEntry OBJECT-TYPE SYNTAX Gs2328pNASSwitchStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pNASPortConfigPort } ::= { gs2328pNASSwitchStatusTable 1 } Gs2328pNASSwitchStatusEntry ::= SEQUENCE { gs2328pNASSwitchStatusAdminState DisplayString, gs2328pNASSwitchStatusPortState DisplayString, gs2328pNASSwitchStatusLastSource DisplayString, gs2328pNASSwitchStatusLastID DisplayString, gs2328pNASSwitchStatusQoSClass DisplayString, gs2328pNASSwitchStatusPortVlanID DisplayString } gs2328pNASSwitchStatusAdminState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The port's current administrative state. Refer to NAS Admin State for a description of possible values." ::= { gs2328pNASSwitchStatusEntry 2 } gs2328pNASSwitchStatusPortState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the port. Refer to NAS Port State for a description of the individual states." ::= { gs2328pNASSwitchStatusEntry 3 } gs2328pNASSwitchStatusLastSource OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The source MAC address carried in the most recently received EAPOL frame for EAPOL-based authentication, and the most recently received frame from a new client for MAC-based authentication." ::= { gs2328pNASSwitchStatusEntry 4 } gs2328pNASSwitchStatusLastID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The user name (supplicant identity) carried in the most recently received Response Identity EAPOL frame for EAPOL-based authentication, and the source MAC address from the most recently received frame from a new client for MAC-based authentication." ::= { gs2328pNASSwitchStatusEntry 5 } gs2328pNASSwitchStatusQoSClass OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "QoS Class assigned to the port by the RADIUS server if enabled." ::= { gs2328pNASSwitchStatusEntry 6 } gs2328pNASSwitchStatusPortVlanID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID that NAS has put the port in. The field is blank, if the Port VLAN ID is not overridden by NAS." ::= { gs2328pNASSwitchStatusEntry 7 } gs2328pNASPortStatus OBJECT IDENTIFIER ::= { gs2328pNAS 3 } gs2328pNASPortStatusCountersTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pNASPortStatusCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { gs2328pNASPortStatus 1 } gs2328pNASPortStatusCountersEntry OBJECT-TYPE SYNTAX Gs2328pNASPortStatusCountersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pNASPortConfigPort } ::= { gs2328pNASPortStatusCountersTable 1 } Gs2328pNASPortStatusCountersEntry ::= SEQUENCE { gs2328pNASRxCountersEAPOLTotal Counter32, gs2328pNASRxCountersEAPOLResponseID Counter32, gs2328pNASRxCountersEAPOLResponses Counter32, gs2328pNASRxCountersEAPOLStart Counter32, gs2328pNASRxCountersEAPOLLogoff Counter32, gs2328pNASRxCountersEAPOLInvalidType Counter32, gs2328pNASRxCountersEAPOLInvalidLength Counter32, gs2328pNASTxCountersEAPOLTotal Counter32, gs2328pNASTxCountersEAPOLRequestID Counter32, gs2328pNASTxCountersEAPOLRequests Counter32, gs2328pNASRxBackendServerCountersAccessChallenges Counter32, gs2328pNASRxBackendServerCountersOtherRequests Counter32, gs2328pNASRxBackendServerCountersAuthSuccesses Counter32, gs2328pNASRxBackendServerCountersAuthFailures Counter32, gs2328pNASTxBackendServerCountersResponses Counter32, gs2328pNASLastSupplicantInfoMACAddress DisplayString, gs2328pNASLastSupplicantInfoVlanID Integer32, gs2328pNASLastSupplicantInfoVersion Integer32, gs2328pNASLastSupplicantInfoIdentity DisplayString, gs2328pNASCountersDoClear INTEGER } gs2328pNASRxCountersEAPOLTotal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL frames of any type that have been received by the switch." ::= { gs2328pNASPortStatusCountersEntry 2 } gs2328pNASRxCountersEAPOLResponseID OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL Response Identity frames that have been received by the switch." ::= { gs2328pNASPortStatusCountersEntry 3 } gs2328pNASRxCountersEAPOLResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL response frames (other than Response Identity frames) that have been received by the switch." ::= { gs2328pNASPortStatusCountersEntry 4 } gs2328pNASRxCountersEAPOLStart OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL Start frames that have been received by the switch." ::= { gs2328pNASPortStatusCountersEntry 5 } gs2328pNASRxCountersEAPOLLogoff OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL Logoff frames that have been received by the switch." ::= { gs2328pNASPortStatusCountersEntry 6 } gs2328pNASRxCountersEAPOLInvalidType OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames that have been received by the switch in which the frame type is not recognized." ::= { gs2328pNASPortStatusCountersEntry 7 } gs2328pNASRxCountersEAPOLInvalidLength OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames that have been received by the switch in which the Packet Body Length field is invalid." ::= { gs2328pNASPortStatusCountersEntry 8 } gs2328pNASTxCountersEAPOLTotal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames of any type that have been transmitted by the switch." ::= { gs2328pNASPortStatusCountersEntry 9 } gs2328pNASTxCountersEAPOLRequestID OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL Request Identity frames that have been transmitted by the switch." ::= { gs2328pNASPortStatusCountersEntry 10 } gs2328pNASTxCountersEAPOLRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL Request frames (other than Request Identity frames) that have been transmitted by the switch." ::= { gs2328pNASPortStatusCountersEntry 11 } gs2328pNASRxBackendServerCountersAccessChallenges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based: Counts the number of times that the switch receives the first request from the backend server following the first response from the supplicant. MAC-based: Counts all Access Challenges received from the backend server for this port or client." ::= { gs2328pNASPortStatusCountersEntry 12 } gs2328pNASRxBackendServerCountersOtherRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based: Counts the number of times that the switch sends an EAP Request packet following the first to the supplicant. MAC-based: Not applicable." ::= { gs2328pNASPortStatusCountersEntry 13 } gs2328pNASRxBackendServerCountersAuthSuccesses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the switch receives a success indication. Indicates that the supplicant/client has successfully authenticated to the backend server." ::= { gs2328pNASPortStatusCountersEntry 14 } gs2328pNASRxBackendServerCountersAuthFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the switch receives a failure message. This indicates that the supplicant/client has not authenticated to the backend server. " ::= { gs2328pNASPortStatusCountersEntry 15 } gs2328pNASTxBackendServerCountersResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based: Counts the number of times that the switch attempts to send a supplicant's first response packet to the backend server. Indicates the switch attempted communication with the backend server. Possible retransmissions are not counted. MAC-based: Counts all the backend server packets sent from the switch towards the backend server for a given port or client. Possible retransmissions are not counted." ::= { gs2328pNASPortStatusCountersEntry 16 } gs2328pNASLastSupplicantInfoMACAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the last supplicant/client." ::= { gs2328pNASPortStatusCountersEntry 17 } gs2328pNASLastSupplicantInfoVlanID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID on which the last frame from the last supplicant/client was received." ::= { gs2328pNASPortStatusCountersEntry 18 } gs2328pNASLastSupplicantInfoVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based: The protocol version number carried in the most recently received EAPOL frame. MAC-based: Not applicable." ::= { gs2328pNASPortStatusCountersEntry 19 } gs2328pNASLastSupplicantInfoIdentity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based: The user name (supplicant identity) carried in the most recently received Response Identity EAPOL frame. MAC-based: Not applicable." ::= { gs2328pNASPortStatusCountersEntry 20 } gs2328pNASCountersDoClear OBJECT-TYPE SYNTAX INTEGER { doNothing(0), do(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the counters for the selected port." ::= { gs2328pNASPortStatusCountersEntry 21 } gs2328pNASPortStatusClientsTable OBJECT-TYPE SYNTAX SEQUENCE OF Gs2328pNASPortStatusClientsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { gs2328pNASPortStatus 2 } gs2328pNASPortStatusClientsEntry OBJECT-TYPE SYNTAX Gs2328pNASPortStatusClientsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { gs2328pNASPortConfigPort, gs2328pNASClientsIndex} ::= { gs2328pNASPortStatusClientsTable 1 } Gs2328pNASPortStatusClientsEntry ::= SEQUENCE { gs2328pNASClientsIndex Integer32, gs2328pNASClientsIdentity DisplayString, gs2328pNASClientsMACAddress DisplayString, gs2328pNASClientsVlanID Integer32, gs2328pNASClientsState DisplayString, gs2328pNASClientsLastAuth DisplayString, gs2328pNASRxClientsEAPOLTotal Counter32, gs2328pNASRxClientsEAPOLResponseID Counter32, gs2328pNASRxClientsEAPOLResponses Counter32, gs2328pNASRxClientsEAPOLStart Counter32, gs2328pNASRxClientsEAPOLLogoff Counter32, gs2328pNASRxClientsEAPOLInvalidType Counter32, gs2328pNASRxClientsEAPOLInvalidLength Counter32, gs2328pNASTxClientsEAPOLTotal Counter32, gs2328pNASTxClientsEAPOLRequestID Counter32, gs2328pNASTxClientsEAPOLRequests Counter32, gs2328pNASRxBackendServerClientsAccessChallenges Counter32, gs2328pNASRxBackendServerClientsOtherRequests Counter32, gs2328pNASRxBackendServerClientsAuthSuccesses Counter32, gs2328pNASRxBackendServerClientsAuthFailures Counter32, gs2328pNASTxBackendServerClientsResponses Counter32 } gs2328pNASClientsIndex OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry of client table in the port." ::= { gs2328pNASPortStatusClientsEntry 1 } gs2328pNASClientsIdentity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the identity of the supplicant, as received in the Response Identity EAPOL frame.This isn't available for MAC-based Auth." ::= { gs2328pNASPortStatusClientsEntry 2 } gs2328pNASClientsMACAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Multi 802.1X, this column holds the MAC address of the attached supplicant. MAC-based Auth., this column holds the MAC address of the attached client." ::= { gs2328pNASPortStatusClientsEntry 3 } gs2328pNASClientsVlanID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "This column holds the VLAN ID that the corresponding client is currently secured through the Port Security module." ::= { gs2328pNASPortStatusClientsEntry 4 } gs2328pNASClientsState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The client can either be authenticated or unauthenticated. In the authenticated state, it is allowed to forward frames on the port, and in the unauthenticated state, it is blocked." ::= { gs2328pNASPortStatusClientsEntry 5 } gs2328pNASClientsLastAuth OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the date and time of the last authentication of the client." ::= { gs2328pNASPortStatusClientsEntry 6 } gs2328pNASRxClientsEAPOLTotal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL frames of any type that have been received by the switch." ::= { gs2328pNASPortStatusClientsEntry 7 } gs2328pNASRxClientsEAPOLResponseID OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL Response Identity frames that have been received by the switch." ::= { gs2328pNASPortStatusClientsEntry 8 } gs2328pNASRxClientsEAPOLResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL response frames (other than Response Identity frames) that have been received by the switch." ::= { gs2328pNASPortStatusClientsEntry 9 } gs2328pNASRxClientsEAPOLStart OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL Start frames that have been received by the switch." ::= { gs2328pNASPortStatusClientsEntry 10 } gs2328pNASRxClientsEAPOLLogoff OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL Logoff frames that have been received by the switch." ::= { gs2328pNASPortStatusClientsEntry 11 } gs2328pNASRxClientsEAPOLInvalidType OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames that have been received by the switch in which the frame type is not recognized." ::= { gs2328pNASPortStatusClientsEntry 12 } gs2328pNASRxClientsEAPOLInvalidLength OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames that have been received by the switch in which the Packet Body Length field is invalid." ::= { gs2328pNASPortStatusClientsEntry 13 } gs2328pNASTxClientsEAPOLTotal OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames of any type that have been transmitted by the switch." ::= { gs2328pNASPortStatusClientsEntry 14 } gs2328pNASTxClientsEAPOLRequestID OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL Request Identity frames that have been transmitted by the switch." ::= { gs2328pNASPortStatusClientsEntry 15 } gs2328pNASTxClientsEAPOLRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL Request frames (other than Request Identity frames) that have been transmitted by the switch." ::= { gs2328pNASPortStatusClientsEntry 16 } gs2328pNASRxBackendServerClientsAccessChallenges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based: Counts the number of times that the switch receives the first request from the backend server following the first response from the supplicant. MAC-based: Counts all Access Challenges received from the backend server for this port or client." ::= { gs2328pNASPortStatusClientsEntry 17 } gs2328pNASRxBackendServerClientsOtherRequests OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based: Counts the number of times that the switch sends an EAP Request packet following the first to the supplicant. MAC-based: Not applicable." ::= { gs2328pNASPortStatusClientsEntry 18 } gs2328pNASRxBackendServerClientsAuthSuccesses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the switch receives a success indication. Indicates that the supplicant/client has successfully authenticated to the backend server." ::= { gs2328pNASPortStatusClientsEntry 19 } gs2328pNASRxBackendServerClientsAuthFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the switch receives a failure message. This indicates that the supplicant/client has not authenticated to the backend server. " ::= { gs2328pNASPortStatusClientsEntry 20 } gs2328pNASTxBackendServerClientsResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based: Counts the number of times that the switch attempts to send a supplicant's first response packet to the backend server. Indicates the switch attempted communication with the backend server. Possible retransmissions are not counted. MAC-based: Counts all the backend server packets sent from the switch towards the backend server for a given port or client. Possible retransmissions are not counted." ::= { gs2328pNASPortStatusClientsEntry 21 } gs2328pMaintenance OBJECT IDENTIFIER ::= { lancomGS2328P 4 } gs2328pRestartDevice OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:none 1:yes" ::= { gs2328pMaintenance 1 } gs2328pFirmware OBJECT IDENTIFIER ::= { gs2328pMaintenance 2 } gs2328pFirmwareIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the firmware tftp server." ::= { gs2328pFirmware 1 } gs2328pFirmwareFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the path and filename for firmware upgrading." ::= { gs2328pFirmware 2 } gs2328pDoFirmwareUpgrade OBJECT-TYPE SYNTAX INTEGER { doNothing(0), do(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Do firmware upgrade. Get this OID always return zero. 1 - do firmware upgrade. 0 - do nothing." ::= { gs2328pFirmware 3 } gs2328pSaveOrRestore OBJECT IDENTIFIER ::= { gs2328pMaintenance 3 } gs2328pFactoryDefaults OBJECT-TYPE SYNTAX INTEGER { none(0), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:none 1:yes" ::= { gs2328pSaveOrRestore 1 } gs2328pSaveStart OBJECT-TYPE SYNTAX INTEGER { none(0), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:none 1:yes" ::= { gs2328pSaveOrRestore 2 } gs2328pSaveUser OBJECT-TYPE SYNTAX INTEGER { none(0), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:none 1:yes" ::= { gs2328pSaveOrRestore 3 } gs2328pRestoreUser OBJECT-TYPE SYNTAX INTEGER { none(0), yes(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0:none 1:yes" ::= { gs2328pSaveOrRestore 4 } gs2328pExportOrImport OBJECT IDENTIFIER ::= { gs2328pMaintenance 4 } gs2328pExportIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the export tftp server." ::= { gs2328pExportOrImport 1 } gs2328pExportConfigName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the export file path and name." ::= { gs2328pExportOrImport 2 } gs2328pDoExportConfig OBJECT-TYPE SYNTAX INTEGER{ doNothing(0), do(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Do export-config. Get this OID always return zero. 1 - export." ::= { gs2328pExportOrImport 3 } gs2328pImportIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the import tftp server." ::= { gs2328pExportOrImport 4 } gs2328pImportConfigName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the import file path and name." ::= { gs2328pExportOrImport 5 } gs2328pDoImportConfig OBJECT-TYPE SYNTAX INTEGER{ doNothing(0), do(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Do export-config. Get this OID always return zero. 1 - import." ::= { gs2328pExportOrImport 6 } gs2328pDiagnostics OBJECT IDENTIFIER ::= { gs2328pMaintenance 5 } gs2328pPingIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The destination IP Address. " ::= { gs2328pDiagnostics 1 } gs2328pPingSize OBJECT-TYPE SYNTAX Integer32(60..1400) MAX-ACCESS read-write STATUS current DESCRIPTION " Size of ICMP echo packet. range : 60-1400, default : 64. " ::= { gs2328pDiagnostics 2 } gs2328pDoPingConfig OBJECT-TYPE SYNTAX INTEGER{ doNothing(0), do(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Do ping-config. Get this OID always return zero. 1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram to elicit an ICMP ECHO_RESPONSE from a host or gateway. " ::= { gs2328pDiagnostics 3 } gs2328pPingResult OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Show ping result. " ::= { gs2328pDiagnostics 4 } gs2328pPing6IpAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " The destination IPv6 Address. " ::= { gs2328pDiagnostics 5 } gs2328pPing6Size OBJECT-TYPE SYNTAX Integer32(60..1400) MAX-ACCESS read-write STATUS current DESCRIPTION " Size of ICMP echo packet. range : 60-1400. " ::= { gs2328pDiagnostics 6 } gs2328pDoPing6Config OBJECT-TYPE SYNTAX INTEGER{ doNothing(0), do(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Do ping-config. Get this OID always return zero. 1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram to elicit an ICMP ECHO_RESPONSE from a host or gateway. " ::= { gs2328pDiagnostics 7 } gs2328pPing6Result OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Show ping result. " ::= { gs2328pDiagnostics 8 } ------------------------------------------------------------------------------------------------------------------ gs2328pTrap OBJECT IDENTIFIER ::= { lancomGS2328P 5 } gs2328pTrapEvent OBJECT IDENTIFIER ::= { gs2328pTrap 1 } gs2328pEmergency NOTIFICATION-TYPE OBJECTS { gs2328pInformation } STATUS current DESCRIPTION "The severity level is Emergency. The system is unusable." ::= { gs2328pTrapEvent 1 } gs2328pAlert NOTIFICATION-TYPE OBJECTS { gs2328pInformation } STATUS current DESCRIPTION "The severity level is Alert. The action must be taken immediately." ::= { gs2328pTrapEvent 2 } gs2328pCritical NOTIFICATION-TYPE OBJECTS { gs2328pInformation } STATUS current DESCRIPTION "The severity level is Critical. Critical conditions." ::= { gs2328pTrapEvent 3 } gs2328pError NOTIFICATION-TYPE OBJECTS { gs2328pInformation } STATUS current DESCRIPTION "The severity level is Error. Error conditions." ::= { gs2328pTrapEvent 4 } gs2328pWarning NOTIFICATION-TYPE OBJECTS { gs2328pInformation } STATUS current DESCRIPTION "The severity level is Warning. Warning conditions." ::= { gs2328pTrapEvent 5 } gs2328pNotice NOTIFICATION-TYPE OBJECTS { gs2328pInformation } STATUS current DESCRIPTION "The severity level is Notice. Normal but significant condition." ::= { gs2328pTrapEvent 6 } gs2328pInformational NOTIFICATION-TYPE OBJECTS { gs2328pInformation } STATUS current DESCRIPTION "The severity level is Informational. Informational messages." ::= { gs2328pTrapEvent 7 } gs2328pDebug NOTIFICATION-TYPE OBJECTS { gs2328pInformation } STATUS current DESCRIPTION "The severity level is Debug. debug-level messages." ::= { gs2328pTrapEvent 8 } gs2328pTrapVariable OBJECT IDENTIFIER ::= { gs2328pTrap 2 } gs2328pInformation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Trap information." ::= { gs2328pTrapVariable 1 } END